Messages in this thread Patch in this message | | | From | Marek Behún <> | Subject | [PATCH v3 bus+gpio 5/5] dt-bindings: gpio: Document GPIOs via Moxtet bus | Date | Fri, 1 Mar 2019 04:58:52 +0100 |
| |
This patch adds documentation of the device tree bindings for GPIOs on the devices connected via Moxtet bus.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/gpio/gpio-moxtet.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt new file mode 100644 index 000000000000..410759de9f09 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt @@ -0,0 +1,18 @@ +Turris Mox Moxtet GPIO expander via Moxtet bus + +Required properties: + - compatible : Should be "cznic,moxtet-gpio". + - gpio-controller : Marks the device node as a GPIO controller. + - #gpio-cells : Should be two. For consumer use see gpio.txt. + +Other properties are required for a Moxtet bus device, please refer to +Documentation/devicetree/bindings/bus/moxtet.txt. + +Example: + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + } -- 2.19.2
| |