lkml.org 
[lkml]   [2019]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 00/16] Remove nested TPM operations
From
Date
On 2/7/19 7:33 PM, Jarkko Sakkinen wrote:
> On Thu, Feb 07, 2019 at 06:29:43PM -0500, Stefan Berger wrote:
>> On 2/7/19 4:29 PM, Jarkko Sakkinen wrote:
>>> On Thu, Feb 07, 2019 at 07:41:56PM +0100, Alexander Steffen wrote:
>>>> On 06.02.2019 13:06, Jarkko Sakkinen wrote:
>>>>> On Wed, Feb 06, 2019 at 12:47:07AM +0200, Jarkko Sakkinen wrote:
>>>>>> Make the changes necessary to detach TPM space code and TPM activation
>>>>>> code out of the tpm_transmit() flow because of both of these can cause
>>>>>> nested tpm_transmit() calls. The nesteds calls make the whole flow hard
>>>>>> to maintain, and thus, it is better to just fix things now before this
>>>>>> turns into a bigger mess.
>>>>>>
>>>>>> v11:
>>>>>> * Drop the patch that tries to flush TPM space on system. Not a proper
>>>>>> fallback + out of scope for this patch set.
>>>>>>
>>>>>> v10:
>>>>>> * Use void pointers to avoid unnecessary casts in functions paramaters
>>>>>> where it makes sense.
>>>>>>
>>>>>> v9:
>>>>>> * Fixed again tpm_try_get_ops().
>>>>>> * Added missing reviewed-by's.
>>>>>>
>>>>>> v8:
>>>>>> * Re-add the check for ret < 0 after calling tpm_try_transmit() that
>>>>>> was dropped by mistake while moving code.
>>>>>> * Fix error fallback for tpm_try_get_ops() when tpm_chip_start()
>>>>>> fails.
>>>>>>
>>>>>> v7:
>>>>>> * Reorganize series so that more trivial and self-contained changes are
>>>>>> in the head.
>>>>>>
>>>>>> v6:
>>>>>> * When tpm_validate_commmand() was moved to tpm2-space.c, the struct for
>>>>>> the TPM header was incorrectly declared as struct tpm_input_header.
>>>>>> * Fix return value in tpm_validate_command().
>>>>>>
>>>>>> v5:
>>>>>> * Add the missing rev's from Stefan Berger.
>>>>>>
>>>>>> v4:
>>>>>> * Return 0 from pcrs_show() when tpm1_pcr_read() fails.
>>>>>> * Fix error handling flow in tpm_try_transmit().
>>>>>> * Replace struct tpm_input_header and struct tpm_output_header with
>>>>>> struct tpm_header.
>>>>>>
>>>>>> v3:
>>>>>> * Encapsulate power gating code to tpm_chip_start() and tpm_chip_stop().
>>>>>> * Move TPM power gating code and locking to tpm_try_get_ops() and
>>>>>> tpm_put_ops().
>>>>>> * Call power gating code directly in tpm_chip_register() and
>>>>>> tpm2_del_space().
>>>>>>
>>>>>> v2:
>>>>>> * Print tpm2_commit_space() error inside tpm2_commit_space()
>>>>>> * Error code was not printed when recv() callback failed. It is
>>>>>> fixed in this version.
>>>>>> * Added a patch that removes @space from tpm_transmit().
>>>>>> * Fixed a regression in earlier series. Forgot to amend the change
>>>>>> from the staging area that renames NESTED to UNLOCKED in tpm2-space.c.
>>>>>>
>>>>>> Jarkko Sakkinen (16):
>>>>>> tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameter
>>>>>> tpm: fix invalid return value in pubek_show()
>>>>>> tpm: return 0 from pcrs_show() when tpm1_pcr_read() fails
>>>>>> tpm: print tpm2_commit_space() error inside tpm2_commit_space()
>>>>>> tpm: declare struct tpm_header
>>>>>> tpm: access command header through struct in tpm_try_transmit()
>>>>>> tpm: encapsulate tpm_dev_transmit()
>>>>>> tpm: clean up tpm_try_transmit() error handling flow
>>>>>> tpm: move tpm_validate_commmand() to tpm2-space.c
>>>>>> tpm: move TPM space code out of tpm_transmit()
>>>>>> tpm: remove @space from tpm_transmit()
>>>>>> tpm: use tpm_try_get_ops() in tpm-sysfs.c.
>>>>>> tpm: remove TPM_TRANSMIT_UNLOCKED flag
>>>>>> tpm: introduce tpm_chip_start() and tpm_chip_stop()
>>>>>> tpm: take TPM chip power gating out of tpm_transmit()
>>>>>> tpm: remove @flags from tpm_transmit()
>>>>>>
>>>>>> drivers/char/tpm/tpm-chip.c | 109 ++++++++++++
>>>>>> drivers/char/tpm/tpm-dev-common.c | 44 ++++-
>>>>>> drivers/char/tpm/tpm-interface.c | 264 ++++++------------------------
>>>>>> drivers/char/tpm/tpm-sysfs.c | 138 ++++++++++------
>>>>>> drivers/char/tpm/tpm.h | 64 +++-----
>>>>>> drivers/char/tpm/tpm1-cmd.c | 28 +---
>>>>>> drivers/char/tpm/tpm2-cmd.c | 72 +++-----
>>>>>> drivers/char/tpm/tpm2-space.c | 91 +++++++---
>>>>>> drivers/char/tpm/tpm_i2c_atmel.c | 5 +-
>>>>>> drivers/char/tpm/tpm_vtpm_proxy.c | 12 +-
>>>>>> drivers/char/tpm/xen-tpmfront.c | 2 +-
>>>>>> 11 files changed, 408 insertions(+), 421 deletions(-)
>>>>>>
>>>>>> --
>>>>>> 2.19.1
>>>>>>
>>>>> Applied to master and next.
>>>> Something in this series seems to break basic TPM communication for me.
>>>>
>>>> For TPM2.0s the probe command fails, causing them to be misdetected as
>>>> TPM1.2s:
>>>>
>>>> ---
>>>> tpm tpm0: tpm_try_transmit: tpm_send: error -5
>>>> tpm_tis MSFT0101:00: 1.2 TPM (device-id 0x1A, rev-id 22)
>>>> tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts
>>>> ---
>>>> tpm tpm0: tpm_try_transmit: tpm_send: error -5
>>>> tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 22)
>>>> tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts
>>>> ---
>>>>
>>>> And for something that actually is a TPM1.2 it fails in a similar way:
>>>>
>>>> ---
>>>> tpm_i2c_infineon 1-0020: 1.2 TPM (device-id 0x1A)
>>>> tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts
>>>> ---
>>>> tpm tpm0: tpm_try_transmit: tpm_send: error -5
>>>> tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 16)
>>>> tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts
>>>> tpm_tis_spi: probe of spi0.1 failed with error -14
>>>> ---
>>>>
>>>> I see this problem across my entire range of TPM devices and test platforms.
>>>> Any idea what could be wrong here?
>>> Weird.
>>>
>>> Can you run a bisect?
>> There are 2 bugs and the following overall patch against your tree fixes
>> them. Let me comment on the individual patches in v17. I missed those
>> obviously when testing with the tpm_vtpm_proxy...
>>
>>
>>
>> diff --git a/drivers/char/tpm/tpm-interface.c
>> b/drivers/char/tpm/tpm-interface.c
>> index 02e8cffd1163..34c0da55d885 100644
>> --- a/drivers/char/tpm/tpm-interface.c
>> +++ b/drivers/char/tpm/tpm-interface.c
>> @@ -94,6 +94,7 @@ static ssize_t tpm_try_transmit(struct tpm_chip *chip,
>> void *buf, size_t bufsiz)
>>          return rc;
>>      }
>>
>> +    rc = 0;
>>      if (chip->flags & TPM_CHIP_FLAG_IRQ)
>>          goto out_recv;
> What why?


