lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/5] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
Date
The VCNL4040 is almost identical to the VCNL4200 as far as register
layout goes but just need to check a different ID register location.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
---
drivers/iio/light/vcnl4000.c | 51 ++++++++++++++++++++++++++++++------
1 file changed, 43 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 308cb2d2b641..12c52f2b853a 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1,8 +1,9 @@
/*
- * vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4200 combined ambient
+ * vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4040/4200 combined ambient
* light and proximity sensor
*
* Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright 2019 Pursim SPC
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
@@ -10,13 +11,14 @@
*
* IIO driver for:
* VCNL4000/10/20 (7-bit I2C slave address 0x13)
+ * VCNL4040 (7-bit I2C slave address 0x60)
* VCNL4200 (7-bit I2C slave address 0x51)
*
* TODO:
* allow to adjust IR current
* proximity threshold and event handling
* periodic ALS/proximity measurement (VCNL4010/20)
- * interrupts (VCNL4010/20, VCNL4200)
+ * interrupts (VCNL4010/20/40, VCNL4200)
*/

#include <linux/module.h>
@@ -30,6 +32,7 @@
#define VCNL4000_DRV_NAME "vcnl4000"
#define VCNL4000_PROD_ID 0x01
#define VCNL4010_PROD_ID 0x02 /* for VCNL4020, VCNL4010 */
+#define VCNL4040_PROD_ID 0x86
#define VCNL4200_PROD_ID 0x58

#define VCNL4000_COMMAND 0x80 /* Command register */
@@ -49,6 +52,8 @@
#define VCNL4200_AL_DATA 0x09 /* Ambient light data */
#define VCNL4200_DEV_ID 0x0e /* Device ID, slave address and version */

+#define VCNL4040_DEV_ID 0x0c /* Device ID and version */
+
/* Bit masks for COMMAND register */
#define VCNL4000_AL_RDY BIT(6) /* ALS data ready? */
#define VCNL4000_PS_RDY BIT(5) /* proximity data ready? */
@@ -58,6 +63,7 @@
enum vcnl4000_device_ids {
VCNL4000,
VCNL4010,
+ VCNL4040,
VCNL4200,
};

@@ -90,6 +96,7 @@ static const struct i2c_device_id vcnl4000_id[] = {
{ "vcnl4000", VCNL4000 },
{ "vcnl4010", VCNL4010 },
{ "vcnl4020", VCNL4010 },
+ { "vcnl4040", VCNL4040 },
{ "vcnl4200", VCNL4200 },
{ }
};
@@ -128,14 +135,26 @@ static int vcnl4000_init(struct vcnl4000_data *data)

static int vcnl4200_init(struct vcnl4000_data *data)
{
- int ret;
+ int ret, id;

ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID);
if (ret < 0)
return ret;

- if ((ret & 0xff) != VCNL4200_PROD_ID)
- return -ENODEV;
+ id = ret & 0xff;
+
+ if (id != VCNL4200_PROD_ID) {
+ ret = i2c_smbus_read_word_data(data->client, VCNL4040_DEV_ID);
+ if (ret < 0)
+ return ret;
+
+ id = ret & 0xff;
+
+ if (id != VCNL4040_PROD_ID)
+ return -ENODEV;
+ }
+
+ dev_dbg(&data->client->dev, "device id 0x%x", id);

data->rev = (ret >> 8) & 0xf;

@@ -150,9 +169,19 @@ static int vcnl4200_init(struct vcnl4000_data *data)
data->al_scale = 24000;
data->vcnl4200_al.reg = VCNL4200_AL_DATA;
data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
- /* Integration time is 50ms, but the experiments show 54ms in total. */
- data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
- data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
+ switch (id) {
+ case VCNL4200_PROD_ID:
+ /* Integration time is 50ms, but the experiments */
+ /* show 54ms in total. */
+ data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
+ data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
+ break;
+ case VCNL4040_PROD_ID:
+ /* Integration time is 80ms, add 10ms. */
+ data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000);
+ data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000);
+ break;
+ }
data->vcnl4200_al.last_measurement = ktime_set(0, 0);
data->vcnl4200_ps.last_measurement = ktime_set(0, 0);
mutex_init(&data->vcnl4200_al.lock);
@@ -271,6 +300,12 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
.measure_light = vcnl4000_measure_light,
.measure_proximity = vcnl4000_measure_proximity,
},
+ [VCNL4040] = {
+ .prod = "VCNL4040",
+ .init = vcnl4200_init,
+ .measure_light = vcnl4200_measure_light,
+ .measure_proximity = vcnl4200_measure_proximity,
+ },
[VCNL4200] = {
.prod = "VCNL4200",
.init = vcnl4200_init,
--
2.17.1
\
 
 \ /
  Last update: 2019-03-21 16:41    [W:0.107 / U:0.668 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site