lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.0 087/262] net: dsa: mv88e6xxx: Default CMODE to 1000BaseX only on 6390X
Date
From: Marek Behún <marek.behun@nic.cz>

[ Upstream commit 65b034cf5c1766492aa107958149b440889480be ]

Commit 787799a9d555 sets the SERDES interfaces of 6390 and 6390X to
1000BaseX, but this is only needed on 6390X, since there are SERDES
interfaces which can be used on lower ports on 6390.

This commit fixes this by returning to previous behaviour on 6390.
(Previous behaviour means that CMODE is not set at all if requested mode
is NA).

This is needed on Turris MOX, where the 88e6190 is connected to CPU in
2500BaseX mode.

Fixes: 787799a9d555 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mv88e6xxx/port.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 5e921bb6c214..dce84a2a65c7 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -472,6 +472,8 @@ int mv88e6390_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode)
{
switch (mode) {
+ case PHY_INTERFACE_MODE_NA:
+ return 0;
case PHY_INTERFACE_MODE_XGMII:
case PHY_INTERFACE_MODE_XAUI:
case PHY_INTERFACE_MODE_RXAUI:
--
2.19.1
\
 
 \ /
  Last update: 2019-03-27 20:28    [W:0.649 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site