This fix seems to only be necessary when bisecting. You may want to
apply it!


>
>> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
>> index e74c5b7b64bf..52afe20cc8a1 100644
>> --- a/drivers/char/tpm/tpm2-cmd.c
>> +++ b/drivers/char/tpm/tpm2-cmd.c
>> @@ -799,7 +799,9 @@ int tpm2_probe(struct tpm_chip *chip)
>>      tpm_buf_append_u32(&buf, TPM2_CAP_TPM_PROPERTIES);
>>      tpm_buf_append_u32(&buf, TPM_PT_TOTAL_COMMANDS);
>>      tpm_buf_append_u32(&buf, 1);
>> +    tpm_chip_start(chip);
>>      rc = tpm_transmit_cmd(chip, &buf, 0, NULL);
>> +    tpm_chip_stop(chip);
> Thanks Stefan! I added call to tpm_tis_core as tpm2-cmd.c is to be kept
> out of chip management common case being that you call tpm_try_get_ops(),
> do 1-N TPM commands and release with tpm_put_ops(). These functions take
> care starting and stopping the chip.
>
> I fixed the 2nd issue in the master.

You also need to export the tpm_chip_start/stop symbols.


Master now seems to (still) have a problem when rmmod'ing:

A TPM error (325) occurred stopping the TPM. This happens at the same
patch where I had to add the tpm_chip_start/stop above.




>
> /Jarkko
>

\
 
 \ /
  Last update: 2019-02-08 02:52    [W:0.096 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site