lkml.org 
[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/3] PCIe Host request to reserve IOVA
Hi Robin,

Thanks for your feedback. Please see my reply in line.

On Wed, Mar 27, 2019 at 8:32 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 25/01/2019 10:13, Srinath Mannam wrote:
> > Few SOCs have limitation that their PCIe host can't allow few inbound
> > address ranges. Allowed inbound address ranges are listed in dma-ranges
> > DT property and this address ranges are required to do IOVA mapping.
> > Remaining address ranges have to be reserved in IOVA mapping.
> >
> > PCIe Host driver of those SOCs has to list all address ranges which have
> > to reserve their IOVA address into PCIe host bridge resource entry list.
> > IOMMU framework will reserve these IOVAs while initializing IOMMU domain.
>
> FWIW I'm still only interested in solving this problem generically,
> because in principle it's not specific to PCI, for PCI it's certainly
> not specific to iproc, and either way it's not specific to DT. That
> said, I don't care strongly enough to keep pushing back on this
> implementation outright, since it's not something which couldn't be
> cleaned up 'properly' in future.
Iproc PCIe host controller supports inbound address translation
feature to restrict access
to allowed address ranges. so that allowed memory ranges need to
program to controller.
allowed address ranges information is passed to controller driver
through dma-ranges DT property.
This feature is specific to iproc PCIe controller, so that I think
this change has to specific to iproc
PCIe driver and DT.
Here I followed the same way how PCI IO regions are reserved
"iova_reserve_pci_windows". so that this
change also specific to PCI.
>
> One general comment I'd make, though, is that AFAIK PCI has a concept of
> inbound windows much more than it has a concept of gaps-between-windows,
> so if the PCI layer is going to track anything it should probably be the
> actual windows, and leave the DMA layer to invert them into the
> reservations it cares about as it consumes the list. That way you can
> also avoid the undocumented requirement for the firmware to keep the
> ranges property sorted in the first place.
This implementation has three parts.
1. parsing dma-ranges and extract allowed and reserved address ranges.
2. program allowed ranges to iproc PCIe controller.
3. reserve list of reserved address ranges in IOMMU layer.
#1 and #2 are done using "of_pci_dma_range_parser_init" in present
iproc PCIe driver.
so that, I listed reserve windows at the same place.
#3 requires list of reserve windows so that I add new
variable(dma_resv) to carry these
reserve windows list to iommu layer from iproc driver layer.
The reasons to not use DMA layer for parsing dma-ranges are,
1. This feature is not generic for all SOCs.
2. To avoid dam-ranges parsing in multiple places, already done in
iproc pcie driver.
3. Need to do modify standard DMA layer source code "of_dma_configure"
4. required a carrier to pass reserved windows list from DMA layer to
IOMMU layer.
5. I followed existing PCIe IO regions reserve procedure done in IOMMU layer.

Regards,
Srinath.
>
> Robin.
>
> >
> > This patch set is based on Linux-5.0-rc2.
> >
> > Changes from v2:
> > - Patch set rebased to Linux-5.0-rc2
> >
> > Changes from v1:
> > - Addressed Oza review comments.
> >
> > Srinath Mannam (3):
> > PCI: Add dma-resv window list
> > iommu/dma: Reserve IOVA for PCI host reserve address list
> > PCI: iproc: Add dma reserve resources to host
> >
> > drivers/iommu/dma-iommu.c | 8 ++++++
> > drivers/pci/controller/pcie-iproc.c | 51 ++++++++++++++++++++++++++++++++++++-
> > drivers/pci/probe.c | 3 +++
> > include/linux/pci.h | 1 +
> > 4 files changed, 62 insertions(+), 1 deletion(-)
> >

\
 
 \ /
  Last update: 2019-03-28 11:34    [W:0.828 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site