lkml.org 
[lkml]   [2019]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/5] phy: ti: Add a new SERDES driver for TI's AM654x SoC
Date
Add a new SERDES driver for TI's AM654x SoC which configures
the SERDES only for PCIe. Support fo USB3 will be added later.

SERDES in am654x has three input clocks (left input, externel reference
clock and right input) and two output clocks (left output and right
output) in addition to a PLL mux clock which the SERDES uses for Clock
Multiplier Unit (CMU refclock).

The PLL mux clock can select from one of the three input clocks.
The right output can select between left input and external reference
clock while the left output can select between the right input and
external reference clock.

The driver has support to select PLL mux and left/right output mux as
specified in device tree.

[rogerq@ti.com: Fix boot lockup caused by accessing a structure member
(hw->init) allocated in stack of probe() and accessed in get_parent]
[rogerq@ti.com: Fix "Failed to find the parent" warnings]
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/ti/Kconfig | 12 +
drivers/phy/ti/Makefile | 1 +
drivers/phy/ti/phy-am654-serdes.c | 539 ++++++++++++++++++++++++++++++
3 files changed, 552 insertions(+)
create mode 100644 drivers/phy/ti/phy-am654-serdes.c

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 7cdc35f8c862..6931c87235b9 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -20,6 +20,18 @@ config PHY_DM816X_USB
help
Enable this for dm816x USB to work.

