lkml.org 
[lkml]   [2019]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] iommu/vt-d: Allow IOMMU_DOMAIN_DMA and IOMMU_DOMAIN_IDENTITY to be allocated
From
Date
Hey Lu,

> On 5 Mar 2019, at 06:46, Lu Baolu <baolu.lu@linux.intel.com> wrote:
>
> Hi,
>
> On 3/4/19 11:46 PM, James Sewart wrote:
>> Allowing IOMMU_DOMAIN_DMA type IOMMU domain to be allocated allows the
>> default_domain of an iommu_group to be set. This delegates device-domain
>> relationships to the generic IOMMU code.
>> Signed-off-by: James Sewart <jamessewart@arista.com>
>> ---
>> drivers/iommu/intel-iommu.c | 113 +++++++++++++++++++++++++++---------
>> 1 file changed, 84 insertions(+), 29 deletions(-)
>> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
>> index 8e0a4e2ff77f..71cd6bbfec05 100644
>> --- a/drivers/iommu/intel-iommu.c
>> +++ b/drivers/iommu/intel-iommu.c
>> @@ -309,6 +309,14 @@ static int hw_pass_through = 1;
>> /* si_domain contains mulitple devices */
>> #define DOMAIN_FLAG_STATIC_IDENTITY (1 << 1)
>> +/* Domain managed externally, don't cleanup if it isn't attached
>> + * to any devices. */
>> +#define DOMAIN_FLAG_MANAGED_EXTERNALLY (1 << 2)
>> +
>> +/* Set after domain initialisation. Used when allocating dma domains to
>> + * defer domain initialisation until it is attached to a device */
>> +#define DOMAIN_FLAG_INITIALISED (1 << 4)
>
> Why do you skip bit 3?

This was an oversight, I will update to use bit 3.

>
>> +
>> #define for_each_domain_iommu(idx, domain) \
>> for (idx = 0; idx < g_num_of_iommus; idx++) \
>> if (domain->iommu_refcnt[idx])
>> @@ -558,6 +566,16 @@ static inline int domain_type_is_vm_or_si(struct dmar_domain *domain)
>> DOMAIN_FLAG_STATIC_IDENTITY);
>> }
>> +static inline int domain_managed_externally(struct dmar_domain *domain)
>> +{
>> + return domain->flags & DOMAIN_FLAG_MANAGED_EXTERNALLY;
>> +}
>> +
>> +static inline int domain_is_initialised(struct dmar_domain *domain)
>> +{
>> + return domain->flags & DOMAIN_FLAG_INITIALISED;
>> +}
>> +
>> static inline int domain_pfn_supported(struct dmar_domain *domain,
>> unsigned long pfn)
>> {
>> @@ -1662,7 +1680,7 @@ static void disable_dmar_iommu(struct intel_iommu *iommu)
>> __dmar_remove_one_dev_info(info);
>> - if (!domain_type_is_vm_or_si(domain)) {
>> + if (!domain_managed_externally(domain)) {
>> /*
>> * The domain_exit() function can't be called under
>> * device_domain_lock, as it takes this lock itself.
>> @@ -1895,6 +1913,7 @@ static int domain_init(struct dmar_domain *domain, struct intel_iommu *iommu,
>> domain->pgd = (struct dma_pte *)alloc_pgtable_page(domain->nid);
>> if (!domain->pgd)
>> return -ENOMEM;
>> + domain->flags |= DOMAIN_FLAG_INITIALISED;
>> __iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE);
>> return 0;
>> }
>> @@ -2807,14 +2826,10 @@ static inline void iommu_prepare_isa(void)
>> static int md_domain_init(struct dmar_domain *domain, int guest_width);
>> -static int __init si_domain_init(int hw)
>> +static int __init si_domain_init(struct dmar_domain *si_domain, int hw)
>> {
>> int nid, ret = 0;
>> - si_domain = alloc_domain(DOMAIN_FLAG_STATIC_IDENTITY);
>> - if (!si_domain)
>> - return -EFAULT;
>> -
>> if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
>> domain_exit(si_domain);
>> return -EFAULT;
>> @@ -3417,9 +3432,16 @@ static int __init init_dmars(void)
>> check_tylersburg_isoch();
>> if (iommu_identity_mapping) {
>> - ret = si_domain_init(hw_pass_through);
>> - if (ret)
>> + si_domain = alloc_domain(DOMAIN_FLAG_STATIC_IDENTITY);
>
> Where will this si_domain be used? We still need to keep the global
> si_domain?

I am unsure of the best thing to do here. The si_domain can be initialised
as a hardware passthrough which means it doesn’t have any mappings applied.
I think any user allocating a domain here will always want a software
passthrough domain. I’m not sure if/how to consolidate these two.

