lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
Date
On 2019-03-02 14:47, Wolfram Sang wrote:
> So, finally, here is the second RFC for supporting I2C transfers in atomic
> contexts (i.e. very late). This will need some text because I tried some things
> on the way but had to discard them. However, I think it is important to have
> that documented.
>
> One thing I really wanted to have is a kind of whitelist for devices which are
> allowed to use atomic transfers. So we could identify the "unauthorized" ones
> as buggy. To be useful, this should not add new API calls for transfers,
> otherwise things would have become way more complicated for I2C users like
> regmap. So, I tried e.g. to flag clients and provide that information
> throughout the i2c tree (think muxes here). In the end, I concluded that this
> is not an I2C specific problem, so it can't have an I2C specifc solution.
> Imagine a GPIO which is needed to reboot (drivers/power/reset/gpio-restart.c).
> This is the device which needs to whitelisted but the driver doesn't even know
> if the GPIO is behind I2C or not. So, if we want this, it should probably be
> handled on 'struct device' level. Including all the hierarchy. Postponed.
>
> So, this RFC v2 is much more similar to v1 than I expected. Main changes:
>
> * cleaned up 'struct i2c_adapter' a bit before adding the new stuff
> * added an atomic callback for SMBus, too. Only build-tested so far. But spent
> a few braincells of getting the SMBus logic readable because we could have
> an I2C fallback just for the atomic case
> * add a WARN for atomic transfers with no atomic transfer handler
> * added support for the i2c-demuxer, so I could test the series. Support
> for I2C muxes is missing because of the locking issue (see later) which
> may mean a redesign anyhow
> * imported the omap support into this series to have another user. I didn't
> pick up the patch for imx from Stefan because it is bigger and probably
> needs seperate review first
> * I converted the tegra-bpmp driver which already had handling for the atomic
> case*. I did not convert the pxa driver which has a polling-only mode, too.
> This also seems like a bigger task and its current behaviour shouldn't be
> affected by this series. *only build tested
> * added a HACK to allow the i2c-gpio driver atomic transfers. This will only
> work if accessing the GPIO can be done in atomic contexts, too, so this is
> for testing only
>
> For the regular cases this series works well on my Renesas Lager board*
> which needs an I2C access to the PMIC to reboot the board. *if I use the
> i2c-gpio driver, the i2c-sh_mobile is not converted yet.
>
> However, during the last review, Russell King brought up an interesting corner
> case. What if we want to reboot because of a panic and the bus is not in a
> consistent state? To create this situation, I recently created the 'inject-panic'
> fault injector [1] which is merged into i2c/for-next meanwhile.
>
> With this fault injector and 'reboot after panic' settings, I can create
> the problem Russell described: a) the bus is in an inconsistent state because
> the driver was interrupted (SCL/SDA both low) and b) the lock for this driver
> is taken, so trylock fails.
>
> I think b) is an interesting question: shall we give atomic transfers priority
> and ignore the lock? Do we need a seperate one then (SMP is turned off already,
> or?)? If so, that would probably mean way more complicated mux-locking code
> (Peter?)? And what if some mux in the path needs interrupts? And how academic
> is all that? Because someone putting the reboot functionality behind muxed I2C
> is kind of asking for problems :)
>
> That being said: this is an issue I think it is worth tackling. However, this
> issue is not introduced by this series. It is already there. It might just
> become more visible.

The way I read this series, you are not giving atomic transfers priority. The
only thing that happens is that if an xfer happens in atomic/irq context,
trylock is used instead of an ordinary (unconditional) lock (this is just
like it is already). If a mux is sitting in between the client device and
the root adapter, the trylock operation will percolate to the root. Sure,
there are more trylock ops that may fail and abort the xfer, but if
everything is uncontended, then things should proceed in orderly fashion.
Also, sure, the mux may need additional resources that are no longer
available if the machine is half way down (or worse). But I don't see any
fundamental *locking* issue with muxes that is different from the case
without a mux.

That said, if you then want to introduce xfers that want to circumvent the
locking, then parent-locked muxes are easier since the actual muxing operation
is performed as an unlocked xfer (if one is needed) while the client device
has grabbed the adapter lock "from the outside". Sure, there is a list of
locks going up through the adapter tree to handle, but that can probably be
handled in one place. I.e. the locking must have been avoided prior to the
actual muxing operation, but the code to do so can be in one place. The
mux-locked case is where the trouble is, since the muxing operation is done
as a normal xfer and needs to be classified as a special xfer that just like
the original client xfer also needs to break through any existing locks in
the adapter tree. And those muxing xfers might come from anywhere, e.g.

- IO-expander controlling a gpio/pinctrl mux
- dedicated I2C mux (e.g. the LTC4306)
- regmap device
- etc, who knows what muxing options will evolve?

So, any scheme that require a white-list will work poorly for mux-locked
muxes, unless you can add some new grip/pinctrl/regmap flags to
gpios/pins/registers so that the particular accesses can be white-listed.
Adding those flags seem rather invasive?

But of course, you need to actually do something about the added FIXME in
the demux-pinctrl driver... BTW, that driver should forward ->smbus_xfer
just like it does for ->master_xfer, no?

Cheers,
Peter

> Sidenote: I think problem a) is easier once we solved b). E.g. if we decide on
> a higher priority, we can postulate that IP cores should be reset first and
> bus recovery can also be applied. This will not help all cases but IMO is all
> we can do.
>
> Another topic where I'd like input from other people is the use of 'in_atomic'
> in this series. It was already there, so I kept it to avoid regressions. I am
> aware that 'in_atomic' should not be used in drivers. So, if someone has
> expertise to say if it can be removed or replaced with something else, I am
> all ears.
>
> A branch (based on i2c/for-next) can be found here:
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/i2c/atomic_xfer
>
> Sorry, no TLDR; text here - I think this topic deserves a few words ;)
>
> Looking forward to comments, thanks!
>
> Wolfram
>
>
> [1] http://patchwork.ozlabs.org/patch/1044789/
>
>
> Tero Kristo (1):
> i2c: busses: omap: Add the master_xfer_irqless hook
>
> Wolfram Sang (6):
> i2c: apply coding style for struct i2c_adapter
> i2c: core: use I2C locking behaviour also for SMBUS
> i2c: core: introduce callbacks for atomic transfers
> i2c: demux: WIP: handle the new atomic callbacks
> i2c: tegra-bpmp: convert to use new atomic callbacks
> i2c: algo: bit: HACK! add atomic callback
>
> drivers/i2c/algos/i2c-algo-bit.c | 5 ++-
> drivers/i2c/busses/i2c-omap.c | 79 +++++++++++++++++++++++++++++------
> drivers/i2c/busses/i2c-tegra-bpmp.c | 27 +++++++++---
> drivers/i2c/i2c-core-base.c | 17 ++++----
> drivers/i2c/i2c-core-smbus.c | 25 ++++++++---
> drivers/i2c/i2c-core.h | 15 +++++++
> drivers/i2c/muxes/i2c-demux-pinctrl.c | 3 ++
> include/linux/i2c.h | 38 +++++++++++------
> 8 files changed, 162 insertions(+), 47 deletions(-)
>

\
 
 \ /
  Last update: 2019-03-04 19:12    [W:0.070 / U:0.200 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site