lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject[GIT PULL 3/6] ARM: SoC driver updates for 5.1
The following changes since commit f17b5f06cb92ef2250513a1e154c47b78df07d40:

Linux 5.0-rc4 (2019-01-27 15:18:05 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git tags/armsoc-drivers

for you to fetch changes up to 8ceb820b69fe6ff58234ff604146a9e88e6c1974:

Merge tag 'soc-fsl-next-v5.1-4' of
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into
arm/drivers (2019-03-01 15:05:54 +0100)

----------------------------------------------------------------
ARM: SoC driver updates for 5.1

As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.

Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs

One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210

Existing drivers are extended for new SoC variants from NXP,
NVIDIA, Amlogic and Qualcomm.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

----------------------------------------------------------------
Abel Vesa (1):
soc: imx: Break dependency on SOC_IMX8MQ for GPCv2

Aisheng Dong (3):
dt-bindings: fsl: scu: add fallback compatible string for power domain
dt-bindings: fsl: scu: add imx8qm scu power domain support
firmware: imx: scu-pd: add fallback compatible string support

Alexey Khoroshilov (1):
soc: qcom: gsbi: Fix error handling in gsbi_probe()

Amit Kucheria (1):
MAINTAINERS: update list of qcom drivers

Andrey Smirnov (3):
dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
reset: imx7: Add plubming to support multiple IP variants
reset: imx7: Add support for i.MX8MQ IP block variant

Andy Gross (2):
Merge tag 'qcom-fixes-for-5.0-rc1' into drivers-for-5.1
soc: qcom: llcc-slice: Fix typos

Arnd Bergmann (19):
Merge tag 'soc-fsl-next-v5.1-2' of
git://git.kernel.org/.../leo/linux into arm/drivers
Merge tag 'zynqmp-soc-for-v5.1' of
https://github.com/Xilinx/linux-xlnx into arm/drivers
Merge tag 'imx-drivers-5.1' of
git://git.kernel.org/.../shawnguo/linux into arm/drivers
Merge tag 'amlogic-drivers' of
git://git.kernel.org/.../khilman/linux-amlogic into arm/drivers
Merge tag 'reset-for-5.1' of
git://git.pengutronix.de/git/pza/linux into arm/drivers
Merge tag 'tegra-for-5.1-firmware' of
git://git.kernel.org/.../tegra/linux into arm/drivers
Merge tag 'tegra-for-5.1-soc' of
git://git.kernel.org/.../tegra/linux into arm/drivers
Merge tag 'tegra-for-5.1-cpufreq' of
git://git.kernel.org/.../tegra/linux into arm/drivers
Merge tag 'tegra-for-5.1-clk' of
git://git.kernel.org/.../tegra/linux into arm/drivers
Merge tag 'hisi-drivers-for-5.1' of
git://github.com/hisilicon/linux-hisi into arm/drivers
Merge tag 'tee-bus-for-5.1' of
https://git.linaro.org/people/jens.wiklander/linux-tee into
arm/drivers
Merge tag 'qcom-drivers-for-5.1' of
git://git.kernel.org/.../agross/linux into arm/drivers
Merge tag 'arm-soc/for-5.1/drivers' of
https://github.com/Broadcom/stblinux into arm/drivers
Merge tag 'drivers_soc_for_5.1' of
git://git.kernel.org/.../ssantosh/linux-keystone into arm/drivers
Merge tag 'qcom-drivers-for-5.1-2' of
git://git.kernel.org/.../agross/linux into arm/drivers
Merge tag 'qcom-drivers-for-5.1-3' of
git://git.kernel.org/.../agross/linux into arm/drivers
Merge tag 'soc-fsl-next-v5.1-3' of
git://git.kernel.org/.../leo/linux into arm/drivers
Merge tag 'tee-misc-for-v5.1' of
https://git.linaro.org/people/jens.wiklander/linux-tee into
arm/drivers
Merge tag 'soc-fsl-next-v5.1-4' of
git://git.kernel.org/.../leo/linux into arm/drivers

Bjorn Andersson (1):
soc: qcom: rpmpd: Drop family A RPM dependency

Colin Ian King (1):
soc: fsl: dpio: fix memory leak of a struct qbman on error exit path

Craig Tatlor (1):
soc: qcom: smd-rpm: Add sdm660 compatible

Dan Carpenter (1):
soc: fsl: dpio: Use after free in dpaa2_dpio_remove()

Daniel Baluta (1):
firmware: imx: Add support to start/stop a CPU

Eric Anholt (5):
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.

