[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] Add STM32MP157 discovery boards support
This patch series add support of two new discovery boards based on
STM32MP157 MPU: stm32mp157a-dk1 and stm32mp157c-dk2.

stm32mp157a-dk1 board embeds a STM32MP157a SOC with AC package (TFBGA361,
148 ios) and 512MB of DDR3. Several connections are available on this boards:
4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

stm32mp157c-dk2 board complements stm32mp157a-dk1 board with a display panel
(otm8009a) and a Murata Wifi/BT combo. It embeds a STM32MP157c SOC with AC

Those patches enable basic support for a kernel boot.


Alexandre Torgue (2):
ARM: dts: stm32: add initial support of stm32mp157a-dk1 board
ARM: dts: stm32: add initial support of stm32mp157c-dk2 board

arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/stm32mp157a-dk1.dts | 77 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-dk2.dts | 75 ++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2.dts


 \ /
  Last update: 2019-02-05 10:08    [W:0.097 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site