lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
On 15/03/2019 11:51:12-0700, Stephen Boyd wrote:
> If we encounter a failure during suspend where this RTC was programmed
> to wakeup the system from suspend, but that wakeup couldn't be
> configured because the system didn't support wakeup interrupts, we'll
> run into the following warning:
>
> Unbalanced IRQ 166 wake disable
> WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278
>
> This happens because the suspend process isn't aborted when the RTC
> fails to configure the wakeup IRQ. Instead, we continue suspending the
> system and then another suspend callback fails the suspend process and
> "unwinds" the previously suspended drivers by calling their resume
> callbacks. When we get back to resuming this RTC driver, we'll call
> disable_irq_wake() on an IRQ that hasn't been configured for wake.
>
> Let's just fail suspend/resume here if we can't configure the system to
> wake and the user has chosen to wakeup with this device. This fixes this
> warning and makes the code more robust in case there are systems out
> there that can't wakeup from suspend on this line but the user has
> chosen to do so.
>
> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Cc: Evan Green <evgreen@chromium.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> drivers/rtc/rtc-cros-ec.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Applied, thanks.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-03-20 11:38    [W:1.537 / U:13.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site