lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/8] kasan,x86: Frob kasan_report() in an exception
On Wed, Mar 06, 2019 at 02:39:33PM +0100, Dmitry Vyukov wrote:
> On Wed, Mar 6, 2019 at 2:13 PM Peter Zijlstra <peterz@infradead.org> wrote:

> > annotated:
> >
> > 0000 0000000000000150 <__asan_load1>:
> > 0000 150: 48 b8 ff ff ff ff ff movabs $0xffff7fffffffffff,%rax
> > 0007 157: 7f ff ff
> > 000a 15a: 53 push %rbx
>
> /\/\/\/\/\/\
>
> This push is unpleasant on hot fast path. I think we need to move
> whole report cold path into a separate noinline function as it is now,
> and that function will do the magic with smap. Then this won't prevent
> tail calling and won't affect fast-path codegen.

It's a bit daft of GCC to do that anyway; since it only uses that rbx
thing in the cold path at __asan_load1+0x30.

But yes, that wants fixing or something. Then again; a kernel with KASAN
on is unbearable slow anyway.

> > 000b 15b: 48 8b 4c 24 08 mov 0x8(%rsp),%rcx
> > 0010 160: 48 39 c7 cmp %rax,%rdi
> > 0013 163: 76 24 jbe 189 <__asan_load1+0x39>
> > 0015 165: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
> > 001c 16c: fc ff df
> > 001f 16f: 48 89 fa mov %rdi,%rdx
> > 0022 172: 48 c1 ea 03 shr $0x3,%rdx
> > 0026 176: 0f b6 04 02 movzbl (%rdx,%rax,1),%eax
> > 002a 17a: 84 c0 test %al,%al
> > 002c 17c: 75 02 jne 180 <__asan_load1+0x30>
> > 002e 17e: 5b pop %rbx
> > 002f 17f: c3 retq

^^^ hot path, vvv cold path

> > 0030 180: 89 fa mov %edi,%edx
> > 0032 182: 83 e2 07 and $0x7,%edx
> > 0035 185: 38 d0 cmp %dl,%al
> > 0037 187: 7f f5 jg 17e <__asan_load1+0x2e>
> > 0039 189: 9c pushfq
> > 003a 18a: 5b pop %rbx
> > 003b 18b: 90 nop
> > 003c 18c: 90 nop
> > 003d 18d: 90 nop
> > 003e 18e: 31 d2 xor %edx,%edx
> > 0040 190: be 01 00 00 00 mov $0x1,%esi
> > 0045 195: e8 00 00 00 00 callq 19a <__asan_load1+0x4a>
> > 0046 196: R_X86_64_PLT32 __kasan_report-0x4
> > 004a 19a: 53 push %rbx
> > 004b 19b: 9d popfq
> > 004c 19c: 5b pop %rbx
> > 004d 19d: c3 retq

> > +static __always_inline
> > +void kasan_report(unsigned long addr, size_t size, bool is_write, unsigned long ip)
> > +{
> > + unsigned long flags;
> > +
> > + flags = smap_save();
>
> Previously you said that messing with smap here causes boot errors.
> Shouldn't we do smap_save iff kasan_report_enabled? Otherwise we just
> bail out, so no need to enable/disable smap.
>
> > + __kasan_report(addr, size, is_write, ip);
> > + smap_restore(flags);
> > +
> > +}

Ah, you think I booted this :-) Still, this is only PUSHF;CLAC, which I
think should actually work really early. It was that #UD thing that
didn't work early, simply because we'd not set up the exception vector
yet when first this happens.

> > --- a/mm/kasan/generic_report.c
> > +++ b/mm/kasan/generic_report.c
> > @@ -118,14 +118,14 @@ const char *get_bug_type(struct kasan_ac
> > #define DEFINE_ASAN_REPORT_LOAD(size) \
> > void __asan_report_load##size##_noabort(unsigned long addr) \
> > { \
> > - kasan_report(addr, size, false, _RET_IP_); \
> > + __kasan_report(addr, size, false, _RET_IP_); \
>
> Unless I am missing something, this seems to make this patch no-op. We
> fixed kasan_report for smap, but here we now use __kasan_report which
> is not fixed. So this won't work with smap again?..

I've not found callers of __asan_report_load* with AC=1 in the kernel
yet. Under what condtions does GCC emit calls to these functions?

\
 
 \ /
  Last update: 2019-03-06 14:58    [W:0.445 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site