lkml.org 
[lkml]   [2019]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V4 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel
Date
> From: Anson Huang
>
> On i.MX8QXP, SCU uses MU1 general interrupt channel #3 to notify user for
> IRQs of RTC alarm, thermal alarm and WDOG etc., mailbox RX doorbell mode is
> used for this function, this patch adds support for it.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V3:
> - rename "gi3" to "gip3";
> - add alias for getting mu id by driver.
> ---
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 4c3dd95..f0a9224 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -21,6 +21,7 @@
> mmc1 = &usdhc2;
> mmc2 = &usdhc3;
> serial0 = &adma_lpuart0;
> + mu1 = &lsio_mu1;

Need add aliase in binding doc.

Otherwise:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng

\
 
 \ /
  Last update: 2019-03-15 12:07    [W:0.056 / U:27.700 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site