Evan Green (2):
soc: qcom: rmtfs-mem: Add class to enable uevents
soc: qcom: rmtfs-mem: Make sysfs attributes world-readable

Florian Fainelli (3):
dt-bindings: reset: Add document for Broadcom STB reset controller
reset: Add Broadcom STB SW_INIT reset controller driver
Merge tag 'tags/bcm2835-drivers-next-2019-02-01' into drivers/next

Horia Geantă (1):
soc: fsl: guts: make fsl_guts_get_svr() static

Igor Opaniuk (1):
tee: add cancellation support to client interface

Ioana Ciocoi Radulescu (2):
soc: fsl: dpio: Add prefetch instruction
soc: fsl: dpio: Change bpid type to u16

Ioana Ciornei (3):
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: dpio: configure cache stashing destination
dpaa2-eth: configure the cache stashing amount on a queue

Jerome Brunet (3):
dt-bindings: amlogic: add new compatible devices to clk_measure
soc: amlogic: clk-measure: add axg and g12a support
dt-bindings: reset: meson: add g12a bindings

Jerome Forissier (1):
tee: optee: update optee_msg.h and optee_smc.h to dual license

John Garry (1):
bus: hisi_lpc: Don't fail probe for unrecognised child devices

Jolly Shah (2):
firmware: xilinx: Implement ZynqMP power management APIs
drivers: soc: xilinx: Add ZynqMP power domain driver

Jon Hunter (1):
soc/tegra: pmc: Make tegra_powergate_is_powered() a local function

Jordan Crouse (2):
qcom: soc: llcc-slice: Clear the global drv_data pointer on error
qcom: soc: llcc-slice: Consolidate some code

Joseph Lo (8):
soc/tegra: fuse: Fix typo in tegra210_init_speedo_data
clk: tegra: dfll: CVB calculation alignment with the regulator
clk: tegra: dfll: support PWM regulator control
clk: tegra: dfll: round down voltages based on alignment
clk: tegra: dfll: add CVB tables for Tegra210
cpufreq: tegra124: do not handle the CPU rail
cpufreq: tegra124: extend to support Tegra210
cpufreq: dt-platdev: add Tegra210 to blacklist

Li Yang (1):
soc: fsl: guts: reuse machine name from device tree

Lucas Stach (2):
soc: imx: gpcv2: handle additional power-down bits in handshake register
soc: imx: gpcv2: handle reset clocks

Mikko Perttunen (1):
soc/tegra: pmc: Support systems where PMC is marked secure

Nathan Chancellor (3):
soc: ti: knav_dma: Use proper enum in pktdma_init_chan
tee: optee: Initialize some structs using memset instead of braces
hwrng: optee: Initialize some structs using memset instead of braces

Nava kishore Manne (6):
firmware: xilinx: Add reset API's
dt-bindings: reset: Add bindings for ZynqMP reset driver
reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.
firmware: xilinx: Add zynqmp_pm_get_chipid() API
dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
nvmem: zynqmp: Added zynqmp nvmem firmware driver

Neil Armstrong (1):
soc: amlogic: canvas: Fix meson_canvas_get when probe failed

Peter De Schrijver (2):
clk: tegra: dfll: registration for multiple SoCs
clk: tegra: dfll: build clk-dfll.c for Tegra124 and Tegra210

Philipp Zabel (3):
MAINTAINERS: use include/linux/reset for reset controller related headers
reset: sunxi: declare sun6i_reset_init in a header file
reset: socfpga: declare socfpga_reset_init in a header file

