lkml.org 
[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/7] x86/boot: Introduce MMIO accessors and their support in earlyprintk
Date
If user supplied serial base address via kernel command line and
at the same time the word 'mmio' is present, use MMIO accessors.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/boot/early_serial_console.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c
index 98aee6c6e374..cfc9e55cd68a 100644
--- a/arch/x86/boot/early_serial_console.c
+++ b/arch/x86/boot/early_serial_console.c
@@ -33,6 +33,20 @@ static void io_serial_out(unsigned long addr, int offset, int value)
outb(value, addr + offset);
}

+static void mem8_serial_out(unsigned long addr, int offset, int value)
+{
+ u8 __iomem *vaddr = (u8 __iomem *)addr;
+ /* shift implied by pointer type */
+ writeb(value, vaddr + offset);
+}
+
+static unsigned int mem8_serial_in(unsigned long addr, int offset)
+{
+ u8 __iomem *vaddr = (u8 __iomem *)addr;
+ /* shift implied by pointer type */
+ return readb(vaddr + offset);
+}
+
static void early_serial_configure(unsigned long port, int baud)
{
unsigned char c;
@@ -59,6 +73,13 @@ static void early_serial_use_io_accessors(void)
serial_out = io_serial_out;
}

+static void early_serial_use_mmio_accessors(void)
+{
+ /* It is memory mapped - assume 8-bit alignment */
+ serial_in = mem8_serial_in;
+ serial_out = mem8_serial_out;
+}
+
static void early_serial_init(unsigned long port, int baud)
{
early_serial_configure(port, baud);
@@ -101,12 +122,16 @@ static void parse_earlyprintk(void)
/*
* make sure we have
* "serial,0x3f8,115200"
+ * "serial,mmio,0xff010180,115200"
* "serial,ttyS0,115200"
* "ttyS0,115200"
*/
if (pos == 7 && !strncmp(arg + pos, "0x", 2)) {
port = parse_serial_port(arg, pos + 0, &pos);
early_serial_use_io_accessors();
+ } else if (pos == 7 && !strncmp(arg + pos, "mmio,0x", 7)) {
+ port = parse_serial_port(arg, pos + 5, &pos);
+ early_serial_use_mmio_accessors();
} else if (!strncmp(arg + pos, "ttyS", 4)) {
static const int bases[] = { 0x3f8, 0x2f8 };
int idx = 0;
--
2.20.1
\
 
 \ /
  Last update: 2019-03-19 19:44    [W:0.176 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site