lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 04/15] drm/bridge: tc358767: Simplify tc_set_video_mode()
On Fri, Mar 22, 2019 at 3:19 AM Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
>
> On 22/03/2019 05:28, Andrey Smirnov wrote:
> > Simplify tc_set_video_mode() by replacing repreated calls to
> > tc_write()/regmap_write() with a single call to
> > regmap_multi_reg_write(). While at it, simplify explicit shifting by
> > using macros from <linux/bitfield.h>. No functional change intended.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Archit Taneja <architt@codeaurora.org>
> > Cc: Andrzej Hajda <a.hajda@samsung.com>
> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
> > Cc: Philipp Zabel <p.zabel@pengutronix.de>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: dri-devel@lists.freedesktop.org
> > Cc: linux-kernel@vger.kernel.org
> > ---
> > drivers/gpu/drm/bridge/tc358767.c | 146 +++++++++++++++++-------------
> > 1 file changed, 85 insertions(+), 61 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> > index 38d542f553cd..d99c9f32a133 100644
> > --- a/drivers/gpu/drm/bridge/tc358767.c
> > +++ b/drivers/gpu/drm/bridge/tc358767.c
> > @@ -24,6 +24,7 @@
> > * GNU General Public License for more details.
> > */
> >
> > +#include <linux/bitfield.h>
> > #include <linux/clk.h>
> > #include <linux/device.h>
> > #include <linux/gpio/consumer.h>
> > @@ -56,6 +57,7 @@
> >
> > /* Video Path */
> > #define VPCTRL0 0x0450
> > +#define VSDELAY GENMASK(31, 20)
> > #define OPXLFMT_RGB666 (0 << 8)
> > #define OPXLFMT_RGB888 (1 << 8)
> > #define FRMSYNC_DISABLED (0 << 4) /* Video Timing Gen Disabled */
> > @@ -63,9 +65,17 @@
> > #define MSF_DISABLED (0 << 0) /* Magic Square FRC disabled */
> > #define MSF_ENABLED (1 << 0) /* Magic Square FRC enabled */
> > #define HTIM01 0x0454
> > +#define HPW GENMASK(8, 0)
> > +#define HBPR GENMASK(24, 16)
> > #define HTIM02 0x0458
> > +#define HDISPR GENMASK(10, 0)
> > +#define HFPR GENMASK(24, 16)
> > #define VTIM01 0x045c
> > +#define VSPR GENMASK(7, 0)
> > +#define VBPR GENMASK(23, 16)
> > #define VTIM02 0x0460
> > +#define VFPR GENMASK(23, 16)
> > +#define VDISPR GENMASK(10, 0)
> > #define VFUEN0 0x0464
> > #define VFUEN BIT(0) /* Video Frame Timing Upload */
> >
> > @@ -100,14 +110,28 @@
> > /* Main Channel */
> > #define DP0_SECSAMPLE 0x0640
> > #define DP0_VIDSYNCDELAY 0x0644
> > +#define VID_SYNC_DLY GENMASK(15, 0)
> > +#define THRESH_DLY GENMASK(31, 16)
> > +
> > #define DP0_TOTALVAL 0x0648
> > +#define H_TOTAL GENMASK(15, 0)
> > +#define V_TOTAL GENMASK(31, 16)
> > #define DP0_STARTVAL 0x064c
> > +#define H_START GENMASK(15, 0)
> > +#define V_START GENMASK(31, 16)
> > #define DP0_ACTIVEVAL 0x0650
> > +#define H_ACT GENMASK(15, 0)
> > +#define V_ACT GENMASK(31, 16)
> > +
> > #define DP0_SYNCVAL 0x0654
> > +#define VS_WIDTH GENMASK(30, 16)
> > +#define HS_WIDTH GENMASK(14, 0)
> > #define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15)
> > #define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31)
> > #define DP0_MISC 0x0658
> > #define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */
> > +#define MAX_TU_SYMBOL GENMASK(28, 23)
> > +#define TU_SIZE GENMASK(21, 16)
> > #define BPC_6 (0 << 5)
> > #define BPC_8 (1 << 5)
> >
> > @@ -184,6 +208,12 @@
> >
> > /* Test & Debug */
> > #define TSTCTL 0x0a00
> > +#define COLOR_R GENMASK(31, 24)
> > +#define COLOR_G GENMASK(23, 16)
> > +#define COLOR_B GENMASK(15, 8)
> > +#define ENI2CFILTER BIT(4)
> > +#define COLOR_BAR_MODE GENMASK(1, 0)
> > +#define COLOR_BAR_MODE_BARS 2
> > #define PLL_DBG 0x0a04
> >
> > static bool tc_test_pattern;
> > @@ -647,10 +677,6 @@ static int tc_get_display_props(struct tc_data *tc)
> >
> > static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
> > {
> > - int ret;
> > - int vid_sync_dly;
> > - int max_tu_symbol;
> > -
> > int left_margin = mode->htotal - mode->hsync_end;
> > int right_margin = mode->hsync_start - mode->hdisplay;
> > int hsync_len = mode->hsync_end - mode->hsync_start;
> > @@ -659,76 +685,74 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
> > int vsync_len = mode->vsync_end - mode->vsync_start;
> >
> > /*
> > - * Recommended maximum number of symbols transferred in a transfer unit:
> > + * Recommended maximum number of symbols transferred in a
> > + * transfer unit:
> > * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
> > * (output active video bandwidth in bytes))
> > * Must be less than tu_size.
> > */
> > - max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
> > -
> > - dev_dbg(tc->dev, "set mode %dx%d\n",
> > - mode->hdisplay, mode->vdisplay);
> > - dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
> > - left_margin, right_margin, hsync_len);
> > - dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
> > - upper_margin, lower_margin, vsync_len);
> > - dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
> > -
> > + int max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
> >
> > + /* DP Main Stream Attributes */
> > + int vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
> > /*
> > * LCD Ctl Frame Size
> > * datasheet is not clear of vsdelay in case of DPI
> > * assume we do not need any delay when DPI is a source of
