lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 1/4] can: m_can: Create a m_can platform framework
From
Date
Wolfgang

On 3/4/19 10:56 AM, Wolfgang Grandegger wrote:
> Hello Dan,
>
> the series already looks quite good. I still realized a few (minor)
> issues while browsing the patch/code...
>

Thanks for the review. It is getting there.

> Am 01.03.19 um 19:50 schrieb Dan Murphy:
>> Create a m_can platform framework that peripherial
>> devices can register to and use common code and register sets.
>> The peripherial devices may provide read/write and configuration
>> support of the IP.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>
>> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
>> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
>> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
>> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
>> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/
>>
>> drivers/net/can/m_can/Kconfig | 13 +-
>> drivers/net/can/m_can/Makefile | 1 +
>> drivers/net/can/m_can/m_can.c | 702 +++++++++++++------------
>> drivers/net/can/m_can/m_can.h | 110 ++++
>> drivers/net/can/m_can/m_can_platform.c | 198 +++++++
>> 5 files changed, 681 insertions(+), 343 deletions(-)
>> create mode 100644 drivers/net/can/m_can/m_can.h
>> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>
>> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
>> index 04f20dd39007..f7119fd72df4 100644
>> --- a/drivers/net/can/m_can/Kconfig
>> +++ b/drivers/net/can/m_can/Kconfig
>> @@ -1,5 +1,14 @@
>> config CAN_M_CAN
>> + tristate "Bosch M_CAN support"
>> + ---help---
>> + Say Y here if you want support for Bosch M_CAN controller framework.
>> + This is common support for devices that embed the Bosch M_CAN IP.
>> +
>> +config CAN_M_CAN_PLATFORM
>> + tristate "Bosch M_CAN support for io-mapped devices"
>> depends on HAS_IOMEM
>> - tristate "Bosch M_CAN devices"
>> + depends on CAN_M_CAN
>> ---help---
>> - Say Y here if you want to support for Bosch M_CAN controller.
>> + Say Y here if you want support for IO Mapped Bosch M_CAN controller.
>> + This support is for devices that have the Bosch M_CAN controller
>> + IP embedded into the device and the IP is IO Mapped to the processor.
>> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
>> index 8bbd7f24f5be..057bbcdb3c74 100644
>> --- a/drivers/net/can/m_can/Makefile
>> +++ b/drivers/net/can/m_can/Makefile
>> @@ -3,3 +3,4 @@
>> #
>>
>> obj-$(CONFIG_CAN_M_CAN) += m_can.o
>> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
>> index 9b449400376b..b37d0886f9cb 100644
>> --- a/drivers/net/can/m_can/m_can.c
>> +++ b/drivers/net/can/m_can/m_can.c
>> @@ -1,20 +1,14 @@
>> -/*
>> - * CAN bus driver for Bosch M_CAN controller
>> - *
>> - * Copyright (C) 2014 Freescale Semiconductor, Inc.
>> - * Dong Aisheng <b29396@freescale.com>
>> - *
>> - * Bosch M_CAN user manual can be obtained from:
>> +// SPDX-License-Identifier: GPL-2.0
>> +// CAN bus driver for Bosch M_CAN controller
>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
>> +// Dong Aisheng <b29396@freescale.com>
>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +/* Bosch M_CAN user manual can be obtained from:
>> * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/
>> * mcan_users_manual_v302.pdf
>> - *
>> - * This file is licensed under the terms of the GNU General Public
>> - * License version 2. This program is licensed "as is" without any
>> - * warranty of any kind, whether express or implied.
>> */
>>
>> -#include <linux/clk.h>
>> -#include <linux/delay.h>
>> #include <linux/interrupt.h>
>> #include <linux/io.h>
>> #include <linux/kernel.h>
>> @@ -28,11 +22,7 @@
>> #include <linux/can/dev.h>
>> #include <linux/pinctrl/consumer.h>
>>
>> -/* napi related */
>> -#define M_CAN_NAPI_WEIGHT 64
>> -
>> -/* message ram configuration data length */
>> -#define MRAM_CFG_LEN 8
>> +#include "m_can.h"
>>
>> /* registers definition */
>> enum m_can_reg {
>> @@ -86,28 +76,11 @@ enum m_can_reg {
>> M_CAN_TXEFA = 0xf8,
>> };
>>
>> -/* m_can lec values */
>> -enum m_can_lec_type {
>> - LEC_NO_ERROR = 0,
>> - LEC_STUFF_ERROR,
>> - LEC_FORM_ERROR,
>> - LEC_ACK_ERROR,
>> - LEC_BIT1_ERROR,
>> - LEC_BIT0_ERROR,
>> - LEC_CRC_ERROR,
>> - LEC_UNUSED,
>> -};
>> +/* napi related */
>> +#define M_CAN_NAPI_WEIGHT 64
>>
>> -enum m_can_mram_cfg {
>> - MRAM_SIDF = 0,
>> - MRAM_XIDF,
>> - MRAM_RXF0,
>> - MRAM_RXF1,
>> - MRAM_RXB,
>> - MRAM_TXE,
>> - MRAM_TXB,
>> - MRAM_CFG_NUM,
>> -};
>> +/* message ram configuration data length */
>> +#define MRAM_CFG_LEN 8
>>
>> /* Core Release Register (CREL) */
>> #define CREL_REL_SHIFT 28
>> @@ -343,77 +316,83 @@ enum m_can_mram_cfg {
>> #define TX_BUF_MM_MASK (0xff << TX_BUF_MM_SHIFT)
>>
>> /* Tx event FIFO Element */
>> -/* E1 */
>
> I also don't understand what "E1" means... we should keep taht line anyway!
>

