lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v7 0/9] EDAC drivers for Armada XP L2 and DDR
Date
Hi Borislav, Russell,

This seems to have fallen off the radar. Is there anything stopping this
series from being merged?

On 22/11/18 1:12 PM, Chris Packham wrote:
> The current plan is for these to go in via the ARM tree once appropriate
> Reviews/Acks have been given
>
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-August/525561.html
>
> This series adds drivers for the L2 cache and DDR RAM ECC functionality as
> found on the MV78230/MV78x60 SoCs. Jan has tested these changes with the
> MV78460 (on a custom board with a DDR3 ECC DIMM), Chris has tested these
> changes with 88F6820 and 98dx3236 (both a custom boards with fixed DDR3 + ECC).
>
> Also contained in this series is an additional debugfs wrapper.
>
> Compared to the previous v6 series I've dropped the marvell,ecc-disable
> property.
>
> Compared to the previous v5 series I've split the dt-binding documentation into
> its own patch and updated armada_xp_edac.c to use a SPDX license.
>
> Compared to the previous v4 series I've added my s-o-b to some of Jan's
> patches and rebased against v4.19.0.
>
> Compared to the previous v3 series, the following changes have been made:
> - Use shorter names for the AURORA ECC and parity registers
> - Numerous formatting changes to edac/armada_xp.c (as requested by Boris)
> - Added support for Armada-38x and 98dx3236 SoCs
>
> Compared to the previous v2 series, the following changes have been made:
> - Allocate EDAC structures later during probing and drop devres support
> patches (requested by Boris)
> - Make drvdata->width usage consistent according to the comment (suggested by
> Chris)
>
> Compared to the previous v1 series, the following changes have been made:
> - Add the aurora-l2 register defines earlier in the series (suggested by
> Russell King and Gregory CLEMENT )
> - Changed the DT vendor prefix from "arm" to "marvell" for the ecc-enable/disable
> properties on the aurora-l2 (suggested by Russell King)
> - Fix some warnings reported by checkpatch
>
> Compared to the original RFC series, the following changes have been made:
> - Integrated Chris' patches for parity and ECC configuration via DT
> - Merged the DDR RAM and L2 cache drivers (as requested by Boris, analogous
> to fsl_ddr_edac.c and mpc85xx_edac.c)
> - Added myself to MAINTAINERS (requested by Boris)
> - L2 cache: Track the msg size and use snprintf (review comment by Chris)
> - L2 cache: Split error injection from the check function (review comment by
> Chris)
> - DDR RAM: Allow 16 bit width in addition to 32 and 64 bit (review comment by
> Chris)
> - Use of_match_ptr() (review comments by Chris)
> - Minor checkpatch cleanups
>
> Chris Packham (4):
> ARM: l2x0: support parity-enable/disable on aurora
> dt-bindings: ARM: document marvell,ecc-enable binding
> ARM: l2x0: add marvell,ecc-enable property for aurora
> EDAC: armada_xp: Add support for more SoCs
>
> Jan Luebbe (5):
> ARM: l2c: move cache-aurora-l2.h to asm/hardware
> ARM: aurora-l2: add prefix to MAX_RANGE_SIZE
> ARM: aurora-l2: add defines for parity and ECC registers
> EDAC: Add missing debugfs_create_x32 wrapper
> EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
>
> .../devicetree/bindings/arm/l2c2x0.txt | 1 +
> MAINTAINERS | 6 +
> .../asm/hardware}/cache-aurora-l2.h | 50 +-
> arch/arm/mm/cache-l2x0.c | 18 +-
> drivers/edac/Kconfig | 7 +
> drivers/edac/Makefile | 1 +
> drivers/edac/armada_xp_edac.c | 635 ++++++++++++++++++
> drivers/edac/debugfs.c | 11 +
> drivers/edac/edac_module.h | 5 +
> 9 files changed, 730 insertions(+), 4 deletions(-)
> rename arch/arm/{mm => include/asm/hardware}/cache-aurora-l2.h (50%)
> create mode 100644 drivers/edac/armada_xp_edac.c
>


\
 
 \ /
  Last update: 2019-02-27 21:07    [W:0.123 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site