lkml.org 
[lkml]   [2019]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V4 1/2] watchdog: imx_sc: Add i.MX system controller watchdog support
Date
Hi, Guenter

Best Regards!
Anson Huang

> -----Original Message-----
> From: Guenter Roeck [mailto:groeck7@gmail.com] On Behalf Of Guenter
> Roeck
> Sent: 2019年2月28日 22:58
> To: Anson Huang <anson.huang@nxp.com>; catalin.marinas@arm.com;
> will.deacon@arm.com; wim@linux-watchdog.org; shawnguo@kernel.org;
> s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com;
> Andy Gross <andy.gross@linaro.org>; heiko@sntech.de;
> horms+renesas@verge.net.au; arnd@arndb.de; olof@lixom.net;
> jagan@amarulasolutions.com; bjorn.andersson@linaro.org;
> enric.balletbo@collabora.com; marc.w.gonzalez@free.fr; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; linux-
> watchdog@vger.kernel.org
> Cc: dl-linux-imx <linux-imx@nxp.com>
> Subject: Re: [PATCH V4 1/2] watchdog: imx_sc: Add i.MX system controller
> watchdog support
>
> On 2/27/19 11:59 PM, Anson Huang wrote:
> > i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
> > inside, the system controller is in charge of controlling power, clock
> > and watchdog etc..
> >
> > This patch adds i.MX system controller watchdog driver support,
> > watchdog operation needs to be done in secure EL3 mode via
> > ARM-Trusted-Firmware, using SMC call, CPU will trap into
> > ARM-Trusted-Firmware and then it will request system controller to do
> > watchdog operation via IPC.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V3:
> > - add ARM64 dependency for this driver;
> > - change SPDX license to GPL-2.0 to match module license;
> > - register platform device in driver instead of getting from dts;
> > - return linux error code instead of system controller firmware error
> code for watchdog operation
> > failed case.
> > ---
> > drivers/watchdog/Kconfig | 13 +++
> > drivers/watchdog/Makefile | 1 +
> > drivers/watchdog/imx_sc_wdt.c | 201
> ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 215 insertions(+)
> > create mode 100644 drivers/watchdog/imx_sc_wdt.c
> >
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> > 65c3c42..8c6575e 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -625,6 +625,19 @@ config IMX2_WDT
> > To compile this driver as a module, choose M here: the
> > module will be called imx2_wdt.
> >
> > +config IMX_SC_WDT
> > + tristate "IMX SC Watchdog"
> > + depends on (ARCH_MXC && ARM64) || COMPILE_TEST
> > + select WATCHDOG_CORE
> > + help
> > + This is the driver for the system controller watchdog
> > + on the NXP i.MX SoCs with system controller inside.
> > + If you have one of these processors and wish to have
> > + watchdog support enabled, say Y, otherwise say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called imx_sc_wdt.
> > +
>
> With this patch applied, alpha:allmodconfig and almost all other
> allmodconfig/allyesconfig builds fail with:
>
> ERROR: "__arm_smccc_smc" [drivers/watchdog/imx_sc_wdt.ko] undefined!
> scripts/Makefile.modpost:92: recipe for target '__modpost' failed
> make[1]: *** [__modpost] Error 1
> Makefile:1260: recipe for target 'modules' failed
>
> as I told you before would happen. For the future, please consider that
> forcing me to "prove" such failures does take a significant amount of time,
> which is not always readily available.

Sorry for wasting your time, it is just because I misunderstand your point, NOT
that I did NOT force you to prove it.

I am a little confuse, since this is new to me about these configs, I looked into
other drivers which also use arm_smccc_smc, they do NOT add special config
dependency for the failure build cause as you said, can you be more detail about
this build issue, I tried below build, but the failure I met is other, so could you please
advise how to fix such dependency issue, adding dummy function looks like NOT
a good way since this arm_smccc_smc() API is widely used in kernel, there should be
some common solution for it, Thanks in advanced and appreciate for your time.