OK I can add it back I believe it means event FIFO 1. Thought is was unneeded

>> #define TX_EVENT_MM_SHIFT TX_BUF_MM_SHIFT
>> #define TX_EVENT_MM_MASK (0xff << TX_EVENT_MM_SHIFT)
>>
>> -/* address offset and element number for each FIFO/Buffer in the Message RAM */
>> -struct mram_cfg {
>> - u16 off;
>> - u8 num;
>> -};
>> -
>> -/* m_can private data structure */
>> -struct m_can_priv {
>> - struct can_priv can; /* must be the first member */
>> - struct napi_struct napi;
>> - struct net_device *dev;
>> - struct device *device;
>> - struct clk *hclk;
>> - struct clk *cclk;
>> - void __iomem *base;
>> - u32 irqstatus;
>> - int version;
>> -
>> - /* message ram configuration */
>> - void __iomem *mram_base;
>> - struct mram_cfg mcfg[MRAM_CFG_NUM];
>> -};
>> +static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)
>> +{
>> + if (priv->ops->read_reg)
>> + return priv->ops->read_reg(priv, reg);
>> + else
>> + return -EINVAL;
>> +}
>>
>> -static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
>> +static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)
>> {
>> - return readl(priv->base + reg);
>> + if (priv->ops->write_reg)
>> + return priv->ops->write_reg(priv, reg, val);
>> + else
>> + return -EINVAL;
>> }
>>
>> -static inline void m_can_write(const struct m_can_priv *priv,
>> - enum m_can_reg reg, u32 val)
>> +static u32 m_can_fifo_read(struct m_can_priv *priv,
>> + u32 fgi, unsigned int offset)
>> {
>> - writel(val, priv->base + reg);
>> + u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +
>> + offset;
>> +
>> + if (priv->ops->read_fifo)
>> + return priv->ops->read_fifo(priv, addr_offset);
>> + else
>> + return -EINVAL;
>> }
>>
>> -static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
>> - u32 fgi, unsigned int offset)
>> +static u32 m_can_fifo_write(struct m_can_priv *priv,
>> + u32 fpi, unsigned int offset, u32 val)
>> {
>> - return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
>> - fgi * RXF0_ELEMENT_SIZE + offset);
>> + u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +
>> + offset;
>> +
>> + if (priv->ops->write_fifo)
>> + return priv->ops->write_fifo(priv, addr_offset, val);
>> + else
>> + return -EINVAL;
>> }
>>
>> -static inline void m_can_fifo_write(const struct m_can_priv *priv,
>> - u32 fpi, unsigned int offset, u32 val)
>> +static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,
>> + u32 fpi, u32 val)
>> {
>> - writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
>> - fpi * TXB_ELEMENT_SIZE + offset);
>> + if (priv->ops->write_fifo)
>> + return priv->ops->write_fifo(priv, fpi, val);
>> + else
>> + return 0;
>> }
>>
>> -static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
>> - u32 fgi,
>> - u32 offset) {
>> - return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
>> - fgi * TXE_ELEMENT_SIZE + offset);
>> +static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)
>> +{
>> + u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +
>> + offset;
>> +
>> + if (priv->ops->read_fifo)
>> + return priv->ops->read_fifo(priv, addr_offset);
>> + else
>> + return -EINVAL;
>> }
>>
>> -static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
>> +static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)
>> {
>> return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
>> }
>>
>> -static inline void m_can_config_endisable(const struct m_can_priv *priv,
>> - bool enable)
>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable)
>> {
>> u32 cccr = m_can_read(priv, M_CAN_CCCR);
>> u32 timeout = 10;
>> u32 val = 0;
>>
>> + if (cccr & CCCR_CSR)
>> + cccr &= ~CCCR_CSR;
>> +
>
> Is that a bug fix? Or why do we need it?

I will take a look again at it to see if it is needed for both io mapped and perp devices.


