lkml.org 
[lkml]   [2019]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 07/11] arm64: dts: meson-g12a-x96-max: Enable BT Module
Hi Neil,

On Mon, Mar 11, 2019 at 10:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Enable the Bluetooth Module on the X96 Max Set-Top-Box.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I didn't have time to test this yet but it looks sane to me, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 21e5de48613e..61606601fb4f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -88,6 +88,18 @@
> };
> };
>
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
you could add:
host-wakeup-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
(at least according to the output of /sys/kernel/debug/gpio and the
.dtb on my X96 Max)


Regards
Martin

\
 
 \ /
  Last update: 2019-03-15 22:49    [W:0.096 / U:0.348 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site