+config PHY_AM654_SERDES
+ tristate "TI AM654 SERDES support"
+ depends on OF && ARCH_K3 || COMPILE_TEST
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ select MULTIPLEXER
+ select REGMAP_MMIO
+ select MUX_MMIO
+ help
+ This option enables support for TI AM654 SerDes PHY used for
+ PCIe.
+
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
index 368de8e1548d..601bbd88f35e 100644
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
+obj-$(CONFIG_PHY_AM654_SERDES) += phy-am654-serdes.o
obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o
obj-$(CONFIG_PHY_TI_KEYSTONE_SERDES) += phy-keystone-serdes.o
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
new file mode 100644
index 000000000000..dfbd2d48503d
--- /dev/null
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * PCIe SERDES driver for AM654x SoC
+ *
+ * Copyright (C) 2018 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#define CMU_R07C 0x7c
+#define CMU_MASTER_CDN_O BIT(24)
+
+#define COMLANE_R138 0xb38
+#define CONFIG_VERSION_REG_MASK GENMASK(23, 16)
+#define CONFIG_VERSION_REG_SHIFT 16
+#define VERSION 0x70
+
+#define COMLANE_R190 0xb90
+#define L1_MASTER_CDN_O BIT(9)
+
+#define COMLANE_R194 0xb94
+#define CMU_OK_I_0 BIT(19)
+
+#define SERDES_CTRL 0x1fd0
+#define POR_EN BIT(29)
+
+#define WIZ_LANEXCTL_STS 0x1fe0
+#define TX0_ENABLE_OVL BIT(31)
+#define TX0_ENABLE_MASK GENMASK(30, 29)
+#define TX0_ENABLE_SHIFT 29
+#define TX0_DISABLE_STATE 0x0
+#define TX0_SLEEP_STATE 0x1
+#define TX0_SNOOZE_STATE 0x2
+#define TX0_ENABLE_STATE 0x3
+#define RX0_ENABLE_OVL BIT(15)
+#define RX0_ENABLE_MASK GENMASK(14, 13)
+#define RX0_ENABLE_SHIFT 13
+#define RX0_DISABLE_STATE 0x0
+#define RX0_SLEEP_STATE 0x1
+#define RX0_SNOOZE_STATE 0x2
+#define RX0_ENABLE_STATE 0x3
+
+#define WIZ_PLL_CTRL 0x1ff4
+#define PLL_ENABLE_OVL BIT(31)
+#define PLL_ENABLE_MASK GENMASK(30, 29)
+#define PLL_ENABLE_SHIFT 29
+#define PLL_DISABLE_STATE 0x0
+#define PLL_SLEEP_STATE 0x1
+#define PLL_SNOOZE_STATE 0x2
+#define PLL_ENABLE_STATE 0x3
+#define PLL_OK BIT(28)
+
+#define PLL_LOCK_TIME 100000 /* in microseconds */
+#define SLEEP_TIME 100 /* in microseconds */
+
+#define LANE_USB3 0x0
+#define LANE_PCIE0_LANE0 0x1
+
+#define LANE_PCIE1_LANE0 0x0
+#define LANE_PCIE0_LANE1 0x1
+
+#define SERDES_NUM_CLOCKS 3
+
+struct serdes_am654_clk_mux {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int reg;
+ int *table;
+ u32 mask;
+ u8 shift;
+ struct clk_init_data clk_data;
+};
+
+#define to_serdes_am654_clk_mux(_hw) \
+ container_of(_hw, struct serdes_am654_clk_mux, hw)
+
+static struct regmap_config serdes_am654_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+};
+
+struct serdes_am654 {
+ struct regmap *regmap;
+ struct device *dev;
+ struct mux_control *control;
+ bool busy;
+ u32 type;
+ struct device_node *of_node;
+ struct clk_onecell_data clk_data;
+ struct clk *clks[SERDES_NUM_CLOCKS];
+};
+
+static int serdes_am654_enable_pll(struct serdes_am654 *phy)
+{
+ u32 mask = PLL_ENABLE_OVL | PLL_ENABLE_MASK;
+ u32 val = PLL_ENABLE_OVL | (PLL_ENABLE_STATE << PLL_ENABLE_SHIFT);
+
+ regmap_update_bits(phy->regmap, WIZ_PLL_CTRL, mask, val);
+
+ return regmap_read_poll_timeout(phy->regmap, WIZ_PLL_CTRL, val,
+ val & PLL_OK, 1000, PLL_LOCK_TIME);
+}
+
+static void serdes_am654_disable_pll(struct serdes_am654 *phy)
+{
+ u32 mask = PLL_ENABLE_OVL | PLL_ENABLE_MASK;
+
+ regmap_update_bits(phy->regmap, WIZ_PLL_CTRL, mask, PLL_ENABLE_OVL);
+}
+
+static int serdes_am654_enable_txrx(struct serdes_am654 *phy)
+{
+ u32 mask;
+ u32 val;
+
+ /* Enable TX */
+ mask = TX0_ENABLE_OVL | TX0_ENABLE_MASK;
+ val = TX0_ENABLE_OVL | (TX0_ENABLE_STATE << TX0_ENABLE_SHIFT);
+ regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, val);
+
+ /* Enable RX */
+ mask = RX0_ENABLE_OVL | RX0_ENABLE_MASK;
+ val = RX0_ENABLE_OVL | (RX0_ENABLE_STATE << RX0_ENABLE_SHIFT);
+ regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, val);
+
+ return 0;
+}
+
+static int serdes_am654_disable_txrx(struct serdes_am654 *phy)
+{
+ u32 mask;
+
+ /* Disable TX */
+ mask = TX0_ENABLE_OVL | TX0_ENABLE_MASK;
+ regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, TX0_ENABLE_OVL);
+
+ /* Disable RX */
+ mask = RX0_ENABLE_OVL | RX0_ENABLE_MASK;
+ regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, RX0_ENABLE_OVL);
+
+ return 0;
+}
+
+static int serdes_am654_power_on(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+ struct device *dev = phy->dev;