Anson.

anson@anson-OptiPlex-790:~/workspace/stash/linux-next$ make.cross ARCH=arm64 allyesconfig
anson@anson-OptiPlex-790:~/workspace/stash/linux-next$ make.cross ARCH=arm64

arch/arm64/kernel/traps.o: In function `early_brk64':
traps.c:(.init.text+0x24): relocation truncated to fit: R_AARCH64_CALL26 against `.text'
arch/arm64/kernel/entry.o:(.altinstr_replacement+0x70): relocation truncated to fit: R_AARCH64_JUMP26 against `.entry.text'
arch/arm64/kernel/entry.o:(.altinstr_replacement+0x84): relocation truncated to fit: R_AARCH64_JUMP26 against `.entry.text'
arch/arm64/kernel/entry.o:(.altinstr_replacement+0x98): relocation truncated to fit: R_AARCH64_JUMP26 against `.entry.text'


>
> Guenter
>
>
> > config UX500_WATCHDOG
> > tristate "ST-Ericsson Ux500 watchdog"
> > depends on MFD_DB8500_PRCMU
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index 4e78a8c..0c9da63 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) +=
> nuc900_wdt.o
> > obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
> > obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
> > obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
> > +obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
> > obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
> > obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
> > obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o diff --git
> > a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c new
> > file mode 100644 index 0000000..50b49b2
> > --- /dev/null
> > +++ b/drivers/watchdog/imx_sc_wdt.c
> > @@ -0,0 +1,201 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2018-2019 NXP.
> > + */
> > +
> > +#include <linux/arm-smccc.h>
> > +#include <linux/io.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/moduleparam.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reboot.h>
> > +#include <linux/watchdog.h>
> > +
> > +#define DEFAULT_TIMEOUT 60
> > +/*
> > + * Software timer tick implemented in scfw side, support 10ms to
> > +0xffffffff ms
> > + * in theory, but for normal case, 1s~128s is enough, you can change
> > +this max
> > + * value in case it's not enough.
> > + */
> > +#define MAX_TIMEOUT 128
> > +
> > +#define IMX_SIP_TIMER 0xC2000002
> > +#define IMX_SIP_TIMER_START_WDOG 0x01
> > +#define IMX_SIP_TIMER_STOP_WDOG 0x02
> > +#define IMX_SIP_TIMER_SET_WDOG_ACT 0x03
> > +#define IMX_SIP_TIMER_PING_WDOG 0x04
> > +#define IMX_SIP_TIMER_SET_TIMEOUT_WDOG 0x05
> > +#define IMX_SIP_TIMER_GET_WDOG_STAT 0x06
> > +#define IMX_SIP_TIMER_SET_PRETIME_WDOG 0x07
> > +
> > +#define SC_TIMER_WDOG_ACTION_PARTITION 0
> > +
> > +static bool nowayout = WATCHDOG_NOWAYOUT;
> module_param(nowayout,
> > +bool, 0000); MODULE_PARM_DESC(nowayout, "Watchdog cannot be
> stopped
> > +once started (default="
> > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> > +
> > +static unsigned int timeout = DEFAULT_TIMEOUT; module_param(timeout,
> > +uint, 0000); MODULE_PARM_DESC(timeout, "Watchdog timeout in
> seconds
> > +(default="
> > + __MODULE_STRING(DEFAULT_TIMEOUT) ")");
> > +
> > +static struct platform_device *imx_sc_wdt_pdev;
> > +
> > +static int imx_sc_wdt_ping(struct watchdog_device *wdog) {
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_PING_WDOG,
> > + 0, 0, 0, 0, 0, 0, &res);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_sc_wdt_start(struct watchdog_device *wdog) {
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_START_WDOG,
> > + 0, 0, 0, 0, 0, 0, &res);
> > + if (res.a0)
> > + return -EACCES;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_WDOG_ACT,
> > + SC_TIMER_WDOG_ACTION_PARTITION,
> > + 0, 0, 0, 0, 0, &res);
> > + return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static int imx_sc_wdt_stop(struct watchdog_device *wdog) {