>
>> if (enable) {
>> /* enable m_can configuration */
>> m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT);
>> @@ -430,7 +409,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
>>
>> while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
>> if (timeout == 0) {
>> - netdev_warn(priv->dev, "Failed to init module\n");
>> + netdev_warn(priv->net, "Failed to init module\n");
>> return;
>> }
>> timeout--;
>> @@ -438,13 +417,13 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
>> }
>> }
>>
>> -static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
>> +static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)
>> {
>> /* Only interrupt line 0 is used in this driver */
>> m_can_write(priv, M_CAN_ILE, ILE_EINT0);
>> }
>>
>> -static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
>> +static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)
>> {
>> m_can_write(priv, M_CAN_ILE, 0x0);
>> }
>> @@ -633,9 +612,12 @@ static int m_can_clk_start(struct m_can_priv *priv)
>> {
>> int err;
>>
>> - err = pm_runtime_get_sync(priv->device);
>> + if (priv->pm_clock_support == 0)
>> + return 0;
>> +
>> + err = pm_runtime_get_sync(priv->dev);
>> if (err < 0) {
>> - pm_runtime_put_noidle(priv->device);
>> + pm_runtime_put_noidle(priv->dev);
>> return err;
>> }
>>
>> @@ -644,7 +626,8 @@ static int m_can_clk_start(struct m_can_priv *priv)
>>
>> static void m_can_clk_stop(struct m_can_priv *priv)
>> {
>> - pm_runtime_put_sync(priv->device);
>> + if (priv->pm_clock_support)
>> + pm_runtime_put_sync(priv->dev);
>> }
>>
>> static int m_can_get_berr_counter(const struct net_device *dev,
>> @@ -811,9 +794,8 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
>> return work_done;
>> }
>>
>> -static int m_can_poll(struct napi_struct *napi, int quota)
>> +static int m_can_rx_handler(struct net_device *dev, int quota)
>> {
>> - struct net_device *dev = napi->dev;
>> struct m_can_priv *priv = netdev_priv(dev);
>> int work_done = 0;
>> u32 irqstatus, psr;
>> @@ -831,13 +813,33 @@ static int m_can_poll(struct napi_struct *napi, int quota)
>>
>> if (irqstatus & IR_RF0N)
>> work_done += m_can_do_rx_poll(dev, (quota - work_done));
>> +end:
>> + return work_done;
>> +}
>> +
>> +static int m_can_rx_peripherial(struct net_device *dev)
>> +{
>> + struct m_can_priv *priv = netdev_priv(dev);
>> +
>> + m_can_rx_handler(dev, 1);
>> +
>> + m_can_enable_all_interrupts(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static int m_can_poll(struct napi_struct *napi, int quota)
>> +{
>> + struct net_device *dev = napi->dev;
>> + struct m_can_priv *priv = netdev_priv(dev);
>> + int work_done;
>>
>> + work_done = m_can_rx_handler(dev, quota);
>> if (work_done < quota) {
>> napi_complete_done(napi, work_done);
>> m_can_enable_all_interrupts(priv);
>> }
>>
>> -end:
>> return work_done;
>> }
>>
>> @@ -894,6 +896,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
>> if (ir & IR_ALL_INT)
>> m_can_write(priv, M_CAN_IR, ir);
>>
>> + if (priv->ops->clr_dev_interrupts)
>> + priv->ops->clr_dev_interrupts(priv);
>> +
>> /* schedule NAPI in case of
>> * - rx IRQ
>> * - state change IRQ
>> @@ -902,7 +907,10 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
>> if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {
>> priv->irqstatus = ir;
>> m_can_disable_all_interrupts(priv);
>> - napi_schedule(&priv->napi);
>> + if (!priv->is_peripherial)
>> + napi_schedule(&priv->napi);
>> + else
>> + m_can_rx_peripherial(dev);
>> }
>>
>> if (priv->version == 30) {
>> @@ -1155,6 +1163,9 @@ static void m_can_chip_config(struct net_device *dev)
>> m_can_set_bittiming(dev);
>>
>> m_can_config_endisable(priv, false);
>> +
>> + if (priv->ops->device_init)
>> + priv->ops->device_init(priv);
>> }
>>
>> static void m_can_start(struct net_device *dev)
>> @@ -1188,20 +1199,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
>> * else it returns the release and step coded as:
>> * return value = 10 * <release> + 1 * <step>
>> */
>> -static int m_can_check_core_release(void __iomem *m_can_base)
>> +static int m_can_check_core_release(struct m_can_priv *priv)
>> {
>> u32 crel_reg;
>> u8 rel;
>> u8 step;
>> int res;
>> - struct m_can_priv temp_priv = {
>> - .base = m_can_base
>> - };
>>
>> /* Read Core Release Version and split into version number
>> * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
>> */
>> - crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
>> + crel_reg = m_can_read(priv, M_CAN_CREL);
>> rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
>> step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
>>
>> @@ -1219,18 +1227,26 @@ static int m_can_check_core_release(void __iomem *m_can_base)
>> /* Selectable Non ISO support only in version 3.2.x
>> * This function checks if the bit is writable.
>> */
>> -static bool m_can_niso_supported(const struct m_can_priv *priv)
>> +static bool m_can_niso_supported(struct m_can_priv *priv)
>> {
>> - u32 cccr_reg, cccr_poll;
>> - int niso_timeout;
>> + u32 cccr_reg, cccr_poll = 0;
>> + int niso_timeout = -ETIMEDOUT;
>> + int i;
>>
>> m_can_config_endisable(priv, true);
>> cccr_reg = m_can_read(priv, M_CAN_CCCR);
>> cccr_reg |= CCCR_NISO;
>> m_can_write(priv, M_CAN_CCCR, cccr_reg);
>>
>> - niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
>> - (cccr_poll == cccr_reg), 0, 10);
>> + for (i = 0; i <= 10; i++) {
>> + cccr_poll = m_can_read(priv, M_CAN_CCCR);
>> + if (cccr_poll == cccr_reg) {
>> + niso_timeout = 0;
>> + break;
>> + }
>> +
>> + usleep_range(1, 5);
>> + }
>>
>> /* Clear NISO */
>> cccr_reg &= ~(CCCR_NISO);
>> @@ -1242,107 +1258,95 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)
>> return !niso_timeout;
>> }
>>
>> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
>> - void __iomem *addr)
>> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)
>> {
>> - struct m_can_priv *priv;
>> + struct net_device *dev = m_can_dev->net;
>> int m_can_version;
>>
>> - m_can_version = m_can_check_core_release(addr);
>> + m_can_version = m_can_check_core_release(m_can_dev);
>> /* return if unsupported version */
>> if (!m_can_version) {
>> - dev_err(&pdev->dev, "Unsupported version number: %2d",
>> + dev_err(m_can_dev->dev, "Unsupported version number: %2d",
>> m_can_version);
>> return -EINVAL;
>> }
>>
>> - priv = netdev_priv(dev);
>> - netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
>> + if (!m_can_dev->is_peripherial)
>> + netif_napi_add(dev, &m_can_dev->napi,
>> + m_can_poll, M_CAN_NAPI_WEIGHT);
>>
>> /* Shared properties of all M_CAN versions */
>> - priv->version = m_can_version;
>> - priv->dev = dev;
>> - priv->base = addr;
>> - priv->can.do_set_mode = m_can_set_mode;
>> - priv->can.do_get_berr_counter = m_can_get_berr_counter;
>> + m_can_dev->version = m_can_version;
>> + m_can_dev->can.do_set_mode = m_can_set_mode;
>> + m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;
>>
>> /* Set M_CAN supported operations */
>> - priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
>> + m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
>> CAN_CTRLMODE_LISTENONLY |
>> CAN_CTRLMODE_BERR_REPORTING |
>> CAN_CTRLMODE_FD;
>>
>> /* Set properties depending on M_CAN version */
>> - switch (priv->version) {
>> + switch (m_can_dev->version) {
>> case 30:
>> /* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
>> can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
>> - priv->can.bittiming_const = &m_can_bittiming_const_30X;
>> - priv->can.data_bittiming_const =
>> + if (m_can_dev->bit_timing)
>> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
>> + else
>> + m_can_dev->can.bittiming_const =
>> + &m_can_bittiming_const_30X;
>
> m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
> m_can_dev->bit_timing : &m_can_bittiming_const_30X;
>
> Is more compact. Here and below.

