[lkml]   [2019]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 00/11] staging: iio: ad7780: move out of staging
This series of patches contains the following:
- Adds user input for the 'gain' and 'filter' GPIO pins for the ad778x
family chips;
- Missing switch default case tidy up;
- Gain reading for the ad778x;
- Filter reading for the ad778x;
- Sets pattern macro values and mask for PATTERN status bits;
- Adds ID values for the ad7170, ad7171, ad7780 and ad7781 for ID
status bits checking;
- Moves regulator initialization to after GPIO init to maintain
consistency between probe and remove;
- Copyright edits, adding SPDX identifier and new copyright holder;
- Moves the ad7780 driver out of staging to the mainline;
- Adds device tree binding for the ad7780 driver.

Renato Lui Geh (11):
staging: iio: ad7780: add gain & filter gpio support
staging: iio: ad7780: add missing switch default case
staging: iio: ad7780: add gain reading to ad778x
staging: iio: ad7780: add filter reading to ad778x
staging: iio: ad7780: set pattern values and masks directly
staging:iio:ad7780: add chip ID values and mask
staging: iio: ad7780: move regulator to after GPIO init
staging: iio: ad7780: add SPDX identifier
staging: iio: ad7780: add new copyright holder
staging: iio: ad7780: moving ad7780 out of staging
staging: iio: ad7780: add device tree binding

- SPDX and regulator init as patches
- Renamed filter to odr and ad778x_filter to ad778x_odr_avail
- Removed unnecessary regulator disabling
- Removed unnecessary AD_SD_CHANNEL macro
- Changed unsigned int to unsigned long long to avoid overflow
- Split gain & filter patch into two, with the new commit adding only
filter reading
- Changed pattern values to direct values, and added pattern mask
- Added ID values and mask
- Added new copyright holder
- Added device tree binding to the ad7780 driver
- Tidy ups
- Gain reading split from "gain & filter gpio support" commit to its
own separate patch
- ad778x_odr_avail moved to more appropriate patch
- Init GPIOs in a separate function
- Raise error when ad717x tries to perform a write operation

.../bindings/iio/adc/adi,ad7780.txt | 48 +++
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7780.c | 376 ++++++++++++++++++
drivers/staging/iio/adc/Kconfig | 13 -
drivers/staging/iio/adc/Makefile | 1 -
drivers/staging/iio/adc/ad7780.c | 277 -------------
7 files changed, 437 insertions(+), 291 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
create mode 100644 drivers/iio/adc/ad7780.c
delete mode 100644 drivers/staging/iio/adc/ad7780.c


 \ /
  Last update: 2019-03-16 03:11    [W:0.104 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site