lkml.org 
[lkml]   [2019]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/1] mtd: devices: add ACPI support for non-jedec m25p80
From
Date
On Tue, 2019-02-26 at 11:48 +0100, Flavio Suligoi wrote:
> For the x86 machines a m25p80-compatible device have to be declared using
> an ACPI table (which can be directly a part of the BIOS ACPI tables).
>
> In this case it is necessary to add the device in the "of_device_id" structure
> list, to permit the device name matching by the ACPI kernel functions.
>
> This is an example of a SSDT table for the Everspin mr25h40:
>
> DefinitionBlock ("mr25h40.aml", "SSDT", 5, "ASEMsp", "MR25H40", 1)
> {
> External (_SB.SPI1, DeviceObj)
>
> Scope (\_SB.SPI1)
> {
> Device (NVR0)
> {
> Name (_HID, "PRP0001")
> Name (_DDN, "Everspin MR25H40 MRAM")
> Name (_CRS, ResourceTemplate () {
> SpiSerialBus (
> 1, // Chip select
> PolarityLow, // Chip select is active low
> FourWireMode, // Full duplex
> 8, // Bits per word is 8 (byte)
> ControllerInitiated, // Don't care
> 10000000, // 10 MHz
> ClockPolarityLow, // SPI mode 0 ClockPolarityLow
> ClockPhaseFirst, // SPI mode 0 ClockPhaseFirst
> "\\_SB.SPI1", // SPI host controller
> 0, // Must be 0
> ResourceConsumer,
> ,
> )
> })
>
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"compatible", "mr25h40"},
> }
> })
> }
> }
> }
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>

Why use the specific chip name in the "compatible" property? Why isn't
it using "jedec,spi-nor"?

Does this still actually get passed through to spi_nor_scan()... and is
it *necessary*? Can't the chips be probed?



> ---
>
> v1: - first patch version
>
> drivers/mtd/devices/m25p80.c | 57 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 56 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c4a1d04..b5c7db8 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -312,9 +312,64 @@ MODULE_DEVICE_TABLE(spi, m25p_ids);
> static const struct of_device_id m25p_of_table[] = {
> /*
> * Generic compatibility for SPI NOR that can be identified by the
> - * JEDEC READ ID opcode (0x9F). Use this, if possible.
> + * JEDEC READ ID opcode (0x9F). Use this (jedec,spi-nor), if possible.
> + *
> + * The list of all flash devices is instead necessary in x86 machines,
> + * to use a "non-jedec device" inside the ACPI BIOS tables.
> */
> { .compatible = "jedec,spi-nor" },
> + { .compatible = "s25sl064a" },
> + { .compatible = "w25x16" },
> + { .compatible = "m25p10" },
> + { .compatible = "m25px64" },
> + { .compatible = "at25df321a" },
> + { .compatible = "at25df641" },
> + { .compatible = "at26df081a" },
> + { .compatible = "mx25l4005a" },
> + { .compatible = "mx25l1606e" },
> + { .compatible = "mx25l6405d" },
> + { .compatible = "mx25l12805d" },
> + { .compatible = "mx25l25635e" },
> + { .compatible = "mx66l51235l" },
> + { .compatible = "n25q064" },
> + { .compatible = "n25q128a11" },
> + { .compatible = "n25q128a13" },
> + { .compatible = "n25q512a" },
> + { .compatible = "s25fl256s1" },
> + { .compatible = "s25fl512s" },
> + { .compatible = "s25sl12801" },
> + { .compatible = "s25fl008k" },
> + { .compatible = "s25fl064k" },
> + { .compatible = "sst25vf040b" },
> + { .compatible = "sst25vf016b" },
> + { .compatible = "sst25vf032b" },
> + { .compatible = "sst25wf040" },
> + { .compatible = "m25p40" },
> + { .compatible = "m25p80" },
> + { .compatible = "m25p16" },
> + { .compatible = "m25p32" },
> + { .compatible = "m25p64" },
> + { .compatible = "m25p128" },
> + { .compatible = "w25x80" },
> + { .compatible = "w25x32" },
> + { .compatible = "w25q32" },
> + { .compatible = "w25q32dw" },
> + { .compatible = "w25q80bl" },
> + { .compatible = "w25q128" },
> + { .compatible = "w25q256" },
> + { .compatible = "m25p05-nonjedec" },
> + { .compatible = "m25p10-nonjedec" },
> + { .compatible = "m25p20-nonjedec" },
> + { .compatible = "m25p40-nonjedec" },
> + { .compatible = "m25p80-nonjedec" },
> + { .compatible = "m25p16-nonjedec" },
> + { .compatible = "m25p32-nonjedec" },
> + { .compatible = "m25p64-nonjedec" },
> + { .compatible = "m25p128-nonjedec" },
> + { .compatible = "mr25h128" },
> + { .compatible = "mr25h256" },
> + { .compatible = "mr25h10" },
> + { .compatible = "mr25h40" },
> {}
> };
> MODULE_DEVICE_TABLE(of, m25p_of_table);
> --
> 2.7.4
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

[unhandled content-type:application/x-pkcs7-signature]
\
 
 \ /
  Last update: 2019-03-07 18:41    [W:0.051 / U:1.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site