Ack

>
>> + if (m_can_dev->data_timing)
>> + m_can_dev->can.data_bittiming_const =
>> + m_can_dev->data_timing;
>> + else
>> + m_can_dev->can.data_bittiming_const =
>> &m_can_data_bittiming_const_30X;
>> break;
>> case 31:
>> /* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
>> can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
>> - priv->can.bittiming_const = &m_can_bittiming_const_31X;
>> - priv->can.data_bittiming_const =
>> + if (m_can_dev->bit_timing)
>> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
>> + else
>> + m_can_dev->can.bittiming_const =
>> + &m_can_bittiming_const_31X;
>> + if (m_can_dev->data_timing)
>> + m_can_dev->can.data_bittiming_const =
>> + m_can_dev->data_timing;
>> + else
>> + m_can_dev->can.data_bittiming_const =
>> &m_can_data_bittiming_const_31X;
>> break;
>> case 32:
>> - priv->can.bittiming_const = &m_can_bittiming_const_31X;
>> - priv->can.data_bittiming_const =
>> + if (m_can_dev->bit_timing)
>> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
>> + else
>> + m_can_dev->can.bittiming_const =
>> + &m_can_bittiming_const_31X;
>> +
>> + if (m_can_dev->data_timing)
>> + m_can_dev->can.data_bittiming_const =
>> + m_can_dev->data_timing;
>> + else
>> + m_can_dev->can.data_bittiming_const =
>> &m_can_data_bittiming_const_31X;
>> - priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
>> +
>> + m_can_dev->can.ctrlmode_supported |=
>> + (m_can_niso_supported(m_can_dev)
>> ? CAN_CTRLMODE_FD_NON_ISO
>> : 0);
>> break;
>> default:
>> - dev_err(&pdev->dev, "Unsupported version number: %2d",
>> - priv->version);
>> + dev_err(m_can_dev->dev, "Unsupported version number: %2d",
>> + m_can_dev->version);
>> return -EINVAL;
>> }
>>
>> - return 0;
>> -}
>> -
>> -static int m_can_open(struct net_device *dev)
>> -{
>> - struct m_can_priv *priv = netdev_priv(dev);
>> - int err;
>> -
>> - err = m_can_clk_start(priv);
>> - if (err)
>> - return err;
>> -
>> - /* open the can device */
>> - err = open_candev(dev);
>> - if (err) {
>> - netdev_err(dev, "failed to open can device\n");
>> - goto exit_disable_clks;
>> - }
>> -
>> - /* register interrupt handler */
>> - err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
>> - dev);
>> - if (err < 0) {
>> - netdev_err(dev, "failed to request interrupt\n");
>> - goto exit_irq_fail;
>> - }
>> -
>> - /* start the m_can controller */
>> - m_can_start(dev);
>> -
>> - can_led_event(dev, CAN_LED_EVENT_OPEN);
>> - napi_enable(&priv->napi);
>> - netif_start_queue(dev);
>> + if (m_can_dev->ops->device_init)
>> + m_can_dev->ops->device_init(m_can_dev);
>>
>> return 0;
>> -
>> -exit_irq_fail:
>> - close_candev(dev);
>> -exit_disable_clks:
>> - m_can_clk_stop(priv);
>> - return err;
>> }
>>
>> static void m_can_stop(struct net_device *dev)
>> @@ -1361,10 +1365,17 @@ static int m_can_close(struct net_device *dev)
>> struct m_can_priv *priv = netdev_priv(dev);
>>
>> netif_stop_queue(dev);
>> - napi_disable(&priv->napi);
>> + if (!priv->is_peripherial)
>> + napi_disable(&priv->napi);
>> m_can_stop(dev);
>> m_can_clk_stop(priv);
>> free_irq(dev->irq, dev);
>> +
>> + if (priv->is_peripherial) {
>> + destroy_workqueue(priv->wq);
>> + priv->wq = NULL;
>
> Could you pease use the name "priv->tx_wq".
>

ACK

>> + }
>> +
>> close_candev(dev);
>> can_led_event(dev, CAN_LED_EVENT_STOP);
>>
>> @@ -1385,18 +1396,15 @@ static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
>> return !!priv->can.echo_skb[next_idx];
>> }
>>
>> -static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> - struct net_device *dev)
>> +static void m_can_tx_handler(struct m_can_priv *priv)
>> {
>> - struct m_can_priv *priv = netdev_priv(dev);
>> - struct canfd_frame *cf = (struct canfd_frame *)skb->data;
>> + struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;
>> + struct net_device *dev = priv->net;
>> + struct sk_buff *skb = priv->tx_skb;
>> u32 id, cccr, fdflags;
>> int i;
>> int putidx;
>>
>> - if (can_dropped_invalid_skb(dev, skb))
>> - return NETDEV_TX_OK;
>> -
>> /* Generate ID field for TX buffer Element */
>> /* Common to all supported M_CAN versions */
>> if (cf->can_id & CAN_EFF_FLAG) {
>> @@ -1451,7 +1459,7 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> netif_stop_queue(dev);
>> netdev_warn(dev,
>> "TX queue active although FIFO is full.");
>> - return NETDEV_TX_BUSY;
>> + return;
>
> m_can_start_xmit() doesn't return NETDEV_TX_BUSY but NETDEV_TX_OK and
> the queue is stopped! Also the skb is not freed! The code states
> "/* This shouldn't happen */" but then it just prints a warning. Did
> you see that message?
>

No I have not seen this warning but I will re-check to be sure.

