lkml.org 
[lkml]   [2019]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 07/10] drivers: pinctrl: msm: setup GPIO irqchip hierarchy
On Fri, 15 Mar 2019 09:28:31 -0700
Stephen Boyd <swboyd@chromium.org> wrote:

> Quoting Lina Iyer (2019-03-13 14:18:41)
> > ---
> > Changes in v4:
> > - Remove irq_set_wake() on summary IRQ interrupt
> > Changes in v3:
> > - Use of_irq_domain_map() and pass PDC pin to parent irqdomain
> > Changes in v2:
> > - Call parent mask when masking GPIO interrupt
> > Changes in v1:
> > - Fix bug when unmasking PDC interrupt
> [...]
> > +}
> > +
> > +/*
> > + * TODO: Get rid of this and push it into gpiochip_to_irq()
> > + */
>
> Any chance this TODO can be resolved?
>
> > @@ -994,6 +1092,22 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
> > pctrl->irq_chip.irq_request_resources = msm_gpio_irq_reqres;
> > pctrl->irq_chip.irq_release_resources = msm_gpio_irq_relres;
> >
> > + chip->irq.chip = &pctrl->irq_chip;
> > + chip->irq.domain_ops = &msm_gpio_domain_ops;
> > + chip->irq.handler = handle_edge_irq;
> > + chip->irq.default_type = IRQ_TYPE_EDGE_RISING;
>
> This also changed from v3. It used to be IRQ_TYPE_NONE. Specifying this
> here seems to cause gpiolib to print a WARN.
>
>
> /*
> * Specifying a default trigger is a terrible idea if DT or ACPI is
> * used to configure the interrupts, as you may end up with
> * conflicting triggers. Tell the user, and reset to NONE.
> */
> if (WARN(np && type != IRQ_TYPE_NONE,
> "%s: Ignoring %u default trigger\n", np->full_name, type))
> type = IRQ_TYPE_NONE;
>
>
> So I guess this change should be dropped. Or at the least, it should be
> split out to it's own patch and the motivations can be discussed in the
> commit text.

It is something I requested (although I expected this to be a
different patch, and even a clarification would have been OK).

One way or another, the default trigger must match the flow handler. If
we set it up with IRQ_TYPE_NONE, what does it mean? The fact that
IRQ_TYPE_NONE acts as a wildcard doesn't mean the handle_edge_irq flow
handler is a good match for all interrupt types (it is rarely OK for
level interrupts).

Thanks,

M.
--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2019-03-16 12:40    [W:0.139 / U:14.060 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site