lkml.org 
[lkml]   [2019]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/7] thermal: mediatek: add calibration item
From
Date


On 01/02/2019 08:38, michael.kao@mediatek.com wrote:
> From: Michael Kao <michael.kao@mediatek.com>
>
> Add calibration item in thermal_data to support
> the project with different calibration coefficient.
>
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
> drivers/thermal/mtk_thermal.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 07f8ad7..45c6587 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -105,6 +105,9 @@
> /* The number of sensing points per bank */
> #define MT8173_NUM_SENSORS_PER_ZONE 4
>
> +/* The calibration coefficient of sensor */
> +#define MT8173_CALIBRATION 165
> +

Calibration value is the same for all SoCs (including mt8183), we can define it
once and use it in all mtk_thermal structs.

Regards,
Matthias


> /*
> * Layout of the fuses providing the calibration data
> * These macros could be used for MT8173, MT2701, and MT2712.
> @@ -147,6 +150,9 @@ enum {
> /* The number of sensing points per bank */
> #define MT2701_NUM_SENSORS_PER_ZONE 3
>
> +/* The calibration coefficient of sensor */
> +#define MT2701_CALIBRATION 165
> +
> /* MT2712 thermal sensors */
> #define MT2712_TS1 0
> #define MT2712_TS2 1
> @@ -162,12 +168,18 @@ enum {
> /* The number of sensing points per bank */
> #define MT2712_NUM_SENSORS_PER_ZONE 4
>
> +/* The calibration coefficient of sensor */
> +#define MT2712_CALIBRATION 165
> +
> #define MT7622_TEMP_AUXADC_CHANNEL 11
> #define MT7622_NUM_SENSORS 1
> #define MT7622_NUM_ZONES 1
> #define MT7622_NUM_SENSORS_PER_ZONE 1
> #define MT7622_TS1 0
>
> +/* The calibration coefficient of sensor */
> +#define MT7622_CALIBRATION 165
> +
> struct mtk_thermal;
>
> struct thermal_bank_cfg {
> @@ -188,6 +200,7 @@ struct mtk_thermal_data {
> const int *sensor_mux_values;
> const int *msr;
> const int *adcpnp;
> + const int cali_val;
> struct thermal_bank_cfg bank_data[];
> };
>
> @@ -295,6 +308,7 @@ struct mtk_thermal {
> .num_banks = MT8173_NUM_ZONES,
> .num_sensors = MT8173_NUM_SENSORS,
> .vts_index = mt8173_vts_index,
> + .cali_val = MT8173_CALIBRATION,
> .bank_data = {
> {
> .num_sensors = 2,
> @@ -330,6 +344,7 @@ struct mtk_thermal {
> .num_banks = 1,
> .num_sensors = MT2701_NUM_SENSORS,
> .vts_index = mt2701_vts_index,
> + .cali_val = MT2701_CALIBRATION,
> .bank_data = {
> {
> .num_sensors = 3,
> @@ -356,6 +371,7 @@ struct mtk_thermal {
> .num_banks = 1,
> .num_sensors = MT2712_NUM_SENSORS,
> .vts_index = mt2712_vts_index,
> + .cali_val = MT2712_CALIBRATION,
> .bank_data = {
> {
> .num_sensors = 4,
> @@ -376,6 +392,7 @@ struct mtk_thermal {
> .num_banks = MT7622_NUM_ZONES,
> .num_sensors = MT7622_NUM_SENSORS,
> .vts_index = mt7622_vts_index,
> + .cali_val = MT7622_CALIBRATION,
> .bank_data = {
> {
> .num_sensors = 1,
> @@ -402,7 +419,7 @@ static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
> raw &= 0xfff;
>
> tmp = 203450520 << 3;
> - tmp /= 165 + mt->o_slope;
> + tmp /= mt->conf->cali_val + mt->o_slope;
> tmp /= 10000 + mt->adc_ge;
> tmp *= raw - mt->vts[sensno] - 3350;
> tmp >>= 3;
>

\
 
 \ /
  Last update: 2019-02-04 18:32    [W:0.496 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site