lkml.org 
[lkml]   [2019]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/7] s390: ap: kvm: add PQAP interception for AQIC
From
Date
On 15/03/2019 11:20, Cornelia Huck wrote:
> On Wed, 13 Mar 2019 17:04:58 +0100
> Pierre Morel <pmorel@linux.ibm.com> wrote:
>
>> +/*
>> + * handle_pqap: Handling pqap interception
>> + * @vcpu: the vcpu having issue the pqap instruction
>> + *
>> + * We now support PQAP/AQIC instructions and we need to correctly
>> + * answer the guest even if no dedicated driver's hook is available.
>> + *
>> + * The intercepting code calls a dedicated callback for this instruction
>> + * if a driver did register one in the CRYPTO satellite of the
>> + * SIE block.
>> + *
>> + * For PQAP/AQIC instructions only, verify privilege and specifications.
>> + *
>> + * If no callback available, the queues are not available, return this to
>> + * the caller.
>> + * Else return the value returned by the callback.
>> + */
>> +static int handle_pqap(struct kvm_vcpu *vcpu)
>> +{
>> + uint8_t fc;
>> + struct ap_queue_status status = {};
>> + int ret;
>> + /* Verify that the AP instruction are available */
>> + if (!ap_instructions_available())
>> + return -EOPNOTSUPP;
>> + /* Verify that the guest is allowed to use AP instructions */
>> + if (!(vcpu->arch.sie_block->eca & ECA_APIE))
>> + return -EOPNOTSUPP;
>> + /* Verify that the function code is AQIC */
>> + fc = vcpu->run->s.regs.gprs[0] >> 24;
>> + /* We do not want to change the behavior we had before this patch*/
>> + if (fc != 0x03)
>> + return -EOPNOTSUPP;
>> +
>> + /* PQAP instructions are allowed for guest kernel only */
>> + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
>> + return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
>> + /* AQIC instruction is allowed only if facility 65 is available */
>> + if (!test_kvm_facility(vcpu->kvm, 65))
>> + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
>> + /* Verify that the hook callback is registered and call it */
>> + if (vcpu->kvm->arch.crypto.pqap_hook) {
>> + if (!try_module_get(vcpu->kvm->arch.crypto.pqap_hook->owner))
>> + return -EOPNOTSUPP;
>> + ret = vcpu->kvm->arch.crypto.pqap_hook->hook(vcpu);
>> + module_put(vcpu->kvm->arch.crypto.pqap_hook->owner);
>> + return ret;
>> + }
>> + /*
>> + * It is the duty of the vfio_driver to register a hook
>> + * If it does not and we get an exception on AQIC we must
>> + * guess that there is no vfio_ap_driver at all and no one
>> + * to handle the guests's CRYCB and the CRYCB is empty.
>> + */
>> + status.response_code = 0x01;
>
> I'm still confused here, sorry. From previous discussions I recall that
> this indicates "no crypto device" (please correct me if I'm wrong.)
>
> Before this patch, we had:
> - guest issues PQAP/AQIC -> drop to userspace
>
> With a correct implementation, we get:
> - guest issues PQAP/AQIC -> callback does what needs to be done
>
> With an incorrect implementation (no callback), we get:
> - guest issues PQAP/AQIC -> guest gets response code 0x01
>
> Why not drop to userspace in that case?

This is what I had in the previous patches.
Hum, I do not remember which discussion lead me to modify this.

Anyway, now that you put the finger on this problem, I think the problem
is worse.

The behavior with old / new Linux, vfio driver and qemu is:

LINUX VFIO_AP QEMU PGM
OLD x x OPERATION
NEW - OLD SPECIFICATION
NEW - NEW/aqic=off SPECIFICATION
NEW x NEW/aqic=on -

x = whatever
- = absent/none

So yes there is a change in behavior for the userland for the case QEMU
do not set the AQIC facility 65, OLD QEMU or NEW QEMU wanting to behave
like an older one.

I fear we have the same problem with the privileged operation...

For the last case, when the kvm_facility(65) is set, the explication is
the following:

This is related to the handling of PQAP AQIC which is now authorized by
this patch series.
If we authorize PQAP AQIC, by setting the bit for facility 65, the guest
can use this instruction.
If the instruction follows the specifications we must answer something
realistic and since there is nothing in the CRYCB (no driver) we answer
that there is no queue.

Conclusion: we must handle this in userland, it will have the benefit
to keep old behavior when there is no callback.
OLD QEMU will not see change as they will not set aqic facility
NEW QEMU will handle this correctly.

In this case we also do not need to handle all other tests here but can
move it to the callback as Tony wanted.

Would you agree with something simple like:

static int handle_pqap(struct kvm_vcpu *vcpu)
{
int ret = -EOPNOTSUPP;

/* Verify that the hook callback is registered and call it */
if (pqap_hook)
if (try_module_get(pqap_hook->owner)) {
ret = pqap_hook->hook(vcpu);
module_put(pqap_hook->owner);
}
return ret;
}

All other tests in QEMU and in the callback.

Thanks for the comments.

Regards,
Pierre

--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany

\
 
 \ /
  Last update: 2019-03-15 14:27    [W:0.366 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site