lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] spi-pxa2xx.c: modify the chip selection timing when spi transfer
From
Date
Hi

On 3/6/19 5:05 AM, xiao jin wrote:
> From: "he, bo" <bo.he@intel.com>
>
> We find spi can't work on board. More debug shows it's related
> to the following patch that changed the chip selection assert and
> deassert timing.
>
^^ timing caught my attention. More below.

> @@ -610,6 +596,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
> if (!pxa25x_ssp_comp(drv_data))
> pxa2xx_spi_write(drv_data, SSTO, 0);
>
> + cs_deassert(drv_data);
> spi_finalize_current_transfer(drv_data->master);

This

> @@ -1070,6 +1057,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *master,
> pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
> }
>
> + cs_assert(drv_data);

and this is not correct with core message loop. It will cause the chip
select is toggled with each transfer in PIO mode. If there is no
cs_change flag set then there shouldn't be CS toggling between the
transfers if SPI message consists of multiple transfers.

More over this patch also will regress with DMA mode since there won't
be CS deassert at all.

Timing reminded me I've seen two cases where there was a timing related
glitch in CS output:

d0283eb2dbc1 ("spi: pxa2xx: Add output control for multiple Intel LPSS
chip selects")
7a8d44bc89e5 ("spi: pxa2xx: Fix too early chipselect deassert")

Do you have a possibility to measure with an oscilloscope what goes
wrong with the CS after d5898e19c0d7 ("spi: pxa2xx: Use core message
processing loop")?

Can you share your setup if I can reproduce it here? E.g. SPI clock
frequency, single or multiple CS, frequency of occurrence, etc

--
Jarkko

\
 
 \ /
  Last update: 2019-03-06 08:53    [W:0.056 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site