lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer
Date
In function do_write_buffer(), in the for loop, there is a case
chip_ready() returns 1 while chip_good() returns 0, so it never
break the loop.
To fix this, chip_good() is enough and it should timeout if it stay
not good status for a while.

Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Yi Huaijie <yihuaijie@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp>
---
v3-v4:
1. add "mtd: " prefix to subject
2. add some comment suggested by reviewers

I forgot to resend this patch, I am very sorry.

drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 72428b6..bcabc50 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1876,7 +1876,11 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
continue;
}

- if (time_after(jiffies, timeo) && !chip_ready(map, adr))
+ /*
+ * We check "time_after" && "!chip_good" before checking
+ * "chip_good" to avoid the failure due to scheduling.
+ */
+ if (time_after(jiffies, timeo) && !chip_good(map, adr, datum))
break;

if (chip_good(map, adr, datum)) {
--
2.7.4
\
 
 \ /
  Last update: 2019-03-27 16:07    [W:0.024 / U:3.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site