Rajan Vaja (4):
dt-bindings: soc: Add ZynqMP PM bindings
drivers: soc: xilinx: Add ZynqMP PM driver
dt-bindings: power: Add ZynqMP power domain bindings
firmware: xilinx: Add APIs to control node status/power

Rajendra Nayak (8):
dt-bindings: opp: Introduce opp-level bindings
OPP: Add support for parsing the 'opp-level' property
dt-bindings: power: Add qcom rpm power domain driver bindings
soc: qcom: rpmpd: Add a Power domain driver to model corners
soc: qcom: rpmpd: Add support for get/set performance state
soc: qcom: rpmhpd: Add RPMh power domain driver
soc: qcom: rpmhpd: Mark mx as a parent for cx
soc: qcom: update config dependencies for QCOM_RPMPD

Raju P.L.S.S.S.N (1):
drivers: qcom: rpmh: avoid sending sleep/wake sets immediately

Stefan Wahren (3):
soc: bcm2835: sync firmware properties with downstream
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm: Make PM driver default for BCM2835

Stephen Boyd (1):
soc: qcom: rpmh: Avoid accessing freed memory from batch API

Sumit Garg (5):
tee: add supp_nowait flag in tee_context struct
tee: add bus driver framework for TEE based devices
tee: optee: add TEE bus device enumeration support
hwrng: add OP-TEE based rng driver
tee: fix possible error pointer ctx dereferencing

Sven Van Asbroeck (3):
dt-bindings: bus: imx-weim: document multiple address ranges per
child node
bus: imx-weim: support multiple address ranges per child node
bus: imx-weim: guard against timing configuration conflicts

Thierry Reding (9):
soc/tegra: pmc: Use TEGRA186_ prefix for GPIO names
soc/tegra: pmc: Sort includes alphabetically
soc/tegra: pmc: Add missing kerneldoc
firmware: tegra: bpmp-tegra186: Remove unused includes
soc/tegra: pmc: Pass struct tegra_pmc * where possible
soc/tegra: pmc: Make alignment consistent
soc/tegra: pmc: Explicitly initialize all fields
firmware: tegra: Conditionally support SoC generations
firmware/tegra: Enable Tegra186 BPMP support on Tegra194

Timo Alho (4):
soc/tegra: fuse: Fix illegal free of IO base address
firmware: tegra: Reword messaging terminology
firmware: tegra: Refactor BPMP driver
firmware: tegra: add bpmp driver for Tegra210

Wei Yongjun (3):
soc: bcm: bcm2835-pm: Make local symbol static
clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
hwrng: make symbol 'optee_rng_id_table' static

Yangtao Li (1):
firmware: ti_sci: Change to use DEFINE_SHOW_ATTRIBUTE macro

YueHaibing (2):
hwrng: Fix unsigned comparison with less than zero
tee: optee: Fix unsigned comparison with less than zero

wen yang (1):
soc: amlogic: add missing of_node_put()