>
>> + if (!si_domain) {
>> + ret = -EFAULT;
>> goto free_iommu;
>> + }
>> + ret = si_domain_init(si_domain, hw_pass_through);
>> + if (ret) {
>> + domain_exit(si_domain);
>> + goto free_iommu;
>> + }
>> }
>> @@ -4575,7 +4597,7 @@ static int device_notifier(struct notifier_block *nb,
>> return 0;
>> dmar_remove_one_dev_info(domain, dev);
>> - if (!domain_type_is_vm_or_si(domain) && list_empty(&domain->devices))
>> + if (!domain_managed_externally(domain) && list_empty(&domain->devices))
>> domain_exit(domain);
>> return 0;
>> @@ -5020,6 +5042,7 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)
>> domain->pgd = (struct dma_pte *)alloc_pgtable_page(domain->nid);
>> if (!domain->pgd)
>> return -ENOMEM;
>> + domain->flags |= DOMAIN_FLAG_INITIALISED;
>> domain_flush_cache(domain, domain->pgd, PAGE_SIZE);
>> return 0;
>> }
>> @@ -5028,28 +5051,54 @@ static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)
>> {
>> struct dmar_domain *dmar_domain;
>> struct iommu_domain *domain;
>> + int flags = DOMAIN_FLAG_MANAGED_EXTERNALLY;
>> - if (type != IOMMU_DOMAIN_UNMANAGED)
>> - return NULL;
>> -
>> - dmar_domain = alloc_domain(DOMAIN_FLAG_VIRTUAL_MACHINE);
>> - if (!dmar_domain) {
>> - pr_err("Can't allocate dmar_domain\n");
>> - return NULL;
>> - }
>> - if (md_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
>> - pr_err("Domain initialization failed\n");
>> - domain_exit(dmar_domain);
>> + switch (type) {
>> + case IOMMU_DOMAIN_UNMANAGED:
>> + flags |= DOMAIN_FLAG_VIRTUAL_MACHINE | DOMAIN_FLAG_INITIALISED;
>> + dmar_domain = alloc_domain(flags);
>> + if (!dmar_domain) {
>> + pr_err("Can't allocate dmar_domain\n");
>> + return NULL;
>> + }
>> + if (md_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
>> + pr_err("Domain initialization failed\n");
>> + domain_exit(dmar_domain);
>> + return NULL;
>> + }
>> + domain_update_iommu_cap(dmar_domain);
>> + domain = &dmar_domain->domain;
>> + domain->geometry.aperture_start = 0;
>> + domain->geometry.aperture_end = __DOMAIN_MAX_ADDR(dmar_domain->gaw);
>> + domain->geometry.force_aperture = true;
>> + break;
>> + case IOMMU_DOMAIN_DMA:
>> + dmar_domain = alloc_domain(flags);
>> + if (!dmar_domain) {
>> + pr_err("Can't allocate dmar_domain\n");
>
> Not necessary for memory allocation failure.

I’ll update in the next revision

>
>> + return NULL;
>> + }
>> + // init domain in device attach when we know IOMMU capabilities
>
> Use /* */ for comments, please.

I’ll update in the next revision

>
>> + break;
>> + case IOMMU_DOMAIN_IDENTITY:
>> + flags |= DOMAIN_FLAG_STATIC_IDENTITY | DOMAIN_FLAG_INITIALISED;
>> + dmar_domain = alloc_domain(flags);
>> + if (!dmar_domain) {
>> + pr_err("Can't allocate dmar_domain\n");
>> + return NULL;
>> + }
>> + if (si_domain_init(dmar_domain, 0)) {
>> + pr_err("Domain initialization failed\n");
>> + domain_exit(dmar_domain);
>> + return NULL;
>> + }
>> + break;
>
> How about moving si domain allocation into a separated patch? There are
> two significant changes here, so it worth a new patch for discussion.
>
> 1) a shared single si domain vs. per group si domain;
> 2) previously vt-d drivers determines what kind of devices should use
> identity domain; Now, it turns to iommu generic layer, behavior will
> be changed.

I’ll move it into another patch. Do you think the global si_domain should
be returned here?

>> + default:
>> return NULL;
>> }
>> - domain_update_iommu_cap(dmar_domain);
>> -
>> - domain = &dmar_domain->domain;
>> - domain->geometry.aperture_start = 0;
>> - domain->geometry.aperture_end = __DOMAIN_MAX_ADDR(dmar_domain->gaw);
>> - domain->geometry.force_aperture = true;
>> - return domain;
>> + dmar_domain->domain.type = type;
>
> Is it necessary to set this?

It isn’t I’ll remove this for the next revision.

>
>> + return &dmar_domain->domain;
>> }
>> static void intel_iommu_domain_free(struct iommu_domain *domain)
>> @@ -5080,8 +5129,8 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
>> dmar_remove_one_dev_info(old_domain, dev);
>> rcu_read_unlock();
>> - if (!domain_type_is_vm_or_si(old_domain) &&
>> - list_empty(&old_domain->devices))
>> + if (list_empty(&old_domain->devices) &&
>> + !domain_managed_externally(old_domain))
>> domain_exit(old_domain);
>> }
>> }
>> @@ -5090,6 +5139,12 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
>> if (!iommu)
>> return -ENODEV;
>> + // Initialise domain with IOMMU capabilities if it isn't already initialised
>
> Ditto.
>
>> + if (!domain_is_initialised(dmar_domain)) {
>> + if (domain_init(dmar_domain, iommu, DEFAULT_DOMAIN_ADDRESS_WIDTH))
>> + return -ENOMEM;
>> + }
>
> Each domain, not matter the DMA domain or UNMANAGED domain, is allocated
> first and then gets initialized during device attaching, right? If so,
> why do we need to have a special DOMAIN_FLAG_INITIALISED flag for DMA
> domains?

Only the DMA domain is initialised on attach, UNMANAGED and IDENTITY
initialises with the lowest common denominator of the parameters of all
attached IOMMUs using domain_update_iommu_cap.

>
>> +
>> /* check if this iommu agaw is sufficient for max mapped address */
>> addr_width = agaw_to_width(iommu->agaw);
>> if (addr_width > cap_mgaw(iommu->cap))
>
> Best regards,
> Lu Baolu

Cheers,
James.
\
 
 \ /
  Last update: 2019-03-05 12:37    [W:0.154 / U:1.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site