Messages in this thread | | | Subject | Re: [PATCH v4 00/10] Add basic support for Socionext Milbeaut M10V SoC | From | "Sugaya, Taichi" <> | Date | Mon, 4 Mar 2019 14:18:11 +0900 |
| |
Hi,
On 2019/03/01 23:34, Arnd Bergmann wrote: > On Wed, Feb 27, 2019 at 5:51 AM Sugaya Taichi > <sugaya.taichi@socionext.com> wrote: >> >> Hi, >> >> Here is the series of patches the initial support for SC2000(M10V) of >> Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in >> source code. >> >> SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for >> computer vision. It also features advanced functionalities such as 360-degree, >> real-time spherical stitching with multi cameras, image stabilization for >> without mechanical gimbals, and rolling shutter correction. More detail is >> below: >> https://www.socionext.com/en/products/assp/milbeaut/SC2000.html >> >> Specifications for developers are below: >> - Quad-core 32bit Cortex-A7 on ARMv7-A architecture >> - NEON support >> - DSP >> - GPU >> - MAX 3GB DDR3 >> - Cortex-M0 for power control >> - NAND Flash Interface >> - SD UHS-I >> - SD UHS-II >> - SDIO >> - USB2.0 HOST / Device >> - USB3.0 HOST / Device >> - PCI express Gen2 >> - Ethernet Engine >> - I2C >> - UART >> - SPI >> - PWM >> >> Support is quite minimal for now, since it only includes timer, clock, >> pictrl and serial controller drivers, so we can only boot to userspace >> through initramfs. Support for the other peripherals will come eventually. > > I've merged these all into the arm/newsoc branch now, with the > exception of the patch that Greg has already taken. > > I'll do a little more build testing before that branch will be sent, > but I expect it will be fine. > > Arnd >
Thanks a lot!
| |