lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] ARM: tegra: enforce PM requirement
On Tue, Feb 26, 2019 at 09:13:08AM +0000, Russell King - ARM Linux admin wrote:
> On Tue, Feb 26, 2019 at 01:55:37PM +0530, Sameer Pujar wrote:
> > The requirement for this came while adding runtime PM support for HDA
> > driver. There were concerns about driver explicitly handling !PM case.
> > In general, drivers need to handle !PM case with work arounds for
> > managing clocks and power explicitly, which is not really necessary
> > when PM support on tegra is in good shape. In fact ARM 64-bit Tegra
> > platforms enforce PM support and there is no reason why this cannot be
> > done for 32-bit.
> >
> > More details with regards to above can be found in following patch,
> > http://patchwork.ozlabs.org/patch/1036645/
> >
> > This patch selects PM unconditionally and drivers can rely on runtime
> > PM framework for clock and power management.
>
> What if the drivers are re-used on another SoC IP? Doesn't this lead
> to unexpected failures?

I suppose it would if the configuration doesn't enable PM. In practice I
don't think this happens very often. I'm also not aware of any of the IP
blocks in Tegra being reused on other SoCs, so I think the risk of this
happening isn't very high.

> If you want to do this, maybe also make those drivers depend on PM as
> well?

That said, I think adding the dependency on PM is good documentation and
would prevent the cases that you're describing from happening, so I'll
see to it that we get it added where needed.

I think all drivers currently support running without PM, but the code
to do it is cumbersome and highly repetitive. I think we can add the PM
dependency at the same time that we remove the !PM boilerplate.

Thierry

> > Signed-off-by: Sameer Pujar <spujar@nvidia.com>
> > Reviewed-by: Thierry Reding <treding@nvidia.com>
> > Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
> > ---
> > arch/arm/mach-tegra/Kconfig | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> > index 7f3b83e..51a8fa3 100644
> > --- a/arch/arm/mach-tegra/Kconfig
> > +++ b/arch/arm/mach-tegra/Kconfig
> > @@ -10,6 +10,7 @@ menuconfig ARCH_TEGRA
> > select HAVE_ARM_SCU if SMP
> > select HAVE_ARM_TWD if SMP
> > select PINCTRL
> > + select PM
> > select PM_OPP
> > select ARCH_HAS_RESET_CONTROLLER
> > select RESET_CONTROLLER
> > --
> > 2.7.4
> >
> >
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
> According to speedtest.net: 11.9Mbps down 500kbps up
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-02-27 11:42    [W:0.072 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site