lkml.org 
[lkml]   [2019]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] mtd: Fixes for 5.0-rc6
Hello Linus,

Here is the MTD fixes PR for 5.0-rc6.

Regards,

Boris

The following changes since commit 49a57857aeea06ca831043acbb0fa5e0f50602fd:

Linux 5.0-rc3 (2019-01-21 13:14:44 +1300)

are available in the Git repository at:

git://git.infradead.org/linux-mtd.git tags/mtd/fixes-for-5.0-rc6

for you to fetch changes up to d5d27fd9826b59979b184ec288e4812abac0e988:

mtd: rawnand: gpmi: fix MX28 bus master lockup problem (2019-02-06 09:39:22 +0100)

----------------------------------------------------------------
- Fix a problem with the imx28 ECC engine
- Remove a debug trace introduced in 2b6f0090a333 ("mtd: Check
add_mtd_device() ret code")
- Make sure partitions of size 0 can be registered
- Fix kernel-doc warning in the rawnand core
- Fix the error path of spinand_init() (missing manufacturer cleanup
in a few places)
- Address a problem with the SPI NAND PROGRAM LOAD operation which
does not work as expected on some parts.

----------------------------------------------------------------
Boris Brezillon (4):
mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache
mtd: spinand: Fix the error/cleanup path in spinand_init()
mtd: Remove a debug trace in mtdpart.c
mtd: Make sure mtd->erasesize is valid even if the partition is of size 0

Martin Kepplinger (1):
mtd: rawnand: gpmi: fix MX28 bus master lockup problem

Randy Dunlap (1):
mtd: rawnand: fix kernel-doc warnings

drivers/mtd/mtdpart.c | 5 ++++-
drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 13 ++++++-------
drivers/mtd/nand/raw/nand_base.c | 1 +
drivers/mtd/nand/raw/nand_bbt.c | 2 +-
drivers/mtd/nand/spi/core.c | 46 ++++++++++++++++++++++------------------------
5 files changed, 34 insertions(+), 33 deletions(-)

\
 
 \ /
  Last update: 2019-02-09 11:15    [W:6.380 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site