lkml.org 
[lkml]   [2019]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/28] thunderbolt: Add dummy read after port capability list walk on Light Ridge
Date
Light Ridge has an issue where reading the next capability pointer
location in port config space the read data is not cleared. It is fine
to read capabilities each after another so only thing we need to do is
to make sure we issue dummy read after tb_port_find_cap() is finished to
avoid the issue in next read.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/cap.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/drivers/thunderbolt/cap.c b/drivers/thunderbolt/cap.c
index 0de548bda663..8aceb0d97a63 100644
--- a/drivers/thunderbolt/cap.c
+++ b/drivers/thunderbolt/cap.c
@@ -57,6 +57,21 @@ static int tb_port_enable_tmu(struct tb_port *port, bool enable)
return tb_sw_write(sw, &value, TB_CFG_SWITCH, offset, 1);
}

+static void tb_port_dummy_read(struct tb_port *port)
+{
+ /*
+ * When reading from next capability pointer location in port
+ * config space the read data is not cleared on LR. To avoid
+ * reading stale data on next read perform one dummy read after
+ * port capabilities are walked.
+ */
+ if (port->sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE) {
+ u32 dummy;
+
+ tb_port_read(port, &dummy, TB_CFG_PORT, 0, 1);
+ }
+}
+
static int __tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap)
{
u32 offset = 1;
@@ -97,6 +112,7 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap)

ret = __tb_port_find_cap(port, cap);

+ tb_port_dummy_read(port);
tb_port_enable_tmu(port, false);

return ret;
--
2.20.1
\
 
 \ /
  Last update: 2019-02-06 14:18    [W:0.144 / U:5.944 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site