lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] PCI: qcom: Use default config space read function
From
Date
Hi Marc,

Thanks for the patch!

On 3/18/19 4:28 PM, Marc Gonzalez wrote:
> We don't need to fudge the device class in qcom_pcie_rd_own_conf()
> because dw_pcie_setup_rc() already does the right thing:
>
> /* Program correct class for RC */
> dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
>
> However, the above has no effect on 8064, thus a fixup is required.
>
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> ---
> Changes from v2 to v3: Add fixup for 8064 quirk
> Changes from v1 to v2: Completely drop qcom_pcie_rd_own_conf
>
> Stanimir, could you test this submission and send a Tested-by if it works?
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 23 ++++++-----------------
> 1 file changed, 6 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index d185ea5fe996..6fefff106b87 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
> return ret;
> }
>
> -static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> - u32 *val)
> -{
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> - /* the device class is not reported correctly from the register */
> - if (where == PCI_CLASS_REVISION && size == 4) {
> - *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
> - *val &= 0xff; /* keep revision id */
> - *val |= PCI_CLASS_BRIDGE_PCI << 16;
> - return PCIBIOS_SUCCESSFUL;
> - }
> -
> - return dw_pcie_read(pci->dbi_base + where, size, val);
> -}
> -
> static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
> .host_init = qcom_pcie_host_init,
> - .rd_own_conf = qcom_pcie_rd_own_conf,
> };
>
> /* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
> @@ -1299,6 +1282,12 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> return ret;
> }
>
> +static void qcom_fixup_class(struct pci_dev *dev)
> +{
> + dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); // 8064

Please make 0x101 a define, and drop //

I will try to find device IDs for ipq8064 and ipq4019.

--
regards,
Stan

\
 
 \ /
  Last update: 2019-03-18 17:35    [W:0.089 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site