lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] drm/panel: otm8009a: set clock to 29.70 Mhz
Date
Dear Yannick,
Many thanks for your patch.

Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>

Philippe :-)


On 3/21/19 9:07 AM, Yannick Fertré wrote:
> The panel does not support clock frequency over 30.74 Mhz.
> The clock rate has been reduced to 29.70 Mhz & new timings have
> been computed to get a framerate of 50fps.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
> drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 87fa316..f715bbe 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -67,15 +67,15 @@ struct otm8009a {
> };
>
> static const struct drm_display_mode default_mode = {
> - .clock = 32729,
> + .clock = 29700,
> .hdisplay = 480,
> - .hsync_start = 480 + 120,
> - .hsync_end = 480 + 120 + 63,
> - .htotal = 480 + 120 + 63 + 120,
> + .hsync_start = 480 + 98,
> + .hsync_end = 480 + 98 + 32,
> + .htotal = 480 + 98 + 32 + 98,
> .vdisplay = 800,
> - .vsync_start = 800 + 12,
> - .vsync_end = 800 + 12 + 12,
> - .vtotal = 800 + 12 + 12 + 12,
> + .vsync_start = 800 + 15,
> + .vsync_end = 800 + 15 + 10,
> + .vtotal = 800 + 15 + 10 + 14,
> .vrefresh = 50,
> .flags = 0,
> .width_mm = 52,
>
\
 
 \ /
  Last update: 2019-03-26 13:51    [W:0.043 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site