>> }
>>
>> /* get put index for frame */
>> @@ -1492,14 +1500,100 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> m_can_write(priv, M_CAN_TXBAR, (1 << putidx));
>>
>> /* stop network queue if fifo full */
>> - if (m_can_tx_fifo_full(priv) ||
>> - m_can_next_echo_skb_occupied(dev, putidx))
>> - netif_stop_queue(dev);
>> + if (m_can_tx_fifo_full(priv) ||
>> + m_can_next_echo_skb_occupied(dev, putidx))
>> + netif_stop_queue(dev);
>> + }
>> +}
>> +
>> +static void m_can_tx_work_queue(struct work_struct *ws)
>> +{
>> + struct m_can_priv *priv = container_of(ws, struct m_can_priv,
>> + tx_work);
>> + m_can_tx_handler(priv);
>> +}
>> +
>> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> + struct net_device *dev)
>> +{
>> + struct m_can_priv *priv = netdev_priv(dev);
>> +
>> + if (can_dropped_invalid_skb(dev, skb))
>> + return NETDEV_TX_OK;
>> +
>> + priv->tx_skb = skb;
>> + if (priv->is_peripherial) {
>> + netif_stop_queue(priv->net);
>> + queue_work(priv->wq, &priv->tx_work);
>> + } else {
>> + m_can_tx_handler(priv);
>> }
>>
>> return NETDEV_TX_OK;
>> }
>>
>> +static int m_can_open(struct net_device *dev)
>> +{
>> + struct m_can_priv *priv = netdev_priv(dev);
>> + int err;
>> +
>> + err = m_can_clk_start(priv);
>> + if (err)
>> + return err;
>> +
>> + /* open the can device */
>> + err = open_candev(dev);
>> + if (err) {
>> + netdev_err(dev, "failed to open can device\n");
>> + goto exit_disable_clks;
>> + }
>> +
>> + /* register interrupt handler */
>> + if (priv->is_peripherial) {
>> + priv->wq = alloc_workqueue("mcan_wq",
>> + WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);
>> + if (!priv->wq) {
>> + err = -ENOMEM;
>> + goto out_wq_fail;
>> + }
>> +
>> + INIT_WORK(&priv->tx_work, m_can_tx_work_queue);
>> +
>> + err = request_threaded_irq(dev->irq, NULL, m_can_isr,
>> + IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
>> + dev->name, dev);
>> + } else {
>> + err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
>> + dev);
>> + }
>> +
>> + if (err < 0) {
>> + netdev_err(dev, "failed to request interrupt\n");
>> + goto exit_irq_fail;
>> + }
>> +
>> + /* start the m_can controller */
>> + m_can_start(dev);
>> +
>> + can_led_event(dev, CAN_LED_EVENT_OPEN);
>> +
>> + if (!priv->is_peripherial)
>> + napi_enable(&priv->napi);
>> +
>> + netif_start_queue(dev);
>> +
>> + return 0;
>> +
>> +exit_irq_fail:
>> + if (priv->is_peripherial)
>> + destroy_workqueue(priv->wq);
>> +out_wq_fail:
>> + close_candev(dev);
>> +exit_disable_clks:
>> + m_can_clk_stop(priv);
>> + return err;
>> +}
>> +
>> static const struct net_device_ops m_can_netdev_ops = {
>> .ndo_open = m_can_open,
>> .ndo_stop = m_can_close,
>> @@ -1515,20 +1609,6 @@ static int register_m_can_dev(struct net_device *dev)
>> return register_candev(dev);
>> }
>>
>> -static void m_can_init_ram(struct m_can_priv *priv)
>> -{
>> - int end, i, start;
>> -
>> - /* initialize the entire Message RAM in use to avoid possible
>> - * ECC/parity checksum errors when reading an uninitialized buffer
>> - */
>> - start = priv->mcfg[MRAM_SIDF].off;
>> - end = priv->mcfg[MRAM_TXB].off +
>> - priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
>> - for (i = start; i < end; i += 4)
>> - writel(0x0, priv->mram_base + i);
>> -}
>> -
>> static void m_can_of_parse_mram(struct m_can_priv *priv,
>> const u32 *mram_config_vals)
>> {
>> @@ -1556,9 +1636,8 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
>> priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
>> (TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
>>
>> - dev_dbg(priv->device,
>> - "mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
>> - priv->mram_base,
>> + dev_dbg(priv->dev,
>> + "sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
>> priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
>> priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,
>> priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,
>> @@ -1566,63 +1645,55 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
>> priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
>> priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
>> priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
>> -
>> - m_can_init_ram(priv);
>> }
>>
>> -static int m_can_plat_probe(struct platform_device *pdev)
>> +void m_can_init_ram(struct m_can_priv *priv)
>> {
>> - struct net_device *dev;
>> - struct m_can_priv *priv;
>> - struct resource *res;
>> - void __iomem *addr;
>> - void __iomem *mram_addr;
>> - struct clk *hclk, *cclk;
>> - int irq, ret;
>> - struct device_node *np;
>> - u32 mram_config_vals[MRAM_CFG_LEN];
>> - u32 tx_fifo_size;
>> -
>> - np = pdev->dev.of_node;
>> + int end, i, start;
>>
>> - hclk = devm_clk_get(&pdev->dev, "hclk");
>> - cclk = devm_clk_get(&pdev->dev, "cclk");
