lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels
Hey Mani,

thanks for sending this out, it should have been just like that in the
first place ;)

On Fri, Dec 21, 2018 at 3:36 AM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> On Mon, Oct 29, 2018 at 03:12:45PM +0530, Manivannan Sadhasivam wrote:
> > For all 96Boards, the following standard is used for onboard LEDs.
> >
> > green:user1 default-trigger: heartbeat
> > green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
> > green:user3 default-trigger: mmc1 (SD-card)
> > green:user4 default-trigger: none, panic-indicator
> > yellow:wlan default-trigger: phy0tx
> > blue:bt default-trigger: hci0-power
> >
> > So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> > one of the 96Boards CE platform.
> >
>
> Hello,
>
> Any update on this patch?

Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>

>
> Regards,
> Mani
>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > index 46feedf7c989..35f95154316b 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > @@ -300,28 +300,28 @@
> > compatible = "gpio-leds";
> >
> > led@1 {
> > - label = "apq8016-sbc:green:user1";
> > + label = "green:user1";
> > gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "heartbeat";
> > default-state = "off";
> > };
> >
> > led@2 {
> > - label = "apq8016-sbc:green:user2";
> > + label = "green:user2";
> > gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "mmc0";
> > default-state = "off";
> > };
> >
> > led@3 {
> > - label = "apq8016-sbc:green:user3";
> > + label = "green:user3";
> > gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "mmc1";
> > default-state = "off";
> > };
> >
> > led@4 {
> > - label = "apq8016-sbc:green:user4";
> > + label = "green:user4";
> > gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "none";
> > panic-indicator;
> > @@ -329,14 +329,14 @@
> > };
> >
> > led@5 {
> > - label = "apq8016-sbc:yellow:wlan";
> > + label = "yellow:wlan";
> > gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "phy0tx";
> > default-state = "off";
> > };
> >
> > led@6 {
> > - label = "apq8016-sbc:blue:bt";
> > + label = "blue:bt";
> > gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
> > linux,default-trigger = "bluetooth-power";
> > default-state = "off";
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2019-02-05 20:01    [W:0.093 / U:2.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site