> > * sync signals
> > */
> > - tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
> > - OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
> > - tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
> > - (ALIGN(hsync_len, 2) << 0)); /* Hsync */
> > - tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) | /* H front porch */
> > - (ALIGN(mode->hdisplay, 2) << 0)); /* width */
> > - tc_write(VTIM01, (upper_margin << 16) | /* V back porch */
> > - (vsync_len << 0)); /* Vsync */
> > - tc_write(VTIM02, (lower_margin << 16) | /* V front porch */
> > - (mode->vdisplay << 0)); /* height */
> > - tc_write(VFUEN0, VFUEN); /* update settings */
> > -
> > - /* Test pattern settings */
> > - tc_write(TSTCTL,
> > - (120 << 24) | /* Red Color component value */
> > - (20 << 16) | /* Green Color component value */
> > - (99 << 8) | /* Blue Color component value */
> > - (1 << 4) | /* Enable I2C Filter */
> > - (2 << 0) | /* Color bar Mode */
> > - 0);
> > -
> > - /* DP Main Stream Attributes */
> > - vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
> > - tc_write(DP0_VIDSYNCDELAY,
> > - (max_tu_symbol << 16) | /* thresh_dly */
> > - (vid_sync_dly << 0));
> > + const u32 vs_pol = mode->flags & DRM_MODE_FLAG_NVSYNC ?
> > + SYNCVAL_VS_POL_ACTIVE_LOW : 0;
> > + const u32 hs_pol = mode->flags & DRM_MODE_FLAG_NHSYNC ?
> > + SYNCVAL_HS_POL_ACTIVE_LOW : 0;
> > + const struct reg_sequence video_mode_settings[] = {
> > + { VPCTRL0, FIELD_PREP(VSDELAY, 0) |
> > + OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED },
> > + { HTIM01, FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
> > + FIELD_PREP(HPW, ALIGN(hsync_len, 2)) },
> > + { HTIM02, FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
> > + FIELD_PREP(HFPR, ALIGN(right_margin, 2)) },
> > + { VTIM01, FIELD_PREP(VBPR, upper_margin) |
> > + FIELD_PREP(VSPR, vsync_len) },
> > + { VTIM02, FIELD_PREP(VFPR, lower_margin) |
> > + FIELD_PREP(VDISPR, mode->vdisplay) },
> > + { VFUEN0, VFUEN },
> > + { TSTCTL, FIELD_PREP(COLOR_R, 120) |
> > + FIELD_PREP(COLOR_G, 20) |
> > + FIELD_PREP(COLOR_B, 99) |
> > + ENI2CFILTER |
> > + FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS) },
> > + { DP0_VIDSYNCDELAY, FIELD_PREP(THRESH_DLY, max_tu_symbol) |
> > + FIELD_PREP(VID_SYNC_DLY, vid_sync_dly) },
> > + { DP0_TOTALVAL, FIELD_PREP(H_TOTAL, mode->htotal) |
> > + FIELD_PREP(V_TOTAL, mode->vtotal) },
> > + { DP0_STARTVAL, FIELD_PREP(H_START, left_margin + hsync_len) |
> > + FIELD_PREP(V_START,
> > + upper_margin + vsync_len) },
> > + { DP0_ACTIVEVAL, FIELD_PREP(V_ACT, mode->vdisplay) |
> > + FIELD_PREP(H_ACT, mode->hdisplay) },
> > + { DP0_SYNCVAL, FIELD_PREP(VS_WIDTH, vsync_len) |
> > + FIELD_PREP(HS_WIDTH, hsync_len) |
> > + hs_pol | vs_pol },
> > + { DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
> > + DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
> > + DPI_BPP_RGB888 },
> > + { DP0_MISC, FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
> > + FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
> > + BPC_8 },
> > + };
> >
> > - tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
> > -
> > - tc_write(DP0_STARTVAL,
> > - ((upper_margin + vsync_len) << 16) |
> > - ((left_margin + hsync_len) << 0));
> > -
> > - tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
> > -
> > - tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
> > - ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
> > - ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
> > -
> > - tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
> > - DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
> > -
> > - tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
> > - BPC_8);
> > + dev_dbg(tc->dev, "set mode %dx%d\n",
> > + mode->hdisplay, mode->vdisplay);
> > + dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
> > + left_margin, right_margin, hsync_len);
> > + dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
> > + upper_margin, lower_margin, vsync_len);
> > + dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
> >
> > - return 0;
> > -err:
> > - return ret;
> > + return regmap_multi_reg_write(tc->regmap,
> > + video_mode_settings,
> > + ARRAY_SIZE(video_mode_settings));
> > }
> >
> > static int tc_wait_link_training(struct tc_data *tc, u32 *error)
>
> I don't like this change. I think multi_reg_write is good for writing
> things like, say, color conversion table. But the data for video mode is
> more complex and needs more logic (e.g. here ?: operator is used).

The logic was stuffed into function arguments before, so this patch
didn't really change anything.

> You need to stuff all that logic into variable initializers. You can't use
> e.g. if() anymore,

Where you planning on doing so, or is it just hypothetical?

> and you can't even insert a debug print between the
> writes if you need to.
>

Same here.

> So, in my opinion, this doesn't look (much) cleaner, and makes life more
> difficult.
>

Sure, I'll drop this patch since it generates so much resistance.

Thanks,
Andrey Smirnov

\
 
 \ /
  Last update: 2019-03-22 18:25    [W:0.095 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site