lkml.org 
[lkml]   [2019]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 8/8] arm64: dts: qcom: sdm845: Add Q6V5 MSS node
Hi,

On Tue, Feb 5, 2019 at 9:13 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> From: Sibi Sankar <sibis@codeaurora.org>
>
> This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v5:
> - None
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 560c16616ee6..5c41f6fe3e1b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1612,6 +1612,64 @@
> };
> };
>
> + mss_pil: remoteproc@4080000 {
> + compatible = "qcom,sdm845-mss-pil";
> + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
> + reg-names = "qdsp6", "rmb";

I found that when I disabled IOMMU bypass by booting with
"arm-smmu.disable_bypass=y" that I'd get this failure:

---

[ 13.633776] qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss
[ 13.647694] arm-smmu 15000000.iommu: Unexpected global fault, this
could be serious
[ 13.660278] arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0
0x00000000, GFSYNR1 0x00000781, GFSYNR2 0x00000000
...
[ 14.648830] qcom-q6v5-mss 4080000.remoteproc: MPSS header
authentication timed out
[ 14.657141] qcom-q6v5-mss 4080000.remoteproc: port failed halt
[ 14.664983] remoteproc remoteproc0: can't start rproc
4080000.remoteproc: -110

---

Adding "iommus = <&apps_smmu 0x781 0>;" here fixed my problem. NOTE
that I'm no expert on IOMMUs so you should confirm that this is right,
but if it is then maybe you could include it in the next spin of the
series? I got the "0x781" just by looking at the value of the GFSYNR1
in the above splat. I wasn't sure what to put for the mask so I put
0x0.


-Doug

\
 
 \ /
  Last update: 2019-02-27 00:55    [W:1.027 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site