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_STOP_WDOG,
> > + 0, 0, 0, 0, 0, 0, &res);
> > +
> > + return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
> > + unsigned int timeout)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + wdog->timeout = timeout;
> > + arm_smccc_smc(IMX_SIP_TIMER,
> IMX_SIP_TIMER_SET_TIMEOUT_WDOG,
> > + timeout * 1000, 0, 0, 0, 0, 0, &res);
> > +
> > + return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static const struct watchdog_ops imx_sc_wdt_ops = {
> > + .owner = THIS_MODULE,
> > + .start = imx_sc_wdt_start,
> > + .stop = imx_sc_wdt_stop,
> > + .ping = imx_sc_wdt_ping,
> > + .set_timeout = imx_sc_wdt_set_timeout, };
> > +
> > +static const struct watchdog_info imx_sc_wdt_info = {
> > + .identity = "i.MX SC watchdog timer",
> > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > + WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT, };
> > +
> > +static int imx_sc_wdt_probe(struct platform_device *pdev) {
> > + struct watchdog_device *imx_sc_wdd;
> > + int ret;
> > +
> > + imx_sc_wdd = devm_kzalloc(&pdev->dev, sizeof(*imx_sc_wdd),
> GFP_KERNEL);
> > + if (!imx_sc_wdd)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, imx_sc_wdd);
> > +
> > + imx_sc_wdd->info = &imx_sc_wdt_info;
> > + imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > + imx_sc_wdd->min_timeout = 1;
> > + imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > + imx_sc_wdd->parent = &pdev->dev;
> > + imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > +
> > + ret = watchdog_init_timeout(imx_sc_wdd, timeout, &pdev->dev);
> > + if (ret)
> > + dev_warn(&pdev->dev, "Failed to set timeout value, using
> > +default\n");
> > +
> > + watchdog_stop_on_reboot(imx_sc_wdd);
> > + watchdog_stop_on_unregister(imx_sc_wdd);
> > +
> > + ret = devm_watchdog_register_device(&pdev->dev, imx_sc_wdd);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to register watchdog device\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused imx_sc_wdt_suspend(struct device *dev) {
> > + struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > +
> > + if (watchdog_active(imx_sc_wdd))
> > + imx_sc_wdt_stop(imx_sc_wdd);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused imx_sc_wdt_resume(struct device *dev) {
> > + struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > +
> > + if (watchdog_active(imx_sc_wdd))
> > + imx_sc_wdt_start(imx_sc_wdd);
> > +
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(imx_sc_wdt_pm_ops,
> > + imx_sc_wdt_suspend, imx_sc_wdt_resume);
> > +
> > +static struct platform_driver imx_sc_wdt_driver = {
> > + .probe = imx_sc_wdt_probe,
> > + .driver = {
> > + .name = "imx-sc-wdt",
> > + .pm = &imx_sc_wdt_pm_ops,
> > + },
> > +};
> > +
> > +static int __init imx_sc_wdt_init(void) {
> > + int ret;
> > +
> > + ret = platform_driver_register(&imx_sc_wdt_driver);
> > + if (ret)
> > + return ret;
> > +
> > + imx_sc_wdt_pdev = platform_device_register_simple("imx-sc-wdt", -
> 1, NULL, 0);
> > + if (IS_ERR(imx_sc_wdt_pdev)) {
> > + platform_driver_unregister(&imx_sc_wdt_driver);
> > + return PTR_ERR(imx_sc_wdt_pdev);
> > + }
> > +
> > + return 0;
> > +}
> > +module_init(imx_sc_wdt_init);
> > +
> > +static void __exit imx_sc_wdt_exit(void) {
> > + platform_driver_unregister(&imx_sc_wdt_driver);
> > + platform_device_unregister(imx_sc_wdt_pdev);
> > +}
> > +module_exit(imx_sc_wdt_exit);
> > +
> > +MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>");
> > +MODULE_DESCRIPTION("NXP i.MX system controller watchdog driver");
> > +MODULE_LICENSE("GPL v2");
> >

\
 
 \ /
  Last update: 2019-03-01 04:48    [W:0.080 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site