lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] ARM: dts: omap4-droid4: Update backlight dt properties
Date
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..aea206f04f76 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@
};

&i2c1 {
- lm3532@38 {
+ led-controller@38 {
compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x38>;

enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;

- lcd_backlight: backlight {
- compatible = "ti,lm3532-backlight";
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;

- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <1>;
- ramp-down-msec = <0>;
- };
+ lcd_backlight: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = "backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = "platform::kbd_backlight";
};
};
};
--
2.21.0.5.gaeb582a983
\
 
 \ /
  Last update: 2019-03-21 15:30    [W:0.130 / U:2.992 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site