[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v1 1/4] clk: qcom: smd: Add XO clock for MSM8998
On 2/5/2019 3:01 PM, Stephen Boyd wrote:
> Quoting Jeffrey Hugo (2019-01-30 08:35:44)
>> The XO clock generally feeds into other clock controllers as the parent
>> for a lot of clock generators.
>> Fixes: 6131dc81211c (clk: qcom: smd: Add support for MSM8998 rpm clocks)
>> Signed-off-by: Jeffrey Hugo <>
> We've historically left out the XO clk because it causes problems where
> the XO vote goes away during late init because nobody references it from
> the rest of the clk tree and also because RPM defers probe of the system
> and then the console blows up when it gets a clk that can't change rate.
> See commit 54823af9cd52 ("clk: qcom: Always add factor clock for xo
> clocks") for some more info on why we removed all the workarounds and
> stuff around here too.
> So are you sure this is OK to do?

So, I've got pretty much everything as modules, and I haven't seen any
issues. However let me take a look at the commit you point out and see.

Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

 \ /
  Last update: 2019-02-05 23:15    [W:0.118 / U:3.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site