lkml.org 
[lkml]   [2019]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/8] ARM: dts: qcom: pma8084: add gpio-ranges
Date
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.

This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
arch/arm/boot/dts/qcom-pma8084.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 8f5ea7add20f..ea1ca166165c 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -31,6 +31,7 @@
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pma8084_gpios 0 0 22>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.20.1
\
 
 \ /
  Last update: 2019-03-06 01:54    [W:0.124 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site