lkml.org 
[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/12] dt-bindings: xilinx-sdfec: Add SDFEC binding
Date
Add the Soft Decision Forward Error Correction (SDFEC) Engine
bindings which is available for the Zynq UltraScale+ RFSoC
FPGA's.

Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
---
.../devicetree/bindings/misc/xlnx,sd-fec.txt | 58 ++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt

diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
new file mode 100644
index 0000000..8af0adc
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
@@ -0,0 +1,58 @@
+* Xilinx SDFEC(16nm) IP *
+
+The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+which provides high-throughput LDPC and Turbo Code implementations.
+The LDPC decode & encode functionality is capable of covering a range of
+customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+principally covers codes used by LTE. The FEC Engine offers significant
+power and area savings versus implementations done in the FPGA fabric.
+
+
+Required properties:
+- compatible: Must be "xlnx,sd-fec-1.1"
+- clock-names : List of input clock names from the following:
+ - "core_clk", Main processing clock for processing core (required)
+ - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
+ - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
+ - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
+ - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional)
+ - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
+ - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
+ - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
+- clocks : Clock phandles (see clock_bindings.txt for details).
+- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
+ location and length.
+- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
+ being used.
+- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
+ driven with a fixed value and is not present on the device, a value of 1
+ configures the DIN_WORDS to be block based, while a value of 2 configures the
+ DIN_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
+ configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+ of "4x128b".
+- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
+ driven with a fixed value and is not present on the device, a value of 1
+ configures the DOUT_WORDS to be block based, while a value of 2 configures the
+ DOUT_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
+ configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+ of "4x128b".
+Optional properties:
+- interrupts: should contain SDFEC interrupt number
+
+Example
+---------------------------------------
+ sd_fec_0: sd-fec@a0040000 {
+ compatible = "xlnx,sd-fec-1.1";
+ clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk", "s_axis_din_aclk", "m_axis_status_aclk", "m_axis_dout_aclk";
+ clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>, <&misc_clk_1>, <&misc_clk_1>;
+ reg = <0x0 0xa0040000 0x0 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 89 4>;
+ xlnx,sdfec-code = "ldpc";
+ xlnx,sdfec-din-words = <0>;
+ xlnx,sdfec-din-width = <2>;
+ xlnx,sdfec-dout-words = <0>;
+ xlnx,sdfec-dout-width = <1>;
+ };
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

\
 
 \ /
  Last update: 2019-03-19 13:05    [W:1.408 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site