>> + /* initialize the entire Message RAM in use to avoid possible
>> + * ECC/parity checksum errors when reading an uninitialized buffer
>> + */
>> + start = priv->mcfg[MRAM_SIDF].off;
>> + end = priv->mcfg[MRAM_TXB].off +
>> + priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
>>
>> - if (IS_ERR(hclk) || IS_ERR(cclk)) {
>> - dev_err(&pdev->dev, "no clock found\n");
>> - ret = -ENODEV;
>> - goto failed_ret;
>> - }
>> + for (i = start; i < end; i += 4)
>> + m_can_fifo_write_no_off(priv, i, 0x0);
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_init_ram);
>>
>> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>> - addr = devm_ioremap_resource(&pdev->dev, res);
>> - irq = platform_get_irq_byname(pdev, "int0");
>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev)
>> +{
>> + int ret = 0;
>>
>> - if (IS_ERR(addr) || irq < 0) {
>> - ret = -EINVAL;
>> - goto failed_ret;
>> - }
>> + m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");
>> + m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");
>>
>> - /* message ram could be shared */
>> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>> - if (!res) {
>> + if (IS_ERR(m_can_dev->cclk)) {
>> + dev_err(m_can_dev->dev, "no clock found\n");
>> ret = -ENODEV;
>> - goto failed_ret;
>> }
>>
>> - mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> - if (!mram_addr) {
>> - ret = -ENOMEM;
>> - goto failed_ret;
>> - }
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_class_get_clocks);
>>
>> - /* get message ram configuration */
>> - ret = of_property_read_u32_array(np, "bosch,mram-cfg",
>> - mram_config_vals,
>> - sizeof(mram_config_vals) / 4);
>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev)
>> +{
>> + struct m_can_priv *class_dev = NULL;
>> + u32 mram_config_vals[MRAM_CFG_LEN];
>> + struct net_device *net_dev;
>> + u32 tx_fifo_size;
>> + int ret;
>> +
>> + ret = fwnode_property_read_u32_array(dev_fwnode(dev),
>> + "bosch,mram-cfg",
>> + mram_config_vals,
>> + sizeof(mram_config_vals) / 4);
>> if (ret) {
>> - dev_err(&pdev->dev, "Could not get Message RAM configuration.");
>> - goto failed_ret;
>> + dev_err(dev, "Could not get Message RAM configuration.");
>> + goto out;
>> }
>>
>> /* Get TX FIFO size
>> @@ -1631,66 +1702,74 @@ static int m_can_plat_probe(struct platform_device *pdev)
>> tx_fifo_size = mram_config_vals[7];
>>
>> /* allocate the m_can device */
>> - dev = alloc_candev(sizeof(*priv), tx_fifo_size);
>> - if (!dev) {
>> - ret = -ENOMEM;
>> - goto failed_ret;
>> + net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
>> + if (!net_dev) {
>> + dev_err(dev, "Failed to allocate CAN device");
>> + goto out;
>> }
>>
>> - priv = netdev_priv(dev);
>> - dev->irq = irq;
>> - priv->device = &pdev->dev;
>> - priv->hclk = hclk;
>> - priv->cclk = cclk;
>> - priv->can.clock.freq = clk_get_rate(cclk);
>> - priv->mram_base = mram_addr;
>> + class_dev = netdev_priv(net_dev);
>> + if (!class_dev) {
>> + dev_err(dev, "Failed to init netdev private");
>> + goto out;
>> + }
>>
>> - platform_set_drvdata(pdev, dev);
>> - SET_NETDEV_DEV(dev, &pdev->dev);
>> + class_dev->net = net_dev;
>> + class_dev->dev = dev;
>> + SET_NETDEV_DEV(net_dev, dev);
>>
>> - /* Enable clocks. Necessary to read Core Release in order to determine
>> - * M_CAN version
>> - */
>> - pm_runtime_enable(&pdev->dev);
>> - ret = m_can_clk_start(priv);
>> - if (ret)
>> - goto pm_runtime_fail;
>> + m_can_of_parse_mram(class_dev, mram_config_vals);
>> +out:
>> + return class_dev;
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);
>> +
>> +int m_can_class_register(struct m_can_priv *m_can_dev)
>> +{
>> + int ret;
>>
>> - ret = m_can_dev_setup(pdev, dev, addr);
>> + if (m_can_dev->pm_clock_support) {
>> + pm_runtime_enable(m_can_dev->dev);
>> + ret = m_can_clk_start(m_can_dev);
>> + if (ret)
>> + goto pm_runtime_fail;
>> + }
>> +
>> + ret = m_can_dev_setup(m_can_dev);
>> if (ret)
>> goto clk_disable;
>>
>> - ret = register_m_can_dev(dev);
>> + ret = register_m_can_dev(m_can_dev->net);
>> if (ret) {
>> - dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
>> - KBUILD_MODNAME, ret);
>> + dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",
>> + m_can_dev->net->name, ret);
>> goto clk_disable;
>> }
>>
>> - m_can_of_parse_mram(priv, mram_config_vals);
>> -
>> - devm_can_led_init(dev);
>> + devm_can_led_init(m_can_dev->net);
>>
>> - of_can_transceiver(dev);
>> + of_can_transceiver(m_can_dev->net);
>>
>> - dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
>> - KBUILD_MODNAME, dev->irq, priv->version);
>> + dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",
>> + KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);
>>
>> /* Probe finished
>> * Stop clocks. They will be reactivated once the M_CAN device is opened