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 8 +-
Documentation/devicetree/bindings/bus/imx-weim.txt | 32 ++-
Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt | 46 ++++
Documentation/devicetree/bindings/opp/opp.txt | 3 +
Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt | 3 +
Documentation/devicetree/bindings/power/qcom,rpmpd.txt |
145 +++++++++++++
Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt | 25 +++
Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt | 34 +++
Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt | 27 +++
Documentation/devicetree/bindings/reset/fsl,imx7-src.txt | 7 +-
Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt | 52 +++++
Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt | 2 +
Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ++++
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 1 +
MAINTAINERS | 38 +++-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 -
arch/arm/boot/dts/bcm283x.dtsi | 17 +-
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm/mach-socfpga/socfpga.c | 3 +-
arch/arm/mach-sunxi/sunxi.c | 2 +-
drivers/bus/fsl-mc/fsl-mc-allocator.c | 11 +
drivers/bus/fsl-mc/mc-io.c | 13 ++
drivers/bus/hisi_lpc.c | 5 +-
drivers/bus/imx-weim.c |
70 ++++--
drivers/char/hw_random/Kconfig | 15 ++
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/optee-rng.c |
306 ++++++++++++++++++++++++++
drivers/clk/tegra/Kconfig | 5 +
drivers/clk/tegra/Makefile | 2 +-
drivers/clk/tegra/clk-dfll.c |
459 +++++++++++++++++++++++++++++++++------
drivers/clk/tegra/clk-dfll.h | 6 +-
drivers/clk/tegra/clk-tegra124-dfll-fcpu.c |
520 ++++++++++++++++++++++++++++++++++++++++++--
drivers/clk/tegra/cvb.c | 12 +-
drivers/clk/tegra/cvb.h | 7 +-
drivers/cpufreq/Kconfig.arm | 4 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
drivers/cpufreq/tegra124-cpufreq.c | 44 +---
drivers/crypto/caam/caamalg_qi2.c | 6 +-
drivers/firmware/imx/misc.c | 38 ++++
drivers/firmware/imx/scu-pd.c | 1 +
drivers/firmware/raspberrypi.c | 11 +
drivers/firmware/tegra/Makefile | 3 +
drivers/firmware/tegra/bpmp-private.h | 34 +++
drivers/firmware/tegra/bpmp-tegra186.c |
305 ++++++++++++++++++++++++++
drivers/firmware/tegra/bpmp-tegra210.c |
243 +++++++++++++++++++++
drivers/firmware/tegra/bpmp.c |
376 +++++++++++++-------------------
drivers/firmware/ti_sci.c | 21 +-
drivers/firmware/xilinx/Kconfig | 1 +
drivers/firmware/xilinx/zynqmp.c |
166 ++++++++++++++
drivers/mfd/Makefile | 1 +
drivers/mfd/bcm2835-pm.c |
92 ++++++++
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 16 +-
drivers/nvmem/Kconfig | 10 +
drivers/nvmem/Makefile | 2 +
drivers/nvmem/zynqmp_nvmem.c |
86 ++++++++
drivers/opp/core.c | 18 ++
drivers/opp/of.c | 2 +
drivers/opp/opp.h | 2 +
drivers/reset/Kconfig | 12 +-
drivers/reset/Makefile | 2 +
drivers/reset/reset-brcmstb.c |
132 +++++++++++
drivers/reset/reset-imx7.c |
172 +++++++++++++--
drivers/reset/reset-socfpga.c | 2 +-
drivers/reset/reset-sunxi.c | 1 +
drivers/reset/reset-zynqmp.c |
114 ++++++++++
drivers/soc/amlogic/meson-canvas.c | 18 +-
drivers/soc/amlogic/meson-clk-measure.c |
196 +++++++++++++++++
drivers/soc/bcm/Kconfig | 12 +
drivers/soc/bcm/Makefile | 1 +
drivers/soc/bcm/bcm2835-power.c |
661 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/soc/fsl/Kconfig | 1 +
drivers/soc/fsl/dpio/dpio-cmd.h | 6 +
drivers/soc/fsl/dpio/dpio-driver.c |
93 ++++++--
drivers/soc/fsl/dpio/dpio-service.c | 46 +++-
drivers/soc/fsl/dpio/dpio.c | 39 ++++
drivers/soc/fsl/dpio/dpio.h | 9 +
drivers/soc/fsl/dpio/qbman-portal.c | 5 +-
drivers/soc/fsl/guts.c | 10 +-
drivers/soc/imx/Kconfig | 2 +-
drivers/soc/imx/gpcv2.c |
76 ++++++-
drivers/soc/qcom/Kconfig | 18 ++
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/llcc-sdm845.c | 6 +