+ int ret;
+ u32 val;
+
+ ret = serdes_am654_enable_pll(phy);
+ if (ret) {
+ dev_err(dev, "Failed to enable PLL\n");
+ return ret;
+ }
+
+ ret = serdes_am654_enable_txrx(phy);
+ if (ret) {
+ dev_err(dev, "Failed to enable TX RX\n");
+ return ret;
+ }
+
+ return regmap_read_poll_timeout(phy->regmap, COMLANE_R194, val,
+ val & CMU_OK_I_0, SLEEP_TIME,
+ PLL_LOCK_TIME);
+}
+
+static int serdes_am654_power_off(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+
+ serdes_am654_disable_txrx(phy);
+ serdes_am654_disable_pll(phy);
+
+ return 0;
+}
+
+static int serdes_am654_init(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+ u32 mask;
+ u32 val;
+
+ mask = CONFIG_VERSION_REG_MASK;
+ val = VERSION << CONFIG_VERSION_REG_SHIFT;
+ regmap_update_bits(phy->regmap, COMLANE_R138, mask, val);
+
+ val = CMU_MASTER_CDN_O;
+ regmap_update_bits(phy->regmap, CMU_R07C, val, val);
+
+ val = L1_MASTER_CDN_O;
+ regmap_update_bits(phy->regmap, COMLANE_R190, val, val);
+
+ return 0;
+}
+
+static int serdes_am654_reset(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+ u32 val;
+
+ val = POR_EN;
+ regmap_update_bits(phy->regmap, SERDES_CTRL, val, val);
+ mdelay(1);
+ regmap_update_bits(phy->regmap, SERDES_CTRL, val, 0);
+
+ return 0;
+}
+
+static void serdes_am654_release(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+
+ phy->type = PHY_NONE;
+ phy->busy = false;
+ mux_control_deselect(phy->control);
+}
+
+struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args
+ *args)
+{
+ struct serdes_am654 *am654_phy;
+ struct phy *phy;
+ int ret;
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ am654_phy = phy_get_drvdata(phy);
+ if (am654_phy->busy)
+ return ERR_PTR(-EBUSY);
+
+ ret = mux_control_select(am654_phy->control, args->args[1]);
+ if (ret) {
+ dev_err(dev, "Failed to select SERDES Lane Function\n");
+ return ERR_PTR(ret);
+ }
+
+ am654_phy->busy = true;
+ am654_phy->type = args->args[0];
+
+ return phy;
+}
+
+static const struct phy_ops ops = {
+ .reset = serdes_am654_reset,
+ .init = serdes_am654_init,
+ .power_on = serdes_am654_power_on,
+ .power_off = serdes_am654_power_off,
+ .release = serdes_am654_release,
+ .owner = THIS_MODULE,
+};
+
+static u8 serdes_am654_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+ unsigned int num_parents = clk_hw_get_num_parents(hw);
+ struct regmap *regmap = mux->regmap;
+ unsigned int reg = mux->reg;
+ unsigned int val;
+ int i;
+
+ regmap_read(regmap, reg, &val);
+ val >>= mux->shift;
+ val &= mux->mask;
+
+ for (i = 0; i < num_parents; i++)
+ if (mux->table[i] == val)
+ return i;
+
+ /*
+ * No parent? This should never happen!
+ * Verify if we set a valid parent in serdes_am654_clk_register()
+ */
+ WARN(1, "Failed to find the parent of %s clock\n", hw->init->name);
+
+ /* Make the parent lookup to fail */
+ return num_parents;
+}
+
+static int serdes_am654_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+ struct regmap *regmap = mux->regmap;
+ unsigned int reg = mux->reg;
+ int val;
+ int ret;
+
+ val = mux->table[index];
+
+ if (val == -1)
+ return -EINVAL;
+
+ val <<= mux->shift;
+ ret = regmap_update_bits(regmap, reg, mux->mask << mux->shift, val);
+
+ return ret;
+}
+
+static const struct clk_ops serdes_am654_clk_mux_ops = {
+ .set_parent = serdes_am654_clk_mux_set_parent,
+ .get_parent = serdes_am654_clk_mux_get_parent,
+};
+
+static int mux_table[SERDES_NUM_CLOCKS][3] = {
+ /*
+ * The entries represent values for selecting between
+ * {left input, external reference clock, right input}
+ * Only one of Left Output or Right Output should be used since
+ * both left and right output clock uses the same bits and modifying
+ * one clock will impact the other.
+ */
+ { BIT(2), 0, BIT(0) }, /* Mux of CMU refclk */
+ { -1, BIT(3), BIT(1) }, /* Mux of Left Output */
+ { BIT(1), BIT(3) | BIT(1), -1 }, /* Mux of Right Output */
+};
+
+static int mux_mask[SERDES_NUM_CLOCKS] = { 0x5, 0xa, 0xa };
+
+static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
+ const char *clock_name, int clock_num)
+{
+ struct device_node *node = am654_phy->of_node;
+ struct device *dev = am654_phy->dev;
+ struct serdes_am654_clk_mux *mux;
+ struct device_node *regmap_node;
+ const char **parent_names;
+ struct clk_init_data *init;
+ unsigned int num_parents;
+ struct regmap *regmap;
+ const __be32 *addr;