>> */
>> clk_disable:
>> - m_can_clk_stop(priv);
>> + m_can_clk_stop(m_can_dev);
>> pm_runtime_fail:
>> if (ret) {
>> - pm_runtime_disable(&pdev->dev);
>> - free_candev(dev);
>> + if (m_can_dev->pm_clock_support)
>> + pm_runtime_disable(m_can_dev->dev);
>> + free_candev(m_can_dev->net);
>> }
>> -failed_ret:
>> +
>> return ret;
>> }
>> +EXPORT_SYMBOL_GPL(m_can_class_register);
>>
>> -static __maybe_unused int m_can_suspend(struct device *dev)
>> +int m_can_class_suspend(struct device *dev)
>> {
>> struct net_device *ndev = dev_get_drvdata(dev);
>> struct m_can_priv *priv = netdev_priv(ndev);
>> @@ -1708,8 +1787,9 @@ static __maybe_unused int m_can_suspend(struct device *dev)
>>
>> return 0;
>> }
>> +EXPORT_SYMBOL_GPL(m_can_class_suspend);
>>
>> -static __maybe_unused int m_can_resume(struct device *dev)
>> +int m_can_class_resume(struct device *dev)
>> {
>> struct net_device *ndev = dev_get_drvdata(dev);
>> struct m_can_priv *priv = netdev_priv(ndev);
>> @@ -1733,79 +1813,19 @@ static __maybe_unused int m_can_resume(struct device *dev)
>>
>> return 0;
>> }
>> +EXPORT_SYMBOL_GPL(m_can_class_resume);
>>
>> -static void unregister_m_can_dev(struct net_device *dev)
>> +void m_can_class_unregister(struct m_can_priv *m_can_dev)
>> {
>> - unregister_candev(dev);
>> -}
>> + unregister_candev(m_can_dev->net);
>>
>> -static int m_can_plat_remove(struct platform_device *pdev)
>> -{
>> - struct net_device *dev = platform_get_drvdata(pdev);
>> + m_can_clk_stop(m_can_dev);
>>
>> - unregister_m_can_dev(dev);
>> -
>> - pm_runtime_disable(&pdev->dev);
>> -
>> - platform_set_drvdata(pdev, NULL);
>> -
>> - free_candev(dev);
>> -
>> - return 0;
>> -}
>> -
>> -static int __maybe_unused m_can_runtime_suspend(struct device *dev)
>> -{
>> - struct net_device *ndev = dev_get_drvdata(dev);
>> - struct m_can_priv *priv = netdev_priv(ndev);
>> -
>> - clk_disable_unprepare(priv->cclk);
>> - clk_disable_unprepare(priv->hclk);
>> -
>> - return 0;
>> -}
>> -
>> -static int __maybe_unused m_can_runtime_resume(struct device *dev)
>> -{
>> - struct net_device *ndev = dev_get_drvdata(dev);
>> - struct m_can_priv *priv = netdev_priv(ndev);
>> - int err;
>> -
>> - err = clk_prepare_enable(priv->hclk);
>> - if (err)
>> - return err;
>> -
>> - err = clk_prepare_enable(priv->cclk);
>> - if (err)
>> - clk_disable_unprepare(priv->hclk);
>> -
>> - return err;
>> + free_candev(m_can_dev->net);
>> }
>> -
>> -static const struct dev_pm_ops m_can_pmops = {
>> - SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
>> - m_can_runtime_resume, NULL)
>> - SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>> -};
>> -
>> -static const struct of_device_id m_can_of_table[] = {
>> - { .compatible = "bosch,m_can", .data = NULL },
>> - { /* sentinel */ },
>> -};
>> -MODULE_DEVICE_TABLE(of, m_can_of_table);
>> -
>> -static struct platform_driver m_can_plat_driver = {
>> - .driver = {
>> - .name = KBUILD_MODNAME,
>> - .of_match_table = m_can_of_table,
>> - .pm = &m_can_pmops,
>> - },
>> - .probe = m_can_plat_probe,
>> - .remove = m_can_plat_remove,
>> -};
>> -
>> -module_platform_driver(m_can_plat_driver);
>> +EXPORT_SYMBOL_GPL(m_can_class_unregister);
>>
>> MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
>> MODULE_LICENSE("GPL v2");
>> MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
>> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
>> new file mode 100644
>> index 000000000000..70ab7bba063d
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can.h
>> @@ -0,0 +1,110 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* CAN bus driver for Bosch M_CAN controller
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#ifndef _CAN_M_CAN_H_
>> +#define _CAN_M_CAN_H_
>> +
>> +#include <linux/can/core.h>
>> +#include <linux/can/led.h>
>> +#include <linux/completion.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/freezer.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/can/dev.h>
>> +#include <linux/pinctrl/consumer.h>
>> +
>> +/* m_can lec values */
>> +enum m_can_lec_type {
>> + LEC_NO_ERROR = 0,
>> + LEC_STUFF_ERROR,
>> + LEC_FORM_ERROR,
>> + LEC_ACK_ERROR,
>> + LEC_BIT1_ERROR,
>> + LEC_BIT0_ERROR,
>> + LEC_CRC_ERROR,
>> + LEC_UNUSED,
>> +};
>> +
>> +enum m_can_mram_cfg {
>> + MRAM_SIDF = 0,
>> + MRAM_XIDF,
>> + MRAM_RXF0,
>> + MRAM_RXF1,
>> + MRAM_RXB,
>> + MRAM_TXE,
>> + MRAM_TXB,
>> + MRAM_CFG_NUM,
>> +};
>> +
>> +/* address offset and element number for each FIFO/Buffer in the Message RAM */
>> +struct mram_cfg {
>> + u16 off;
>> + u8 num;
>> +};
>> +
>> +struct m_can_priv;
>> +struct m_can_ops {
>> + /* Device specific call backs */
>> + int (*clr_dev_interrupts)(struct m_can_priv *m_can_class);
>
> Why not just "clear_interrupt"... to be consistant with the names below.

