lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] x86/cpu/hygon: Fix phys_proc_id calculation logic for multi-die processor
Date
For Hygon family 18h multi-die processor platform, which support 1-Die/
2-Die/4-Die per socket, the system view is shown in the following system
topology.

System View (with 1-Die 2-Socket):
|------------|
------ -----
SOCKET0 | D0 | | D1 | SOCKET1
------ -----

System View (with 2-Die 2-socket):
--------------------
| -------------|------
| | | |
------------ ------------
SOCKET0 | D1 -- D0 | | D3 -- D2 | SOCKET1
------------ ------------

System View (with 4-Die 2-Socket) :
--------------------
| -------------|------
| | | |
------------ ------------
| D1 -- D0 | | D7 -- D6 |
| | \/ | | | | \/ | |
SOCKET0 | | /\ | | | | /\ | | SOCKET1
| D2 -- D3 | | D4 -- D5 |
------------ ------------
| | | |
------|------------| |
--------------------

Current codes direct use "phys_proc_id = initial_apicid >> bits", which
calc phys_proc_id from initial_apicid by shifting *bits*, will get
wrong phys_proc_id for Hygon family 18h 1-Die/2-Die 2-socket system.

According to document [1] section 2.1.11.1, the *bits* is the value of
CPUID_Fn80000008_ECX[12:15]. The value may be 4, 5 or 6. The definitions
are: 4 - 1 die, 5 - 2 die, 6 - 3/4 die.

ApicId definition is as below (see section 2.1.10.2.1.3 of [1]):
-------------------------------------------------
Bit | 6 | 5 4 | 3 | 2 1 0 |
|-----------|---------|--------|----------------|
IDs | Socket ID | Node ID | CCX ID | Core/Thread ID |
-------------------------------------------------

So for 3/4-Die CPU the *bits* is 6, which is same to ApicID definition
field, which still can get correct socket ID for 2-socket system. But
for 1-Die or 2-Die CPU the *bits* is 4 or 5, which will cause the right
shifted result is not exactly the value of socket ID.

For Hygon family 18h CPU the socket ID should be obtained from ApicId[6].
To fix the problem and match ApicID field definition, adjust the shift
bits to 6 for all Hygon family 18h multi-die CPUs.

Reference:
[1] https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

Signed-off-by: Pu Wen <puwen@hygon.cn>
---
arch/x86/kernel/cpu/hygon.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/cpu/hygon.c b/arch/x86/kernel/cpu/hygon.c
index cf25405..2df6dd9 100644
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -87,6 +87,9 @@ static void hygon_get_topology(struct cpuinfo_x86 *c)
if (!err)
c->x86_coreid_bits = get_count_order(c->x86_max_cores);

+ /* Socket ID is ApicId[6] for these processors. */
+ c->phys_proc_id = c->apicid >> 6;
+
cacheinfo_hygon_init_llc_id(c, cpu, node_id);
} else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
u64 value;
--
2.7.4
\
 
 \ /
  Last update: 2019-03-22 12:14    [W:0.099 / U:0.324 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site