lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 1/5] mtd: cfi_cmdset_0002: Add support for polling status register
Date
HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command
Set(0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c
can be use as is. But these devices do not support DQ polling method of
determining chip ready/good status. These flashes provide Status
Register whose bits can be polled to know status of flash operation.

Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu
Extended Query version 1.5. Bit 0 of "Software Features supported" field
of CFI Primary Vendor-Specific Extended Query table indicates
presence/absence of status register and Bit 1 indicates whether or not
DQ polling is supported. Using these bits, its possible to determine
whether flash supports DQ polling or need to use Status Register.

Add support for polling status register to know device ready/status of
erase/write operations when DQ polling is not supported.

[1] https://www.cypress.com/file/213346/download

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 50 +++++++++++++++++++++++++++++
include/linux/mtd/cfi.h | 5 +++
2 files changed, 55 insertions(+)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 72428b6bfc47..29987d8e6c6e 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -49,6 +49,14 @@
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6

+/*
+ * Bits of Status Register definition for flash devices that don't
+ * support DQ polling (Eg.: Hyperflash)
+ */
+#define CFI_SR_DRB BIT(7)
+#define CFI_SR_ESB BIT(5)
+#define CFI_SR_PSB BIT(4)
+
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -97,6 +105,18 @@ static struct mtd_chip_driver cfi_amdstd_chipdrv = {
.module = THIS_MODULE
};

+/*
+ * Use status register to poll for Erase/write completion when DQ is not
+ * supported. This is indicated by Bit[1:0] of SoftwareFeatures field in
+ * CFI Primary Vendor-Specific Extended Query table 1.5
+ */
+static int cfi_use_status_reg(struct cfi_private *cfi)
+{
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+
+ return (extp->MinorVersion >= '5') &&
+ (extp->SoftwareFeatures & 0x11) == 1;
+}

/* #define DEBUG_CFI_FEATURES */

@@ -744,8 +764,21 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
*/
static int __xipram chip_ready(struct map_info *map, unsigned long addr)
{
+ struct cfi_private *cfi = map->fldrv_priv;
map_word d, t;

+ if (cfi_use_status_reg(cfi)) {
+ /*
+ * For chips that support status register, check device
+ * ready bit
+ */
+ cfi_send_gen_cmd(0x70, cfi->addr_unlock1, 0, map, cfi,
+ cfi->device_type, NULL);
+ d = map_read(map, addr);
+
+ return d.x[0] & CFI_SR_DRB;
+ }
+
d = map_read(map, addr);
t = map_read(map, addr);

@@ -769,8 +802,25 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr)
*/
static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
{
+ struct cfi_private *cfi = map->fldrv_priv;
map_word oldd, curd;

+ if (cfi_use_status_reg(cfi)) {
+ /*
+ * For chips that support status register, check device
+ * ready bit and Erase/Program status bit to know if
+ * operation succeeded.
+ */
+ cfi_send_gen_cmd(0x70, cfi->addr_unlock1, 0, map, cfi,
+ cfi->device_type, NULL);
+ curd = map_read(map, addr);
+
+ if (curd.x[0] & CFI_SR_DRB)
+ return !(curd.x[0] & (CFI_SR_PSB | CFI_SR_ESB));
+
+ return 0;
+ }
+
oldd = map_read(map, addr);
curd = map_read(map, addr);

diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index cbf77168658c..92ac82ac2329 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -233,6 +233,11 @@ struct cfi_pri_amdstd {
uint8_t VppMin;
uint8_t VppMax;
uint8_t TopBottom;
+ /* Below field are added from version 1.5 */
+ uint8_t ProgramSuspend;
+ uint8_t UnlockBypass;
+ uint8_t SecureSiliconSector;
+ uint8_t SoftwareFeatures;
} __packed;

/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
--
2.21.0
\
 
 \ /
  Last update: 2019-03-21 18:46    [W:0.112 / U:3.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site