lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v7 2/3] dt-bindings: phy: Add documentation for mixel dphy
Date
Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
.../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
new file mode 100644
index 000000000000..d3646580412a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
@@ -0,0 +1,29 @@
+Mixel DSI PHY for i.MX8
+
+The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+electrical signals for DSI.
+
+Required properties:
+- compatible: Must be:
+ - "mixel,imx8mq-mipi-dphy"
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+ - "phy_ref": phandle and specifier referring to the DPHY ref clock
+- reg: the register range of the PHY controller
+- #phy-cells: number of cells in PHY, as defined in
+ Documentation/devicetree/bindings/phy/phy-bindings.txt
+ this must be <0>
+
+Optional properties:
+- power-domains: phandle to power domain
+
+Example:
+ mipi_dphy: mipi_dphy@30A0030 {
+ compatible = "mixel,imx8mq-mipi-dphy";
+ clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ clock-names = "phy_ref";
+ reg = <0x30A00300 0x100>;
+ power-domains = <&pd_mipi0>;
+ #phy-cells = <0>;
+ };
--
2.20.1
\
 
 \ /
  Last update: 2019-03-27 09:21    [W:0.070 / U:9.656 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site