lkml.org 
[lkml]   [2019]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/8] iio: adc: stm32-dfsdm: make spi_master_freq more accurate
On Thu, 21 Mar 2019 17:47:22 +0100
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:

> Current ckout divider may be set to a value that makes ckout to exceed
> spi-max-frequency. Rather use lower value (e.g. round up divider when
> ckout isn't accurate).
>
> Also when the SPI clock isn't accurate, 'spi_master_freq' is filled in
> with expected frequency. Use computed value instead to be more accurate:
> - e.g. source clock / (CKOUTDIV + 1)
>
> Enforce checks on the divider: ckoutdiv range can be from 1-255 to provide
> divider of 2-256.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes in v2:
> - rework the way to determine ckoutdiv bitfield: deal with divider directly
> to explicitly handle the rounding, the range constraints of 2-256 and the
> divider = ckoutdiv + 1.
> ---
> drivers/iio/adc/stm32-dfsdm-core.c | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c
> index bf089f5..472b809 100644
> --- a/drivers/iio/adc/stm32-dfsdm-core.c
> +++ b/drivers/iio/adc/stm32-dfsdm-core.c
> @@ -199,7 +199,7 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
> {
> struct device_node *node = pdev->dev.of_node;
> struct resource *res;
> - unsigned long clk_freq;
> + unsigned long clk_freq, divider;
> unsigned int spi_freq, rem;
> int ret;
>
> @@ -243,13 +243,20 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
> return 0;
> }
>
> - priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1;
> - if (!priv->spi_clk_out_div) {
> - /* spi_clk_out_div == 0 means ckout is OFF */
> + divider = div_u64_rem(clk_freq, spi_freq, &rem);
> + /* Round up divider when ckout isn't precise, not to exceed spi_freq */
> + if (rem)
> + divider++;
> +
> + /* programmable divider is in range of [2:256] */
> + if (divider < 2 || divider > 256) {
> dev_err(&pdev->dev, "spi-max-frequency not achievable\n");
> return -EINVAL;
> }
> - priv->dfsdm.spi_master_freq = spi_freq;
> +
> + /* SPI clock output divider is: divider = CKOUTDIV + 1 */
> + priv->spi_clk_out_div = divider - 1;
> + priv->dfsdm.spi_master_freq = clk_freq / (priv->spi_clk_out_div + 1);
>
> if (rem) {
> dev_warn(&pdev->dev, "SPI clock not accurate\n");

\
 
 \ /
  Last update: 2019-03-24 17:42    [W:0.096 / U:35.992 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site