lkml.org 
[lkml]   [2019]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2] PCI: qcom: Use default config space read function
From
Date
On 14/03/2019 12:10, Srinivas Kandagatla wrote:

> Here is the output: https://paste.ubuntu.com/p/kFWZ4kXCxT/

Could you test the following patch:
And report boot log as well as output of lspci -vv ?

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 45ff5e4f8af6..aca656eff8ca 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -727,7 +727,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
/* Enable write permission for the DBI read-only register */
dw_pcie_dbi_ro_wr_en(pci);
/* Program correct class for RC */
+ dw_pcie_rd_own_conf(pp, PCI_CLASS_REVISION, 4, &val);
+ printk("\tBEFORE: CLASS/REV=%08x\n", val);
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
+ dw_pcie_rd_own_conf(pp, PCI_CLASS_REVISION, 4, &val);
+ printk("\t AFTER: CLASS/REV=%08x\n", val);
/* Better disable write permission right after the update */
dw_pcie_dbi_ro_wr_dis(pci);

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index d185ea5fe996..c5e16f9aaf44 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
return ret;
}

-static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
- u32 *val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-
- /* the device class is not reported correctly from the register */
- if (where == PCI_CLASS_REVISION && size == 4) {
- *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
- *val &= 0xff; /* keep revision id */
- *val |= PCI_CLASS_BRIDGE_PCI << 16;
- return PCIBIOS_SUCCESSFUL;
- }
-
- return dw_pcie_read(pci->dbi_base + where, size, val);
-}
-
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
.host_init = qcom_pcie_host_init,
- .rd_own_conf = qcom_pcie_rd_own_conf,
};

/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -1299,6 +1282,13 @@ static int qcom_pcie_probe(struct platform_device *pdev)
return ret;
}

+static void qcom_fixup_class(struct pci_dev *dev)
+{
+ printk("\tAPPLYING %s\n", __func__);
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); // 8064
+
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
\
 
 \ /
  Last update: 2019-03-14 14:19    [W:1.185 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site