drivers/soc/qcom/llcc-slice.c |
101 ++++++---
drivers/soc/qcom/qcom_gsbi.c | 7 +-
drivers/soc/qcom/rmtfs_mem.c | 32 ++-
drivers/soc/qcom/rpmh.c | 37 ++--
drivers/soc/qcom/rpmhpd.c |
406 ++++++++++++++++++++++++++++++++++
drivers/soc/qcom/rpmpd.c |
315 +++++++++++++++++++++++++++
drivers/soc/qcom/smd-rpm.c | 1 +
drivers/soc/tegra/fuse/fuse-tegra.c | 12 +-
drivers/soc/tegra/fuse/speedo-tegra210.c | 2 +-
drivers/soc/tegra/pmc.c |
424 ++++++++++++++++++++++++------------
drivers/soc/ti/knav_dma.c | 2 +-
drivers/soc/xilinx/Kconfig | 20 ++
drivers/soc/xilinx/Makefile | 2 +
drivers/soc/xilinx/zynqmp_pm_domains.c |
321 +++++++++++++++++++++++++++
drivers/soc/xilinx/zynqmp_power.c |
178 +++++++++++++++
drivers/tee/optee/Makefile | 1 +
drivers/tee/optee/core.c | 4 +
drivers/tee/optee/device.c |
160 ++++++++++++++
drivers/tee/optee/optee_msg.h | 26 +--
drivers/tee/optee/optee_private.h | 3 +
drivers/tee/optee/optee_smc.h | 26 +--
drivers/tee/optee/supp.c | 10 +-
drivers/tee/tee_core.c |
78 ++++++-
drivers/watchdog/bcm2835_wdt.c | 26 +--
include/dt-bindings/power/qcom-rpmpd.h | 39 ++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 39 ++++
include/dt-bindings/reset/amlogic,meson-g12a-reset.h |
134 ++++++++++++
include/dt-bindings/reset/imx8mq-reset.h |
64 ++++++
include/dt-bindings/reset/xlnx-zynqmp-resets.h |
130 +++++++++++
include/dt-bindings/soc/bcm2835-pm.h | 28 +++
include/linux/firmware/imx/svc/misc.h | 3 +
include/linux/firmware/xlnx-zynqmp.h |
184 ++++++++++++++++
include/linux/fsl/guts.h | 2 -
include/linux/fsl/mc.h | 1 +
include/linux/mfd/bcm2835-pm.h | 14 ++
include/linux/mod_devicetable.h | 9 +
include/linux/pm_opp.h | 7 +
include/linux/reset/socfpga.h | 7 +
include/linux/reset/sunxi.h | 7 +
include/linux/soc/qcom/llcc-qcom.h | 6 +
include/linux/tee_drv.h | 50 ++++-
include/soc/bcm2835/raspberrypi-firmware.h | 4 +
include/soc/fsl/dpaa2-io.h | 15 +-
include/soc/tegra/bpmp.h | 13 +-
include/soc/tegra/pmc.h | 6 -
scripts/mod/devicetable-offsets.c | 3 +
scripts/mod/file2alias.c | 19 ++
130 files changed, 7252 insertions(+), 773 deletions(-)
create mode 100644
Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
create mode 100644
Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
create mode 100644
Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
create mode 100644
Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
create mode 100644
Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
create mode 100644
Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
create mode 100644 drivers/char/hw_random/optee-rng.c
create mode 100644 drivers/firmware/tegra/bpmp-private.h
create mode 100644 drivers/firmware/tegra/bpmp-tegra186.c
create mode 100644 drivers/firmware/tegra/bpmp-tegra210.c
create mode 100644 drivers/mfd/bcm2835-pm.c
create mode 100644 drivers/nvmem/zynqmp_nvmem.c
create mode 100644 drivers/reset/reset-brcmstb.c
create mode 100644 drivers/reset/reset-zynqmp.c
create mode 100644 drivers/soc/bcm/bcm2835-power.c
create mode 100644 drivers/soc/qcom/rpmhpd.c
create mode 100644 drivers/soc/qcom/rpmpd.c
create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c
create mode 100644 drivers/soc/xilinx/zynqmp_power.c
create mode 100644 drivers/tee/optee/device.c
create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-reset.h
create mode 100644 include/dt-bindings/reset/imx8mq-reset.h
create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h
create mode 100644 include/dt-bindings/soc/bcm2835-pm.h
create mode 100644 include/linux/mfd/bcm2835-pm.h
create mode 100644 include/linux/reset/socfpga.h
create mode 100644 include/linux/reset/sunxi.h

\
 
 \ /
  Last update: 2019-03-06 16:35    [W:0.094 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site