lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes
On Wed, Mar 27, 2019 at 11:33 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Hi Daniel,
>
> Am Mittwoch, den 27.03.2019, 10:51 +0200 schrieb Daniel Baluta:
> [...]
> >
> > > or
> > > "fsl,imx8qxp-edma", "fsl,imx8qm-edma"?
> >
> > One thing that it is not clear for me is why there are places
> > where we use two compatible strings?
> >
> > I understand the situation where are two distinct drivers, but is there
> > any other reason to add multiple compatible strings for a node in dts?
>
> We use 2 compatible string where there should not be any differences
> between the IP blocks of this SoC and a version the driver already
> supports.
>
> So if the eDMA driver already supports the software interface for
> "fsl,imx8qm-edma" and the IP block is compatible with this, we add this
> to the DT, so the we don't need any driver changes just to support a
> new SoC. But as you can never be sure if there are subtle differences
> in the IP block and/or SOC integration when adding the DT support, we
> also add a more specific compatible to the DT. If it turns out that
> there are software visible differences, we only need to adapt the
> driver to check for the more specific compatible to trigger the changed
> behavior, allowing to keep the DT stable.

Excellent explanation Lucas! For the moment upstream eDMA driver doesn't have
support for any i.MX8 so I think using "fsl,imx8qxp-edma" should be acceptable.

Thanks,
Daniel.

\
 
 \ /
  Last update: 2019-03-27 17:37    [W:0.042 / U:1.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site