I wanted to be clear in the M_CAN code that these are device interrupts and not M_CAN interrupts.

I can change it to clear_interrupt if you think it makes more sense.

>
>> + u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);
>> + int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);
>> + u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);
>> + int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,
>> + int val);
>> + int (*device_init)(struct m_can_priv *m_can_class);
>> +};
>> +
>> +struct m_can_priv {
>> + struct can_priv can;
>> + struct napi_struct napi;
>> + struct net_device *net;
>> + struct device *dev;
>> + struct clk *hclk;
>> + struct clk *cclk;
>> +
>> + struct workqueue_struct *wq;
>
> s/wq/tx_wq/ as already suggested above.
>

Ack

>> + struct work_struct tx_work;
>> + struct sk_buff *tx_skb;
>> +
>> + struct can_bittiming_const *bit_timing;
>> + struct can_bittiming_const *data_timing;
>> +
>> + struct m_can_ops *ops;
>> +
>> + void *device_data;
>> +
>> + int version;
>> + int freq;
>> + u32 irqstatus;
>> +
>> + int pm_clock_support;
>
> A "bool" would be more appropriate, I think.


I was abiding by this checkpatch warning I got on the is_peripherial.

CHECK: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#94: FILE: drivers/net/can/m_can/m_can.h:94:
+ bool is_peripherial;


Dan

<snip>

>
>> + int is_peripherial;
>> +
>> + struct mram_cfg mcfg[MRAM_CFG_NUM];
>> +};
>> +
>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
>> +int m_can_class_register(struct m_can_priv *m_can_dev);
>> +void m_can_class_unregister(struct m_can_priv *m_can_dev);
>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
>> +void m_can_init_ram(struct m_can_priv *priv);
>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);
>> +
>> +int m_can_class_suspend(struct device *dev);
>> +int m_can_class_resume(struct device *dev);
>> +#endif /* _CAN_M_H_ */
>> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
>> new file mode 100644
>> index 000000000000..92d989ce032a
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can_platform.c
>> @@ -0,0 +1,198 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// IOMapped CAN bus driver for Bosch M_CAN controller
>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
>> +// Dong Aisheng <b29396@freescale.com>
>> +//
>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/platform_device.h>
>> +
>> +#include "m_can.h"
>> +
>> +struct m_can_plat_priv {
>> + void __iomem *base;
>> + void __iomem *mram_base;
>> +};
>> +
>> +static u32 iomap_read_reg(struct m_can_priv *m_can_class, int reg)
>> +{
>> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> + return readl(priv->base + reg);
>> +}
>> +
>> +static u32 iomap_read_fifo(struct m_can_priv *m_can_class, int offset)
>> +{
>> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> + return readl(priv->mram_base + offset);
>> +}
>> +
>> +static int iomap_write_reg(struct m_can_priv *m_can_class, int reg, int val)
>> +{
>> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> + writel(val, priv->base + reg);
>> +
>> + return 0;
>> +}
>> +
>> +static int iomap_write_fifo(struct m_can_priv *m_can_class, int offset, int val)
>> +{
>> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> + writel(val, priv->mram_base + offset);
>> +
>> + return 0;
>> +}
>> +
>> +static struct m_can_ops m_can_plat_ops = {
>> + .read_reg = iomap_read_reg,
>> + .write_reg = iomap_write_reg,
>> + .write_fifo = iomap_write_fifo,
>> + .read_fifo = iomap_read_fifo,
>> +};
>> +
>> +static int m_can_plat_probe(struct platform_device *pdev)
>> +{
>> + struct m_can_priv *mcan_class;
>> + struct m_can_plat_priv *priv;
>> + struct resource *res;
>> + void __iomem *addr;
>> + void __iomem *mram_addr;
>> + int irq, ret = 0;
>> +
>> + mcan_class = m_can_class_allocate_dev(&pdev->dev);
>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + mcan_class->device_data = priv;
>> +
>> + m_can_class_get_clocks(mcan_class);
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>> + addr = devm_ioremap_resource(&pdev->dev, res);
>> + irq = platform_get_irq_byname(pdev, "int0");
>> + if (IS_ERR(addr) || irq < 0) {
>> + ret = -EINVAL;
>> + goto failed_ret;
>> + }
>> +
>> + /* message ram could be shared */
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>> + if (!res) {
>> + ret = -ENODEV;
>> + goto failed_ret;
>> + }
>> +
>> + mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> + if (!mram_addr) {
>> + ret = -ENOMEM;
>> + goto failed_ret;
>> + }
>> +
>> + priv->base = addr;
>> + priv->mram_base = mram_addr;
>> +
>> + mcan_class->net->irq = irq;
>> + mcan_class->pm_clock_support = 1;
>> + mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
>> + mcan_class->dev = &pdev->dev;
>> +
>> + mcan_class->ops = &m_can_plat_ops;
>> +
>> + mcan_class->is_peripherial = false;
>> +
>> + platform_set_drvdata(pdev, mcan_class->dev);
>> +
>> + m_can_init_ram(mcan_class);
>> +
>> + ret = m_can_class_register(mcan_class);
>> +
>> +failed_ret:
>> + return ret;
>> +}
>> +
>> +static __maybe_unused int m_can_suspend(struct device *dev)
>> +{
>> + return m_can_class_suspend(dev);
>> +}
>> +
>> +static __maybe_unused int m_can_resume(struct device *dev)
>> +{
>> + return m_can_class_resume(dev);
>> +}
>> +
>> +static int m_can_plat_remove(struct platform_device *pdev)
>> +{
>> + struct net_device *dev = platform_get_drvdata(pdev);
>> + struct m_can_priv *mcan_class = netdev_priv(dev);
>> +
>> + m_can_class_unregister(mcan_class);
>> +
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)
>> +{
>> + struct net_device *ndev = dev_get_drvdata(dev);
>> + struct m_can_priv *mcan_class = netdev_priv(ndev);
>> +
>> + m_can_class_suspend(dev);
>> +
>> + clk_disable_unprepare(mcan_class->cclk);
>> + clk_disable_unprepare(mcan_class->hclk);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_resume(struct device *dev)
>> +{
>> + struct net_device *ndev = dev_get_drvdata(dev);
>> + struct m_can_priv *mcan_class = netdev_priv(ndev);
>> + int err;
>> +
>> + err = clk_prepare_enable(mcan_class->hclk);
>> + if (err)
>> + return err;
>> +
>> + err = clk_prepare_enable(mcan_class->cclk);
>> + if (err)
>> + clk_disable_unprepare(mcan_class->hclk);
>> +
>> + m_can_class_resume(dev);
>> +
>> + return err;
>> +}
>> +
>> +static const struct dev_pm_ops m_can_pmops = {
>> + SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
>> + m_can_runtime_resume, NULL)
>> + SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>> +};
>> +
>> +static const struct of_device_id m_can_of_table[] = {
>> + { .compatible = "bosch,m_can", .data = NULL },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, m_can_of_table);
>> +
>> +static struct platform_driver m_can_plat_driver = {
>> + .driver = {
>> + .name = KBUILD_MODNAME,
>> + .of_match_table = m_can_of_table,
>> + .pm = &m_can_pmops,
>> + },
>> + .probe = m_can_plat_probe,
>> + .remove = m_can_plat_remove,
>> +};
>> +
>> +module_platform_driver(m_can_plat_driver);
>> +
>> +MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");
>>
>
> Wolfgang.
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-03-04 18:23    [W:0.165 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site