+ unsigned int reg;
+ struct clk *clk;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ init = &mux->clk_data;
+
+ regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
+ of_node_put(regmap_node);
+ if (!regmap_node) {
+ dev_err(dev, "Fail to get serdes-clk node\n");
+ return -ENODEV;
+ }
+
+ regmap = syscon_node_to_regmap(regmap_node->parent);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Fail to get Syscon regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ num_parents = of_clk_get_parent_count(node);
+ if (num_parents < 2) {
+ dev_err(dev, "SERDES clock must have parents\n");
+ return -EINVAL;
+ }
+
+ parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
+ GFP_KERNEL);
+ if (!parent_names)
+ return -ENOMEM;
+
+ of_clk_parent_fill(node, parent_names, num_parents);
+
+ addr = of_get_address(regmap_node, 0, NULL, NULL);
+ if (!addr)
+ return -EINVAL;
+
+ reg = be32_to_cpu(*addr);
+
+ init->ops = &serdes_am654_clk_mux_ops;
+ init->flags = CLK_SET_RATE_NO_REPARENT;
+ init->parent_names = parent_names;
+ init->num_parents = num_parents;
+ init->name = clock_name;
+
+ mux->table = mux_table[clock_num];
+ mux->regmap = regmap;
+ mux->reg = reg;
+ mux->shift = 4;
+ mux->mask = mux_mask[clock_num];
+ mux->hw.init = init;
+
+ /*
+ * setup a sane default so get_parent() call evaluates
+ * to a valid parent. Index 1 is the safest choice as
+ * the default as it is valid value for all of serdes's
+ * output clocks.
+ */
+ serdes_am654_clk_mux_set_parent(&mux->hw, 1);
+ clk = devm_clk_register(dev, &mux->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ am654_phy->clks[clock_num] = clk;
+
+ return 0;
+}
+
+static const struct of_device_id serdes_am654_id_table[] = {
+ {
+ .compatible = "ti,phy-am654-serdes",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, serdes_am654_id_table);
+
+static int serdes_am654_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct clk_onecell_data *clk_data;
+ struct serdes_am654 *am654_phy;
+ struct mux_control *control;
+ const char *clock_name;
+ struct regmap *regmap;
+ struct resource *res;
+ void __iomem *base;
+ struct phy *phy;
+ int ret;
+ int i;
+
+ am654_phy = devm_kzalloc(dev, sizeof(*am654_phy), GFP_KERNEL);
+ if (!am654_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "serdes");
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &serdes_am654_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to initialize regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ control = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
+ am654_phy->dev = dev;
+ am654_phy->of_node = node;
+ am654_phy->regmap = regmap;
+ am654_phy->control = control;
+ am654_phy->type = PHY_NONE;
+
+ platform_set_drvdata(pdev, am654_phy);
+
+ for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
+ ret = of_property_read_string_index(node, "clock-output-names",
+ i, &clock_name);
+ if (ret) {
+ dev_err(dev, "Failed to get clock name\n");
+ return ret;
+ }
+
+ ret = serdes_am654_clk_register(am654_phy, clock_name, i);
+ if (ret) {
+ dev_err(dev, "Failed to initialize clock %s\n",
+ clock_name);
+ return ret;
+ }
+ }
+
+ clk_data = &am654_phy->clk_data;
+ clk_data->clks = am654_phy->clks;
+ clk_data->clk_num = SERDES_NUM_CLOCKS;
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(dev);
+
+ phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, am654_phy);
+ phy_provider = devm_of_phy_provider_register(dev, serdes_am654_xlate);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ goto clk_err;
+ }
+
+ return 0;
+
+clk_err:
+ of_clk_del_provider(node);
+
+ return ret;
+}
+
+static int serdes_am654_remove(struct platform_device *pdev)
+{
+ struct serdes_am654 *am654_phy = platform_get_drvdata(pdev);
+ struct device_node *node = am654_phy->of_node;
+
+ pm_runtime_disable(&pdev->dev);
+ of_clk_del_provider(node);
+
+ return 0;
+}
+
+static struct platform_driver serdes_am654_driver = {
+ .probe = serdes_am654_probe,
+ .remove = serdes_am654_remove,
+ .driver = {
+ .name = "phy-am654",
+ .of_match_table = serdes_am654_id_table,
+ },
+};
+module_platform_driver(serdes_am654_driver);
+
+MODULE_ALIAS("platform:phy-am654");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI AM654x SERDES driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
\
 
 \ /
  Last update: 2019-03-25 09:10    [W:0.073 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site