lkml.org 
[lkml]   [2019]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.20 126/183] net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames
Date
4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Saeed Mahameed <saeedm@mellanox.com>

[ Upstream commit 29dded89e80e3fff61efb34f07a8a3fba3ea146d ]

When an ethernet frame is padded to meet the minimum ethernet frame
size, the padding octets are not covered by the hardware checksum.
Fortunately the padding octets are usually zero's, which don't affect
checksum. However, it is not guaranteed. For example, switches might
choose to make other use of these octets.
This repeatedly causes kernel hardware checksum fault.

Prior to the cited commit below, skb checksum was forced to be
CHECKSUM_NONE when padding is detected. After it, we need to keep
skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to
verify and parse IP headers, it does not worth the effort as the packets
are so small that CHECKSUM_COMPLETE has no significant advantage.

Future work: when reporting checksum complete is not an option for
IP non-TCP/UDP packets, we can actually fallback to report checksum
unnecessary, by looking at cqe IPOK bit.

Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -620,6 +620,8 @@ static int get_fixed_ipv6_csum(__wsum hw
}
#endif

+#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN)
+
/* We reach this function only after checking that any of
* the (IPv4 | IPv6) bits are set in cqe->status.
*/
@@ -627,9 +629,20 @@ static int check_csum(struct mlx4_cqe *c
netdev_features_t dev_features)
{
__wsum hw_checksum = 0;
+ void *hdr;

- void *hdr = (u8 *)va + sizeof(struct ethhdr);
+ /* CQE csum doesn't cover padding octets in short ethernet
+ * frames. And the pad field is appended prior to calculating
+ * and appending the FCS field.
+ *
+ * Detecting these padded frames requires to verify and parse
+ * IP headers, so we simply force all those small frames to skip
+ * checksum complete.
+ */
+ if (short_frame(skb->len))
+ return -EINVAL;

+ hdr = (u8 *)va + sizeof(struct ethhdr);
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);

if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_CVLAN_PRESENT_MASK) &&
@@ -822,6 +835,11 @@ xdp_drop_no_cnt:
skb_record_rx_queue(skb, cq_ring);

if (likely(dev->features & NETIF_F_RXCSUM)) {
+ /* TODO: For IP non TCP/UDP packets when csum complete is
+ * not an option (not supported or any other reason) we can
+ * actually check cqe IPOK status bit and report
+ * CHECKSUM_UNNECESSARY rather than CHECKSUM_NONE
+ */
if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP |
MLX4_CQE_STATUS_UDP)) &&
(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&

\
 
 \ /
  Last update: 2019-02-25 22:35    [W:0.425 / U:6.464 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site