lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] test_sysctl: allow graceful use on older kernels
Date
On old kernels older new test knobs implemented on the test_sysctl
module may not be available. This is expected, and the selftests test
scripts should be able to run without failures on older kernels.

Generalize a solution so that we test for each required test target
file for each test by requiring each test description to annotate their
respective test target file. If the target file does not exist, we skip
the test gracefully.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
tools/testing/selftests/sysctl/sysctl.sh | 78 ++++++++++++++++--------
1 file changed, 53 insertions(+), 25 deletions(-)

diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
index f51987d0d32d..4eb019068e24 100755
--- a/tools/testing/selftests/sysctl/sysctl.sh
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -24,19 +24,20 @@ TEST_FILE=$(mktemp)

# This represents
#
-# TEST_ID:TEST_COUNT:ENABLED
+# TEST_ID:TEST_COUNT:ENABLED:TARGET
#
# TEST_ID: is the test id number
# TEST_COUNT: number of times we should run the test
# ENABLED: 1 if enabled, 0 otherwise
+# TARGET: test target file required on the test_sysctl module
#
# Once these are enabled please leave them as-is. Write your own test,
# we have tons of space.
-ALL_TESTS="0001:1:1"
-ALL_TESTS="$ALL_TESTS 0002:1:1"
-ALL_TESTS="$ALL_TESTS 0003:1:1"
-ALL_TESTS="$ALL_TESTS 0004:1:1"
-ALL_TESTS="$ALL_TESTS 0005:3:1"
+ALL_TESTS="0001:1:1:int_0001"
+ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001"
+ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002"
+ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001"
+ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003"

test_modprobe()
{
@@ -157,8 +158,10 @@ reset_vals()

set_orig()
{
- if [ ! -z $TARGET ]; then
- echo "${ORIG}" > "${TARGET}"
+ if [ ! -z $TARGET ] && [ ! -z $ORIG ]; then
+ if [ -f ${TARGET} ]; then
+ echo "${ORIG}" > "${TARGET}"
+ fi
fi
}

@@ -600,9 +603,21 @@ run_stringtests()
test_rc
}

+target_exists()
+{
+ TARGET="${SYSCTL}/$1"
+ TEST_ID="$2"
+
+ if [ ! -f ${TARGET} ] ; then
+ echo "Target for test $TEST_ID: $TARGET not exist, skipping test ..."
+ return 0
+ fi
+ return 1
+}
+
sysctl_test_0001()
{
- TARGET="${SYSCTL}/int_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0001)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
@@ -614,7 +629,7 @@ sysctl_test_0001()

sysctl_test_0002()
{
- TARGET="${SYSCTL}/string_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0002)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR="Testing sysctl"
@@ -627,7 +642,7 @@ sysctl_test_0002()

sysctl_test_0003()
{
- TARGET="${SYSCTL}/int_0002"
+ TARGET="${SYSCTL}/$(get_test_target 0003)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
@@ -640,7 +655,7 @@ sysctl_test_0003()

sysctl_test_0004()
{
- TARGET="${SYSCTL}/uint_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0004)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
@@ -653,7 +668,7 @@ sysctl_test_0004()

sysctl_test_0005()
{
- TARGET="${SYSCTL}/int_0003"
+ TARGET="${SYSCTL}/$(get_test_target 0005)"
reset_vals
ORIG=$(cat "${TARGET}")

@@ -722,25 +737,36 @@ function get_test_count()
{
test_num $1
TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
- LAST_TWO=${TEST_DATA#*:*}
- echo ${LAST_TWO%:*}
+ echo ${TEST_DATA} | awk -F":" '{print $2}'
}

function get_test_enabled()
{
test_num $1
TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
- echo ${TEST_DATA#*:*:}
+ echo ${TEST_DATA} | awk -F":" '{print $3}'
+}
+
+function get_test_target()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ echo ${TEST_DATA} | awk -F":" '{print $4}'
}

function run_all_tests()
{
for i in $ALL_TESTS ; do
- TEST_ID=${i%:*:*}
+ TEST_ID=${i%:*:*:*}
ENABLED=$(get_test_enabled $TEST_ID)
TEST_COUNT=$(get_test_count $TEST_ID)
+ TEST_TARGET=$(get_test_target $TEST_ID)
+ target_exists $TEST_TARGET $TEST_ID
+ if [ $? -ne 1 ]; then
+ continue
+ fi
if [[ $ENABLED -eq "1" ]]; then
- test_case $TEST_ID $TEST_COUNT
+ test_case $TEST_ID $TEST_COUNT $TEST_TARGET
fi
done
}
@@ -773,12 +799,14 @@ function watch_case()

function test_case()
{
- NUM_TESTS=$DEFAULT_NUM_TESTS
- if [ $# -eq 2 ]; then
- NUM_TESTS=$2
- fi
+ NUM_TESTS=$2

i=0
+
+ if target_exists $3 $1; then
+ continue
+ fi
+
while [ $i -lt $NUM_TESTS ]; do
test_num $1
watch_log $i ${TEST_NAME}_test_$1 noclear
@@ -801,15 +829,15 @@ function parse_args()
elif [[ "$1" = "-t" ]]; then
shift
test_num $1
- test_case $1 $(get_test_count $1)
+ test_case $1 $(get_test_count $1) $(get_test_target $1)
elif [[ "$1" = "-c" ]]; then
shift
test_num $1
test_num $2
- test_case $1 $2
+ test_case $1 $2 $(get_test_target $1)
elif [[ "$1" = "-s" ]]; then
shift
- test_case $1 1
+ test_case $1 1 $(get_test_target $1)
elif [[ "$1" = "-l" ]]; then
list_tests
elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
--
2.18.0
\
 
 \ /
  Last update: 2019-03-20 23:29    [W:0.102 / U:1.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site