lkml.org 
[lkml]   [2019]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 7/9] arm64: dts: qcom: add PDC interrupt controller for SDM845
    Date
    Add PDC interrupt controller device bindings for SDM845.

    Signed-off-by: Lina Iyer <ilina@codeaurora.org>
    ---
    Changes in v2:
    - Use updated address specification in reg
    - Rename to pdc_intc
    - Sort per address in DT
    ---
    arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
    1 file changed, 9 insertions(+)

    diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
    index c27cbd3bcb0a..e55100c2705e 100644
    --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
    @@ -1534,6 +1534,15 @@
    #power-domain-cells = <1>;
    };

    + pdc_intc: interrupt-controller@b220000 {
    + compatible = "qcom,sdm845-pdc";
    + reg = <0 0x0b220000 0 0x30000>;
    + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
    + #interrupt-cells = <2>;
    + interrupt-parent = <&intc>;
    + interrupt-controller;
    + };
    +
    tsens0: thermal-sensor@c263000 {
    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
    reg = <0xc263000 0x1ff>, /* TM */
    --
    The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
    a Linux Foundation Collaborative Project
    \
     
     \ /
      Last update: 2019-02-22 23:20    [W:4.096 / U:0.180 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site