lkml.org 
[lkml]   [2019]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
Hi Anand,

On Tue, Jan 29, 2019 at 11:25 AM Anand Moon <linux.amoon@gmail.com> wrote:
>
> Add missing vin-supply node 5.0V regulator setting to power
> to usb ports, changes help fix the usb reset warning.
>
> [ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
>
> Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> changes from prevoius
>
> regulator use open bypass opmode voltage current min max
> ---------------------------------------------------------------------------------------
> regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
> c9100000.usb 1 0mA 0mV 0mV
> c9100000.usb 1 0mA 0mV 0mV
> c9000000.usb 1 0mA 0mV 0mV
> c9000000.usb 1 0mA 0mV 0mV
> P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
> USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
> phy-c0000020.phy.1 2 0mA 0mV 0mV
> phy-c0000000.phy.0 2 0mA 0mV 0mV
> --
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 2e1cd5e3a246..da729ed00408 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -28,6 +28,13 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + p5v0: regulator-p5v0 {
> + compatible = "regulator-fixed";
> + regulator-name = "P5V0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> usb_otg_pwr: regulator-usb-pwrs {
> compatible = "regulator-fixed";
>
> @@ -36,6 +43,8 @@
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
>
> + vin-supply = <&p5v0>;
did you find out why this patch fixes the USB_OTG_PWR regulator?
based on just reading the patch I can't find an explanation myself

have you tested without this patch to rule out that you hit some bug
in the regulator framework back when you wrote the patch?
(I don't have an Odroid-C2 so I can't test this myself).


Regards
Martin

\
 
 \ /
  Last update: 2019-02-04 14:59    [W:0.092 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site