lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 8/9] mtd: rawnand: ingenic: Add support for the JZ4725B

On Mon, Mar 4, 2019 at 11:35 AM, Miquel Raynal
<miquel.raynal@bootlin.com> wrote:
> Hi Paul,
>
> Paul Cercueil <paul@crapouillou.net <mailto:paul@crapouillou.net>>
> wrote on Sat, 9 Feb 2019 16:23:04
> -0300:
>
>> The boot ROM of the JZ4725B SoC expects a specific OOB layout on the
>> NAND, so we use it unconditionally in the ingenic-nand driver.
>>
>> Also add the jz4725b-bch driver to support the JZ4725B-specific BCH
>> hardware.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net
>> <mailto:paul@crapouillou.net>>
>> ---
>>
>> Changes:
>>
>> v2: Instead of forcing the OOB layout, leave it to the board code or
>> devicetree to decide if the jz4725b-specific layout should be
>> used
>> or not.
>>
>> v3: - Revert the change in v2, as the previous behaviour was
>> correct.
>> - Also add support for the hardware BCH of the JZ4725B in this
>> patch.
>>
>> v4: - Add MODULE_* macros
>> - Add tweaks suggested by upstream feedback
>>
>> drivers/mtd/nand/raw/ingenic/Kconfig | 10 +
>> drivers/mtd/nand/raw/ingenic/Makefile | 1 +
>> drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 48 ++++-
>> drivers/mtd/nand/raw/ingenic/jz4725b_bch.c | 292
>> ++++++++++++++++++++++++++++
>> 4 files changed, 350 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
>>
>
> [...]
>
>> +static int jz4725b_calculate(struct ingenic_ecc *bch,
>> + struct ingenic_ecc_params *params,
>> + const u8 *buf, u8 *ecc_code)
>> +{
>> + int ret;
>> +
>> + mutex_lock(&bch->lock);
>> + ret = jz4725b_bch_init(bch, params, true);
>
> I really don't like this bch_init name. A BCH initialization is what
> is
> supposed to be done only once (probably at boot time), can you find a
> better name or a better organization of the correct/calculate path?

jz4725b_bch_setup() maybe?

>> + if (ret) {
>> + dev_err(bch->dev, "Unable to init BCH with given parameters\n");
>> + goto out_disable;
>> + }
>> +
>> + jz4725b_bch_write_data(bch, buf, params->size);
>> +
>> + ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
>> + if (ret) {
>> + dev_err(bch->dev, "timed out while calculating ECC\n");
>> + goto out_disable;
>> + }
>> +
>> + jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
>> +
>> +out_disable:
>> + jz4725b_bch_disable(bch);
>> + mutex_unlock(&bch->lock);
>> +
>> + return ret;
>> +}
>> +
>
> [...]
>
> Thanks,
> Miquèl


\
 
 \ /
  Last update: 2019-03-04 19:31    [W:0.064 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site