lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
From
Date
On 04/02/19 20:15, Tony Lindgren wrote:
> * Roger Quadros <rogerq@ti.com> [190204 14:23]:
>> From: "Andrew F. Davis" <afd@ti.com>
>>
>> The Programmable Real-Time Unit Subsystem (PRUSS) contains an
>> interrupt controller (INTC) that can handle various system input
>> events and post interrupts back to the device-level initiators.
>> The INTC can support upto 64 input events with individual control
>> configuration and hardware prioritization. These events are mapped
>> onto 10 interrupt signals through two levels of many-to-one mapping
>> support. Different interrupt signals are routed to the individual
>> PRU cores or to the host CPU.
>>
>> The PRUSS INTC platform driver manages this PRUSS interrupt
>> controller and implements an irqchip driver to provide a Linux
>> standard way for the PRU client users to enable/disable/ack/
>> re-trigger a PRUSS system event. The system events to interrupt
>> channels and host interrupts relies on the mapping configuration
>> provided through a firmware resource table for now. This will be
>> revisited and enhanced in the future for a better interface. The
>> mappings will currently be programmed during the boot/shutdown
>> of the PRU.
>>
>> The PRUSS INTC module is reference counted during the interrupt
>> setup phase through the irqchip's irq_request_resources() and
>> irq_release_resources() ops. This restricts the module from being
>> removed as long as there are active interrupt users.
>>
>> The PRUSS INTC can generate an interrupt to various processor
>> subsystems on the SoC through a set of 64 possible PRU system
>> events. These system events can be used by PRU client drivers
>> or applications for event notifications/signalling between PRUs
>> and MPU or other processors. An API, pruss_intc_trigger() is
>> provided to MPU-side PRU client drivers/applications to be able
>> to trigger an event/interrupt using IRQ numbers provided by the
>> PRUSS-INTC irqdomain chip.
>
> I suggest you send the binding patch and the interrupt
> controller driver separately to the irqchip guys. Maybe
> put the trigger function in to a separate patch that can
> be reviewed and applied separately.

Good idea. I will send irqchip related patches separately.

cheers,
-roger
>
> Regards,
>
> Tony
>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-02-05 11:37    [W:0.160 / U:4.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site